D-link Router Setup

How To Setup D’link n300 Wireless Router [Step-by-Step]

After purchasing a brand new D’link router, you have to perform the setup to make it work. Therefore, you need to know how to setup D’link n300 wireless router. Well, if you are a new user of D’link, then it will be a little difficult for you to perform this particular action. If you want to complete the setup but don’t know how to perform it, then go through this article. This article will help you out with the entire procedure.

Setup D’link n300 Wireless Router: Step by Step Guidance

Here is the step by step guide using which you will be able to perform this action on your own.

Quick Setup

In order to perform a quick set up try to perform the action mentioned below.

  1. At first, try to connect the power adaptor of your router to a wall socket as well as to your router.
  2. Once done, connect Ethernet cable to the WAN (or internet) port for the modem and router.
  3. Wait for some time until the router starts up along with the light indication.
  4. Once done, try to connect your computer or a mobile device.
  5. Now, look into the WiFi preferences and connect it to the WiFi name which you can find in the Wireless Configuration Card. When prompted, you have to enter the password. Situated in the card.

If this quick setup won’t work, then try to follow the next method mentioned below.

Alternative Method

You can perform the alternative method to resolve the matter as well. In that case, perform the following.

  1. At first, try to unplug the modem with the help of a Cable/DSL Internet Modem.
  2. Once done, try to connect an Ethernet cable from your computer or the laptop using the LAN port of your router.
  3. Now, try to connect the cable of the modem with the  Internet Port on your router.
  4. Once done, try to power on the router and the Internet cable of your modem.
  5. Now, open any internet browser and enter 192.168.0.1 into the address bar.
  6. You will be able to open the setup page.
  7. Follow the on-screen instruction to complete the procedure.

Final Remarks

In this article, we have explained the detailed procedure using which you will be able to perform the action on your own. In order to perform this particular setup without any hassle, try to follow each and every step carefully. Also, don’t skip any step. If you fail to complete the action or you encounter any kind of glitches while performing this, then try to inform us via your valuable comment. If you find this article helpful, then also you can let us know.

Call Now ButtonCall us Now
error: Content is protected !!