The Netgear CM500 is a high-speed modem that gives a connection to high-speed cable Internet up to 680 Mbps speeds. This modem is approved by most of the cable Internet service providers. It is a type of Gigabit Ethernet port that can offer quick access as well as very fast downloads. Besides, this cable modem also supports the IPv6 and IPv4 assignments addresses by the cable Internet service providers as well.
So, if you are using the Netgear CM500 modem for the first time and unaware about the setup procedure, then nothing to get worried about this. Here in this guide, we are going to discuss the Netgear CM500 Setup procedure in details. Hence, you are advised to go through the entire article carefully. So, let’s start.
Netgear CM500 Setup: Try Out the Easy and Effective Process!
Follow the steps given below to perform the Netgear CM500 Setup procedure. Doing the procedures carefully will help you to get the most fruitful results on the go:
Step 1: Collect the Information from your Cable Internet Service provider
Before going to the setup procedure, first, you need to connect with the service provider of the Internet. Ask them to provide the information regarding the account number of the cable, phone number of the account, and finally the login information such as the user name and the password of the email address.
Step 2: Connect the Coaxial Cable
After collecting the information regarding the connection you are using, you have to connect the coaxial cable. Here you need to use that coaxial cable which is given by the cable Internet service provider. Connect the cable with the cable line splitter or the wall outlet. Now, you need to make sure that you connect the cable tightly.
Step 3: Connect the System with the Cable Modem
In this step, use the Ethernet cord which comes with the cable modem. Connect the ethernet cord of the modem with the Computer. After that, you need to restart your system.
Then, install as well as activate the modem. Now, disconnect the system and reconnect the router with the cable modem.
Step 4: Connect the Power Adapter
After that, connect the power adapter with the cable modem. Then plug in the power adapter to the power supply.
Step 5: Wait for the Cable Modem to Come Online
This is a quite time taking step. It will take minimum 10 minutes time to complete. You will see the LED light stops to blink as well as it becomes solid green. Now you need to understand that the cable modem proceeds online.
Now, you have successfully completed the initial Netgear CM500 Setup procedure. After that, you only have to set up the Internet service.
Step 6: Setup the Internet Service
Stick to the steps given below to set up the Internet service:
- At first, you need to contact the cable Internet service provider.
- Check with the cable Internet service provider to make sure that your cable modem is supported the cable network. Because some cable modem might not be supported with specific cable channels.
- If your cable modem is supported the cable network, then you need to confirm the cable Internet service provider that you are going to install a new cable modem.
- You need to provide the model number of the cable modem to your cable Internet service provider.
Perform a Speed Test:
If you want to determine the actual Internet speed of your modem, then you need to visit the website of the speed test of the cable Internet service provider to perform the speed test. If you see that the actual speed is below the subscribed speed, then you need to connect with the cable Internet service provider.
Connect the Router:
After installing the cable modem you need to activate it. Then you need to disconnect the system as well as connect the router with the cable modem. In order to do it successfully, you need to perform the steps given below:
- At first, you have to reboot the cable modem. To reboot the modem you need to unplug the power cable from the cable modem. Then, again you need to plug in it back. Now, you need to wait for a few time till the Internet LED stop to blink as well as the light becomes solid green.
- Now, use the Ethernet cord to attach the Ethernet port with the cable modem with the Internet port or WAN on your router.
- Then, you have to turn the router on and wait until the router is online.
- After that, you have to connect the computer with the router.
On the Whole
In the above post, we have provided some easy Netgear CM500 Setup procedure. We hope, after successfully performing the above steps it will help you to ease up your pain. After following the above post, if you still face any kinds of issues then you need to connect with a tech expert. Additionally, you also can share your issues as well as your valuable feedback in the comment section given at the end of this post.
