Top Fixes To Resolve The Windows Store Won’t Open Error

Microsoft Store won’t open or load on Windows 10 Operating System is the most frequent and general error that a lot of Windows users have experienced. To put it simply, the Windows Store does not launch on the system and keep waiting for the Windows store to show up. You may encounter this annoying error notification because of the Windows Store might have got damaged or corrupted. Also, this error notification may occur due to the intermittent internet connection, proxy server errors, etc.

Hence, if you are stuck with this Microsoft store won’t open Windows 10 error and wondering how to get rid of this issue, then your search ends with us. Thus, without delaying too much time, let’s get into the solutions directly and see how to actually eradicate this error notification with the below-listed troubleshooting guide.   

Windows Store Won’t Open: Effective Techniques to Fix

You may face this error due to several reasons and you may come up with various ways and methods to eliminate the Microsoft store won’t open or load error on the Windows 10 Operating System. But, you need the methods which can ensure the optimal solution in no time. Thus, take a look at the following section and try to perform the fixes carefully to get rid of this frequent error:

Way 1: Verify whether the Time and Date are Correct

This is the most fundamental way that you need to try to get rid of this error notification. Whenever the time zone of the system is different from the region, then there is a high chance that you may face this error notification while launching the app store. In order to get rid of this error, you need to verify the time and date are correct. To do so, follow the steps below:

1. Press down the Windows logo key and at the same time press down the “I” key on the keyboard. This key combination will open the Settings menu.
2. Now, tap on the Time and Language option.
3. Choose the Date and Time option under the Time and Language option.
4. Here, you need to adjust the exact time zone as per the region.
5. After completing all the above-described steps, restart the system.
6. At last, try to open the Windows Store and verify the error is fixed or not. In case, if the issue still persists, then you need to move out to the next troubleshooting method.

Way 2: Resetting the Windows Store Caches   

This Microsoft Store won’t open Windows 10 error notification can be fixed by resetting the Windows Store Caches by utilizing the Command Prompt. To perform this action, go through the following steps:

Resetting the Windows Store Caches Utilizing the Command Prompt:

You can easily reset the Windows store caches by utilizing the Command Prompt. To do so:

1. Go to the Start menu and tap on it to open. After that, open an elevated Command Prompt by right-clicking over the Start menu of the system.
2. Choose the Command Prompt (Admin) from the list.
3. Now, you need to write the following command in the command prompt.
4. Command: c:\winodws\system32>wsreset.exe.
5. After that, press down the Enter key on the keyboard. This process will definitely clear the caches of the Windows Store. Whenever the entire process is done, you need to verify the Windows Store if it works properly or not.   

Deleting the Local Caches Manually:

Also, you can delete the local caches by applying the manual steps. The steps are described hereunder:

Note: Before proceeding further, you need to ensure that the hidden files of the system are visible. To accomplish this task, open any folder and go to the View panel. You may get this option at the top of the folder. Tick on the checkbox titled as hidden items, in the View panel. This process will unhide the files.  

1. At first, you need to navigate to the folder which is stated below and remove all the files present in that particular folder.
2. “C:\Users\user_name\AppData\Local\Packages\Microsoft.WindowsStore_8wekyb3d8bbwe\LocalCache”
3. You need to keep in your mind, the user name would be different as per your user account.
4. After completing all the steps to delete the files, restart the system for good measure.

At last, open the Windows Store again to verify if the error notification is fixed or not. In case, if the error notification still continues then, you should move out to the next troubleshooting method.

Way 3:  Registering the Windows Store

In case, if the process mentioned above wasn’t successful in sorting the issue out, then you can follow the steps below:

1. Press down the Windows logo key and at the same time press down the “S” key from the keyboard to launch the Cortana Search bar.
2. Now, type the Powershell in the Cortana Search bar. Tap on the Powershell and run it as an administrator.
3. Now, you need to run the following command to re-register the Windows store application in the Powershell. Copy the command and paste it.  
4. Command: “PowerShell -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\WinStore\AppxManifest.xml”
5. After that, press down the Enter key on the keyboard to execute and re-register the store.
6. After completing all the above-described steps, restart the system for good measure.

At last, open the Windows Store again to verify if the error notification is fixed or not. In case, if the error notification still continues then, you should move out to the next method given below.

