Type to search

Troubleshoot Printer Error Code 0x803c010b With Ease

Printer error code 0x803c010b is one of the most common errors you may encounter while using your printing device. If you have already faced this issue and don’t know how to troubleshoot it, then try to follow this article till the end to perform the task. Before going on that part, at first, let’s focus on the details about this error.

What Is Printer Error Code 0x803c010b?

Printer error code occurs with the operating system while your printing device encounters a problem related to your SNMP.

When this error crops up, then you can notice that the active printing task crashes and you encounter an error message on your computer screen showing” printer error code 0x803c010b”.

What Causes Printer Error Code 0x803c010b?

You can encounter this error due to a misconfiguration of SNMP as to which protocol manages the devices presented on the network and which also supplies information for the printers to your computer.  As some of the printers don’t support this protocol that’s why you can encounter this error with your printer.

Troubleshooting Hacks To Fix Printer Error Code 0x803c010b

Here, experts have provided more than one hacks to troubleshoot this issue quickly. Try to follow all of them carefully and learn how to fix printer error code 0x803c010b. On that note, don’t jump any step, try to follow all of them.

Method 1:  Disable SNMP

You can troubleshoot this error by changing the SNMP. On that note, try to perform the steps as mentioned below.

  1. At first, Press Win + X  key to open the control panel to open control panel. You can also use the start option to open this window.
  2. Now, Select Devices and printers from the list.
  3.  Right click on the printer.
  4. Select the Printer properties.
  5. A new window will open after performing this step.
  6. On that Window, go to the Ports tab and navigate through the list of ports to select Standard TCP/IP Port.
  7. Make the box against be checked against this option and click on Configure Port button situated just below the ports section.
  8. After that,  go to SNMP Status Enabled and uncheck the box as shown in the picture below.
  9. Now, Click on the OK button and apply the settings afterwards. Reboot your PC and check if it worked.

Method 2: Reinstall Printer Device

If the error persists even after performing previous the steps, then try to focus on this step as an alternative method. To perform so, go to the search option and perform the steps as mentioned below.

  1. At first, Go to Control panel and select Devices and Printers.
  2. Now, Right click on the printer causing the error.
  3. After that, Select Remove device and click on Yes at the prompt window.
  4. After this process, the selected device will be removed from the PC. Now, unplug the printer and restart your PC.
  5. After the PC is restarted, plug in the printer again in order to reinstall it along with its drivers.

After performing the steps you will be able to troubleshoot this error on your own. Simply, try to follow all of them carefully.