The IP address is a unique address of an individual system, which is used for connecting the devices to the network. There are many Windows users who are encountering the “ Windows has detected an IP address conflict” issue in their PC. This error actually arises when there occurs some problem in the settings of the computer and router. If you are also encountering this error, then without wasting any time, read this article to get some effective ways to sort out this error.
Whatever be the reason behind the IP address conflict, thankfully, there are several simple methods as well which you can try on your own to get rid of this critical error. Just follow this post and have a look at the troubleshooting steps that have been described here.
If your Windows has detected an IP address conflict, it can be because of any complications in the network configuration. Thus, you can solve this issue by simply restarting your router. For that, turn off your router by pressing the power button. Then, wait for about 30 seconds to turn on your router again. As soon as your router turns back on, check whether the issue gets resolved completely or not. Though this is a temporary solution, it should ideally fix the issue.
By using the Command Prompt option, you can fix this issue. You just have to get through the steps mentioned below:
After performing these steps, check if the issue is resolved.
According to the experts, some devices are only compatible with IPv4 and not with IPv6. Thus, your PC displays IP address conflict Windows 10. If this is the reason behind the error, then you have to disable the IPv6 option for fixing this error on your Windows PC. You can do that by following the steps given below:
After you have successfully disabled IPv6, you can check to verify whether the problem gets resolved or not.
If your Windows has detected an IP address conflict virus, then you can solve by simply disconnecting your Ethernet cable. Then, you can wait for a few seconds and check it again to see if the issue has resolved or not. On the other hand, if you are not using an Ethernet connection, then you can disable your wireless adapter to fix this issue. Follow the given steps to do that:
Once you are done with the procedure, you can check if the Windows IP address conflict is solved.
Some users set a static specific IP address to their device, as it makes it easier for them to locate the specific device on their network. But then, it sometimes causes IP address conflicts. So, to avoid this conflict, make sure that your device has a dynamic IP address, rather than a static IP address. You can easily do this by following these steps:
Finally, you can restart your PC and check whether the IP address conflict is resolved or not.
VPN tools are extremely used for protecting the privacy online. But under some circumstances, it becomes the cause for the IP address conflict, especially when their computer wakes from sleep mode. Thus, in order to fix Windows IP address conflict, you have to restart your PC and then reconnect your VPN service. With, the issue should get resolved entirely. But in case the issue persists, then move on to the next step.
By simply changing the encryption type on your router, you can solve this issue. For that, you have to first open the configuration page of your router. Then, log into it with the sign in details and navigate to the Wireless section. There, you will find the encryption field, go there and change WEP to WPA2-PSK. Most of the users have claimed that by doing this, their IP address conflict issue gets resolved. After you have made changes in the encryption type, make sure to reconnect the network on all the wireless devices.
If your Windows PC is displaying IP conflict error, you can easily fix it by setting a static IP address in your PC. But if you want to do this, then at first, you have to change the DHCP settings of your router. For that, you have to visit your router’s configuration page and then open the DHCP section. After that, you have to set the Address range from 192.168.1.5 to 192.168.1.50. Then, you can manually set your IP address between these two values through the Network Connections window and by following the prompt messages in it.
After trying out all these methods, there is a good chance that the “Windows has detected an IP address conflict” issue will be solved, but in case the issue persists, then don’t hesitate to contact a professional for resolving the problem at the earliest.