A lot of Windows users often encounter the DISM error 87 on the Windows 10 screen when they are trying to run the DISM from the Command Prompt. Once this error code appears, then an error message ‘The Parameter is Incorrect’ continuously appears on the screen. As a result, it will restrict you to copy any file.
However, this is a quite common problem and you can easily troubleshoot it. Therefore, if you encounter this error code on your system and want to know how to resolve it immediately, then you should stay in this article. Here we are going to discuss some valuable points which will surely help you to fix the problem immediately.
There are several reasons that can lead to DISM error 87. Here, we have highlighted a few of them. You should read them carefully so that you can take precautions for the next time. Check them out.
This is the most common causes for the occurrence of the DISM error 87 Windows 10. Most of the time you might face the problem if you give an incorrect space before each ‘/’ character. If you face this error code, then the best solution is to use the correct space.
This is another common reason for this DISM error. If you try to run the DISM tool into the elevated prompt and if it is not running, then sometimes for this you might deal with this error code.
You might also face this problem if your Windows 10 is using an old version of the DISM tool.
These are some common reasons, now go through the rest of the article as here we are going to discuss some easy and effective techniques that will surely help you to fix the issue instantly.
You can fix this DISM issue in several ways. Here we have listed some of the top-rated solutions and with the help of them, you can resolve the problem on your own.
At first, we suggest to restart your system and check if the issue has been resolved or not. For that, you need to go to the Start Menu and tap on the Shutdown menu. Next, you should click on the Restart option. Now, you need to wait sometimes to reboot your machine. That’s it. Now, try to run the DISM tool into the command prompt. If it is working, then your job is over. Otherwise, go to solution 2.
This is another alternative solution that you can apply to fix the issue. Multiple Windows 10 users reported that they try this solution and it really works for them. Therefore, we advise you to apply this solution on your system. To do so, you need to follow the undermentioned steps.
In the beginning, go to the Start Menu and then search for the PC Settings.
Next, you should navigate to the Troubleshoot option. After that, click on it and then a new window will appear on the screen.
Once the new page opens, then you should drop down and tap on the Advanced option. From there, you need to navigate to the Automatic Repair section.
Next, you should wait for sometimes until the repairing process is completed. Once done, then close the Troubleshooting tab and exit from the page.
Then, reboot your Windows 10 device and check if any change is made or not. If unfortunately not, then do not panic, we provide another easy solution for you.
As we have mentioned earlier, due to the incorrect spacing, you might face the DISM error 87 on your display. So, rather than running a command like ‘DISM.exe/Online/Cleanup-image/Scanhealth’, you should make sure that you use one space before each ‘/’ character. The correct arrangement of the command should be:
DISM.exe /Online /Cleanup-image /Scanhealth
Or
DISM.exe /Online /Cleanup-image /Restorehealth
Once you become sure that you have entered the correct syntax, then you need to press the Enter button to save the changes. Finally, restart your machine and if you are still dealing with this problem, then here is another alternative for you.
If you already applied the above three solutions and none of them bring the required result for you, then we suggest you perform a clean boot operation. In order to perform this task on your device, you should follow the steps which are given below.
At first, you should go to the Home Screen of your Windows 10 device and click on the Start menu. Then, you need to type ‘msconfig’ within the search field and hit the Enter button.
Then, a new page will appear on the screen. From there, you have to scroll down below until you see the System Configuration option. Once you have found, then click on it to open the System Configuration box.
After that, go to the Services tab. Here, you have to mark the dialog box which is located beside the ‘Hide all Microsoft services’ option.
After that, you have to click on the Disable All option. Then, go to the Startup tab and click on the Open Task Manager option. Next, you have to close the Task Manager and exit from the page.
Finally, reboot your machine and now you will get a clean boot environment after following these above steps. However, if the DISM issue still persists, then have a look at the next solution.
If none of the above solutions work for you, then we recommend you to run the ‘regit’ command and fix the DISM error 87 on your own. In order to apply this solution on your device, at first, navigate to the Start menu and after that, open a Run dialog box by pressing the Windows + R keys simultaneously. Once the Run dialog box opens, then you have to type ‘regit’ within the given field and hit the Enter key.
Next, a new window will pop up on the screen. Here, you can see a lot of options. You should search for the windows key that might locate on the right side of the editor. Thereafter, you need to double click on the ‘LoadApplnit_DLLs value’. Next, you should set the value to ‘0’. Then, you should exit from the Registry Editor page as well as close all the opening tabs. Again, restart your machine and if you are still unable to troubleshoot the issue, then proceed to the next solution.
Are you still facing this DISM error? Don’t worry, you can run the system file checker to troubleshoot the problem. Well, this is not a difficult task, here are the steps that you need to follow to apply this solution on your system.
At first, you need to click on the Start icon. After that, navigate to the search field and type ‘ CMD’. It will lead you to the Command Prompt window.
When the Command Prompt window opens, then you have to right-click on it and select Run as Administrator option. Next, you should type ‘sfc/scannow’ within the given field and hit the Enter button.
Then the scanning process will begin. You should wait sometimes and when the scanning procedure is completed, then reboot your machine and try to run the DISM tool again. However, if you can not, then have a look at the next solution.
The inbuilt app troubleshooter automatically fixes some problems that prevent the applications from running. So, if all the above solutions fail, then we advise you to use the Windows app troubleshooter and see if any change is made or not. To apply this solution on your computer, take a look below.
At first, you should right-click on the Start icon and choose the Control Panel. Next, you need to navigate to the top right corner and change the View by option to the Large icon.
Next, you should tap on the Troubleshooting option. Thereafter, go to the left panel and click on the ‘View all’ option.
Thereafter, you have to select the Windows Update option. Next, you should follow the online instructions carefully and, then hit the OK button.
You should wait for five to ten minutes until the completion of the procedure. Once done then restart your computer and check if the DISM error 87 has been resolved or not.
Sometimes due to the outdated display driver, you might encounter the error on your screen. In that case, you need to update the display driver. For that, you should right-click on the Start menu and from the available options, select the Device Manager.
Under the Device Manager section, you have to find the Display Adapters option. Once you found it, then you should tap on the Display Adapters to expand the full list of the adapters.
Then, you have to right-click on the Display Adapter option. After that, click on the Update Driver Software option.
Next, you need to tap on the ‘Automatic search for the updated driver software’ option. Finally, reboot your system.
You can also go to the manufacturer’s website and download the best-recommended driver for your computer.
Here is another alternative at your rescue. In order to use the System Restore, you should follow the steps which are mentioned below.
Navigate to the Start Menu. Then, you should search for the System Restore option. Then, click on it to open the System Restore.
Next, you should click on the ‘Recommended settings’ option. Once, you select it, then click on the Next button to continue the process.
Thereafter, you should follow the online instructions and tap on the Apply button. Once done, then close the tab and restart your machine and now the DISM error 87 will not irritate you anymore.
This is the last solution that you can try to troubleshoot this DISM problem. For that, you should go to the manufacturer’s website and search for the best-suited graphics driver for your device. Then download and install it on your computer. After that, follow the undermentioned process to install it in the compatibility mode.
That’s it. We believe these ten solutions are sufficient to fix the problem. Give your valuable feedback in the comment section below.