“Hard drive short DST check failed” error message indicates that your device has experienced a hard failure. And, in some cases, users require to replace the faulty part. Most of the cases, such kind of hard drive related issues can occur due to the CPU failure. But, in some other instances, HDD fails to overcome the self-test and crashes the Operating System. If your hard drive is in the warranty period, then you can opt for onsite service and replace the faulty one. But, if not, then you need to proceed to the troubleshooting steps in order to resolve the hard driver short DST check failure issue on your Windows 10 device.
Here, in this post, you will get to know various easy and effective solutions that you can apply in your Windows 10 device to resolve this hard driver glitch. Thus, take a deep look to right below.
Once the ‘hard drive short DST check failed” error message pops up on the display screen, your device will begin malfunctioning in the following ways:
These are the major symptoms that indicate severe hard disk failure. Most of the users have reported these factors when they found hard drive dst short test failure error message on their device. But, a few users have also complained about other factors as well. Thus, you can make sure that when this hard drive error message appears, there are various situations that can appear. So, resolving this issue is quite challenging for users.
According to users, they often find that the hard drive short DST check failed issue, due to a number of reasons. Hence, here, we have enlisted the most obvious reasons that are the prime causes of this issue.
Incorrect order of boot devices in BIOS is the foremost cause for this “hard drive short DST check failed” error message. Usually, according to the boot device order, BIOS tries to find a bootable drive, so if floppy drive is set to a higher priority than a hard drive and a hard disk is inserted there – in that situation, the device tries to boot from a floppy disk and as a result “hard drive DST short test fail Windows 10” error message displayed.
Over time, faulty data cable can also lead you to the “hard drive short DST check failed” error message. Therefore, if you use a particular data cable for a long time, this might affect the loading process and resulting such hard driver error occurs.
Sometimes, due to the read/write errors, virus attacks, or power outages, the hard drive can become inaccessible or damaged. If that is a fact, then the drive needs to be scanned for viruses and checked for error in order to make sure that is works correctly.
These are the most common reasons behind the “hard drive short DST check failed” error messages. There can be some other relative causes as well. But, whatever be the cause, resolving such kind of hard driver issue can always be a great deal for the users. So, we think, without wasting more time, you should move on to the troubleshooting section.
Here, in this section of the article, we have mentioned the most efficient workarounds along with the complete steps for eliminating such kind of “hard drive short DST check failed” error message from your device. However, it is suggested you apply them in the same order as we have mentioned. So, let us proceed:
As a primary solution, it is recommended you to change the BIOS boot order in order to resolve the hard drive short DST check failure issue on the Windows 10 device. Therefore, to check your PC’s boot order, you have to look below. But, before proceeding with this solution, you can restart your Windows device and then, follow these steps:
Lastly, restart your device and check whether the issue has been resolved or not. If not, then you have to restart your PC.
After changing the BIOS boot order, if you still face the same error message in your Windows 10 device, then there are some other issues that could be responsible for this hard drive related problem. And, if you have recently installed new hardware, then it might create such hard driver issue. In such situations, you have to follow the below tips that might help you in resolving “hard drive short DST check failed Windows 10” error message.
Furthermore, you can also fix the hard drive short DST check failed issue by simply running the CHKDSK utility tool. This is a reliable tool that can detect if the device’s hard disk has some problems. Therefore, to run this utility tool, you need to follow these steps:
WMIC is a command line that allows you to perform various administrative tasks including checking hard disk health. It uses the S.M.A.R.T features of the hard disk in order to check the status and provide a generic conclusion like “Pred Fail,” or “OK” etc. It is an in-built feature of Windows and this is quite easy to perform.
Therefore, in order to check a hard disk with WMIC, you require to press the Windows Home Key + R key altogether. This action will bring up the Run dialog box. Now, in the Run dialog box, write “cmd” and press the Enter key or click on the OK button in order to begin the Command Prompt. Once the Command Prompt opens, just enter “WMIC” and press the Enter key. And, once the WMIC interface is ready, you need to write “diskdrive get status” and hit the Enter key again. After a short delay, you’ll see the status of your hard disk. If everything is in the normal state, then reboot your device. Now, your hard disk related issue should be eliminated.
We hope that the above information is enough to fix the hard drive related issues on Windows 10 device. Thus, it is recommended to read this entire article and apply the above methods. Hopefully, after following the methods, the DST short test sends a good indication on the new drive. For further information, stay with this article. On the other hand, you can also take expert assistance for instant help.