Netgear is one of the most popular routing devices at present. So, it becomes a preferable one among the users. After buying this product, the first thing which you have to perform is a Netgear AC1750 router setup. If you have already bought a brand new router and unable to perform its setup, then let us guide you. This article consists of a step by step guidance which will help you out. You can go through it and complete the setup process with it.
Steps for Netgear AC1750 Router Setup
Here is a step by step guide using which, you will be able to perform the task on your own.
Step 1: Make Sure the Internet Connection is Working
In order to set up your router, at first, you have to be sure that you have a proper internet connection. Once you become aware of this, then you have to unpack the router and its accessories. In the box, you will see a router, a yellow Ethernet cable as well as a power adaptor.
Step 2: Set the Position of your Router
For the best performance of WiFi, you have to set both of the left and the right Antennas 45 degrees away from the center. It will be the position of the router to get a good internet connection.
Step 3: Connect your Router
After performing these steps, you have to turn off your cable modem as well as be sure about that the WiFi router is not connected with a power source. Now, on the back of the WiFi router, you will be able to see a yellow port. You have to take the yellow Ethernet Cable and plug it there. Once done, you have to take the other end of the yellow Ethernet Cable and connect it to the Ethernet port of the cable modem.
Then, you have to connect the Cable Modem as well as the WiFi Router to a power source. After that, turn on both of the devices. After turning on the router, it will be ready when the power LED turns white.
Step 4: Work with Login Credentials
In the router which you are using, there should be a label which contains some pre-assigned login credentials like the (Username and Password). Once done, you have to navigate to your preferred browser. Then, type a web address (google.com, etc.) to check whether you have internet access or not.
After performing all of these tasks, you have to follow the next step mentioned below.
Step 5: Login to the Router
Before connecting to the router, you will see that the installation assistance will start displaying. In this case, you have provided the IP address of your router which is 192.168.1.1 or 192.168.0.1. in order to connect directly with the Admin panel. Here, you have to provide login credentials [Username: admin and Password: password].
Here, the Admin panel will allow you to access all of the routing features, such as port forwarding, optimizing internet speeds for video streaming (Netflix, Youtube, etc.) and video gaming (Xbox, PS4, etc.).You can also block internet access with a keyword filter.
To Conclude…
In this article, our experts have provided a step by step guide using which you will be able to perform this action on your own. Therefore, is recommended to follow each and every step carefully. Also, we suggest you not to jump any one of them. Share your thoughts related to this post with us. If you are facing any glitch while performing these steps, then also you can drop a comment.
