Type to search

An Easy Guide To Resolve HP Scanner Error 22

HP scanner is always the first choice for users, but due to some technical faults, often it is found that the users get frustrated while working with HP scanners. One of the most common errors that frequently appears while working on the HP scanner is HP scanner error 22. This error may appear due to applying some extra pressure to the scanner glass at the time of scanning. When you try to scan documents or files, then if suddenly an error message appears on your screen, then it might annoy you. Usually, the weight or pressure sometimes hamper the scanner mechanism due to which this error occurs. However, you want to immediately get rid of error code 22 in the HP Laserjet Pro Scanner.

The error code 22 is quite common in the HP scanner and if you are frequently encountering the error, then you need to solve the error code as early possible. Otherwise, you are not able to scan any documents or files. Hence, in this article, we have come up with some effective solutions in order to fix the error code. So, read them carefully and apply them carefully.

Major Causes Behind The Error Code 22:

There are several reasons responsible for the HP scanner error 22. The major ones are as follows

  • Scanner not detecting the computer properly.
  • If there is a conflict between the scanner and your system.
  • The error code 22 can also appear when there is a problem with the power connector.

To resolve the issue, you need to know the procedures for how to fix HP scanner error 22. If you are one of the users looking for effective solutions, then read the section below.

Steps and Procedures to Solve HP Scanner Error 22 Effectively:

This particular issue is related to the printer’s Control panel when you try to scan from the HP printer. Here are some fixes that you can try to troubleshoot HP scanner error 22. Hence, follow the steps that are mentioned in the section below.

Method 1: Check the Power Cable

In order to fix the issue, you need to follow the steps as described in the section below. It is recommended not to skip any steps.

Step 1

At first, turn on your printer. To proceed further, wait until your printer comes into its idle steps.

Step 2

After that, disconnect the power cable from the area of the wall outlet and wait for a minute.

Step 3

Next, connect the power cord back to the area of the wall outlet. Then, connect the power cord utility back to the rear of the printer again. After that, power on the printer.

Step 4

The scanner may now go through a warm-up phase where the scanner lights may be flashing. After that, the cartridges may move thereafter. You should wait until the warm-up period finishes.

At last, you need to check whether the issue gets resolved or not.

Method 2: Restart the Scanner

If you are facing the error code 22 on your HP scanner, the most effective solution will be to restart the scanner. To do so, at first, you need to power off the scanner and remove all the cables and cords that are connected with the scanner. After that, wait for a while and then connect all the power cords to the scanner. Then, power on the scanner.

Method 3: Update the Scanner Driver

Another effective solution is to update the scanner driver. You need to check whether an update is available for the scanner driver. To check, firstly, go to the Control Panel option. After that, click on the Programs and Features option and search for the Programs option. Then, find the scanner driver and download the latest updated version and install it on your system. After completing the process, restart the system and the scanner. Now, check whether the error code still persists or not.

Hopefully, using these fixes, you will be able to fix the situation of HP scanner error 22 on your own. Try to follow every step carefully and apply them accordingly. If you encounter any difficulties in any steps, you can post your queries in the below comment box.