Way 4: Cannot Find AppxManifest.XML

After performing the method no 3, if you encounter an error notification which simply states that “Cannot find path ‘C:\WINDOWS\WinStore\AppxManifest.XML’ because it does not exist.”. Then, you need to execute the two commands in the Powershell. To do so:

1. Press down the Windows logo key and at the same time press down the S key on the keyboard to launch the Cortana Search bar.
2. Now, type the Powershell in the Cortana Search bar. Tap on the Powershell and run it as an administrator.
3. Now, you need to run the following command. Copy the command and paste it.  
4. Command: “Set-ExecutionPolicy Unrestricted”.
5. Press down the Enter key on your keyboard.
6. After that, again, copy and paste or type the below mentioned command.
7. Command: “Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml”}”.
8. Press down the Enter key on your keyboard.
9. Restart the system.
10. Now, very the system if the error notification is resolved.

Way 5: Change the DNS Server

If the local cache solution did not work for you, then you can try to change the DNS server of the system. Here’s what you require to do to change the DNS server:

1. At first, go to the Start menu of the system.
2. After that, tap on the Control Panel in the Start menu.
3. Now, select the Network Connection under the Control Panel menu.
4. Select the network connection that you are utilizing. Right-click on the network connection. Choose the Properties option of the network connection.
5. Next, you need to scroll to the internet protocol version 4 (TCP/IPv4). Select the Properties option.
6. Now, utilize the following DNS server addresses.
7. You need to enter the 8.8.4.4 as Alternate DNS Server and 8.8.8.8 as a preferred DNS Server.
8. After entering the above DNS server addresses, tap on the Ok button.
9. Choose the Save button to save the changes that you have made.
10. After completing all the above-described steps, restart the system.

Finally, open the Windows Store again to check if the error notification is resolved or not. In case, if the error notification still persists then, you should move out to the next troubleshooting method.

Way 6: Repair your Registry

This annoying Windows store won’t open error notification on the Windows 10 system due to the damaged registry keys and files of the system. Additionally, the easiest way to repair the registry files is to utilize the System File Checker to check for the corrupted system files:  

To run the System File Checker, go through the steps that follow:

1. On your keyboard, press down the Windows logo key and at the same time press down the “S” key to launch the Cortana Search bar.
2. Now, write ‘cmd’ in the Cortana Search bar.
3. After that, right-click on the Command Prompt icon and choose the ‘Run As Administrator’ option.
4. Next, write the ‘sfc/scannow’ command in the  Command Prompt. Press down the Enter key on the keyboard.
5. Now, the System File Checker tool will start the scanning process for technical errors and damaged files in the system.
6. The scanning process may take some time to completes. Therefore, you may need to wait until the entire scanning process completes.
7. After completing the scanning process, restart the system.

Lastly, verify the system to see whether the error notification has resolved. In case, if the error still persists, then move out to the below fixes.

Way 7: Clean Boot the System  

A clean boot starts the Windows system by utilizing the startup programs and a minimal set of drivers to prevent software conflicts. Additionally, such software conflicts may happen whenever you install an application or update an application or whenever you simply launch a program. To clean boot the system:

1. On your keyboard, press down the Windows logo key and at the same time press down the “S” key to launch the Cortana Search bar.
2. Now, write “System Configuration” in the search box. And then, press down the Enter key.
3. Go to the Services tab. Next, choose the Hide all Microsoft services option in the Services tab.
4. Tap on the Disable all option.
5. Now, go to the Startup tab. Now, tap on the Open Task Manager option in the Startup tab.
6. In the Task Manager menu on the Startup tab, choose all items in the Task Manager. Tap on the Disable option.
7. Once done, you need to close the Task Manager.
8. Tap on the Ok button on the Startup tab of the System Configuration Dialog box.
9. After completing all the above-described steps, restart the system for good measure.

Way 8: Disable the VPN or Proxy

In order to resolve this error notification, you need to disable the VPN or Proxy. To do it, follow the steps below:

1. At first, go to the Start menu of the system.
2. After that, tap on the Control Panel. Choose Internet Options.
3. Now, open the Connections tab.
4. Tap on the LAN settings.
5. Next, untick the checkbox beside ‘Use a proxy server for your LAN’.
6. Tap on the Save button to save the changes.

Ending Note

In this informative post, we have talked about the most effective and easy troubleshooting hacks by which you can easily get rid of this Microsoft store won’t open Windows 10 error. Hopefully, the above-stated ways will help to resolve this error notification within a flicker of time. Try to perform the troubleshooting hacks and see which one is giving you the ultimate troubleshooting solution in no time. In case, you face any confusion or trouble while performing the above-mentioned ways and steps then, please let us know in the comment section below.