NetGear AC1900 Setup – Efficient Setup for an Efficient Wifi Range Extender
NetGear is one of the most common names when it comes to network routing devices. They make premium quality network routers, Wifi repeaters, and range extenders. These devices perform an absolutely fantastic job when it comes to providing you seamless, high-speed internet connection. The AC1900 Wifi range extender is among one of the best in the series, as well as in that price bracket generally. If you have got yourself this powerful network device. Then you will definitely need to perform the NetGear AC1900 setup.
As that process can be a bit technical, a lot of people hesitate from doing it by themselves. But that is not going to be the case for you, as with all the comprehensive instruction that you will find here. You will be able to set your NetGear AC1900 Wifi range extender in a simple manner.
Your level of technical expertise will not matter as we have broken down the instructions into simple steps. And you will set this device up in no time whatsoever.
Wifi Range Extender NetGear AC1900 setup: Why Do It?
It is important to discuss a little bit about what a Wifi range extender is. Before we go ahead and set this one up, have a thorough look below:
So, when you are using a network router to create an area in which you will be able to connect to the internet access point. It might be the case that there comes a time where you want to connect to the internet. But this should be over a much wider area than before.
That is where you would need to bring in a Wifi range extender and it does exactly what it says. It will extend the range within which you will be able to connect to the internet from those access points. And NetGear AC1900 is definitely among the top Wifi range extenders that you can use. And to get the best out of it, it is essential to set it up properly.
Wondering why you might need to carry out the NetGear AC1900 setup? The first reason is to secure the Wifi signal from any kind of external threats in terms of hackers. And it is always best if you can keep your network secure. That will be very important if you work with important data that you need to keep safe.
Other than this, if you properly do the NetGear AC1900 setup then that will help you avoid a lot of technical glitches that might have come your way. And finally, when it comes to a Wifi range extender, configure it depending on the type of router you are using it with along with the type pf internet connection as well.
Because if the NetGear AC1900 Wifi range extender configuration does not have all the necessary configurations in place. Then, it will not properly and in some cases, would not work at all. So, now that you know why you need to do the NetGear AC1900 setup. Let us go ahead and see how we can do it in the simplest ways possible.
How to Complete the NetGear AC1900 setup? Stepwise Instructional Guide
In this section, we will walk you down through the simplest ways in which you can go about setting up this device. There can be 2 scenarios basically, one is if the router has a Wifi Protected Setup (WPS) button and the other is if it does not.
As such, we have listed the processes for both of these scenarios. So follow this guide and properly configure the NetGear AC1900 Wifi range extender.
No WPS Button on the Router
If this is the case for you, then here are the things that you need to do.
- Step 1: Fit the antennas on to the range extender device after removing the caps. And then set them into position.
- Step 2: Turn the power of the device on after plugging it into a power source.
- Step 3: Go to your computer, and then connect to the signal coming from the Wifi range extender. You can use the Ethernet cable as well for the connection.
- Step 4: Now open up the web browser and go into the login page. Put all the necessary information for that and login to the control software of NetGear.
- Step 5: Take this range extender to a new location from the usual one, in between the router and the target area. It is best to keep it at half the distance in between.
Now, you will have to keep shifting positions till you find the signal is working alright. Once you get that, you will notice that the LED indicator will turn green.
That will complete the setup process for this range extender.
In case you have the Wifi Protected Setup (WPS) button on the router that you are using. Then the process for setting that up will be as follows.
- Step 1: Mount the antennas on to the Wifi range extender after removing the caps. Then set them into proper position.
- Step 2: Now switch the NetGear AC1900 Wifi range extender on after plugging it into a source of power.
- Step 3: Next, connect to the signal from your Wifi router and then press the WPS button on the body of the router.
- Step 4: After a couple of minutes the Link Rate LED will blink green to indicate the establishment of a successful connection.
- Step 5: After this, you will have to set up a new band, which you can do from the router itself. And to indicate successful completion of that, wait for the Link Rate LED to turn green.
- Step 6: The extender is now connected to the signal from the router properly. Move this around to find the perfect connection spot. Which will be within the normal range of the router.
- Step 7: Finally, take the extender and place it near the target area that you want to cover.
This completes the NetGear AC1900 setup process for this brilliant Wifi range extender device.
Now, you will be able to get a solid internet connection signal in a bad location within the range. Or better yet, increase the effective range of the network router that you have.
