Xerox Printer Setup

Steps for Xerox Phaser 6510 Color Laser Printer Setup

After purchasing your brand new Xerox Phaser 6510 color laser printer if you want to know the exact process to set it up, then you are in the right place. The setup process of the printer is really simple on Windows. In this article, we are going to provide you the quickest and easiest way for Xerox Phaser 6510 color laser printer setup. So, go through the article carefully, and perform the given steps one by one and complete the task successfully. Let’s begin with the process:

The Proper Steps to Follow for Xerox Phaser 6510 Color Laser Printer Setup using Installer

With the help of the Xerox Installer you can automatically perform the following functions in your Windows device to set up your printer device without any hassle:

  • First of all, you have to locate your printer on your network to start the setup process.
  • If an IP address has not already been assigned to your printer, then you need to assign one to your printer. You can also get an automatically assigned IP address or you can assign a different IP address to your printer device.
  • Now, you need to install the printer driver for your Xerox printer. To do so, you have to go to the official page of the Xerox printer. And there, you have to follow the onscreen instructions to complete the installation.  

The Procedure to Connect the Printer to a Wired Network

You can use an Ethernet cable to connect the printer to the home or office network, to which your computer is connected. You need to use a router or network switch to connect your printer and computer as you cannot connect them directly. And an Ethernet network is able to support one or more computers and printers at the same time. Ethernet connection allows you to get direct access to the settings of the printer and it is actually faster than USB cable because of Embedded Web Server.

It is worth mentioning that if you don’t get the network switches, routers, modems, USB cables, and Ethernet cables with your printer then you need to purchase them separately.

Now let’s begin with the process to connect the printer to a wired network.

Step 1

First of all, to start the process you need to attach a good quality Ethernet cable from the printer to your network or router socket. You need two or more Ethernet cables, and an Ethernet switch or router to complete the task. With one cable, you have to connect the computer to the switch or router. You need the second cable to connect the printer to the switch or router. Remember, you can connect the Ethernet cable to any port on the router except only one port and that is the uplink port.

Step 2

After performing the above step, now, you have to attach the power cord, and then plug the printer in. And after that, you have to turn the printer on.

Step 3

Once you are done with the previous step, you need to set the network IP address of your printer. And you can even set your printer up for automatic detection of the printer’s IP address. Here, we will recommend you to set a static IP address that will prevent any hassles in the future.

Conclusion

Hope the above steps have helped you to set your printer up in a proper manner and without any hiccups. If still are facing any kind of problem regarding Xerox Phaser 6510 color laser printer setup, then you need expert help. And, if you have completed the task with the help of this article then we are happy for you. You can place comments in the comment section and tell us your view regarding this article. You and your views are equally important to us. Thanks for visiting us and for more useful articles like this one, stay connected to us.