Technicolor TC8717T is one of the best-in-class routers designed and generated by Comcast. Comcast sold the Technicolor TC8717T router as an Xfinity router. It has become so much popular just for providing the high speed of 2.4 GHz bands. Moreover, you can log into this device easily as you would do for the other routers as well. This router is a residential gateway and comes with 2 voice lines and 2 port routers. It can even ensure the cost-saving and conservation of energy. This device operates between the range of 5.0 GHz and 2.5 GHz bands.
You can use this device easily for your residential purposes as well as for your small businesses. It has 4-gigabit ports along with the 802.11n broadcast access point. This device is one of the most popular devices that matches the standard of Arris. So, if you are unaware of how to login to the Technicolor TC8717T router, then this guide can help you a lot. Here, we are going to present some simple steps through which you will be able to log into the router easily.
You need to consider the below points to open the default gateway of the Technicolor TC8717T router:
You can perform the below steps in order to log into the Technicolor TC8717T router:
First of all, turn the computer On and open a web browser. Now, type the default IP address of the router in the address bar of the browser. The default IP address of the Technicolor TC8717T router is 192.168.0.1. You can also type “http://192.168.0.1” in the address bar and hit the Enter key.
After pressing the Enter key, it will navigate you to the login page of the router. Here you will get the option to enter the default password and username of the router. If you are setting up a new device for the first time, then you can use the default password and username for this purpose. You can also check the default login credentials at the box of the F5D7230-4 model.
Most of the time, the default Password and Username are:
Note: The above combination of the password and username is correct in 95% of the Technicolor TC8717T router.
The default password and username can be predicted easily. So, anyone can fiddle with the device easily. It’s always better to change the default password and username to make sure that the router is secure from any third-party login attempts.
You need to consider the below points while changing the password and username of the Technicolor TC8717T router.
There are available several network name or SSID (Service Set Identifier) in the Network tab. Usually, this is the name of the brand who manufactures the device. Hence, in your case, the Service Set Identifier is TC8717T. Hence, you need to change the default SSID of your router. Because, if you don’t change the SSID, it will be easier for third-party users to guess the details of your router.
Check for the encryption settings of the broadcast network by going to the encryption settings. You can even set this to WPA2-PSK that is the current industry standard of the router. It will make sure that the device operates at its top security level.
Users of the Technicolor TC8717T router often complaints that they are facing some problems while using this device. Here in this section, we are about to discuss some common problems of Technicolor TC8717T routers and their solutions that you can.
As we mentioned earlier, “admin” is the default password of Technicolor TC8717T router. In case you see that is is not working, then someone or you might have changed the default passcode previously. To fix this, you can simply reset the device. To do this, you can press the Reset button using a pin or clip and hold it for 28-30 seconds.
If you forgot the password of the Technicolor TC8717T router, then the first thing you have to try hard to find the paper where you have noted it down previously. If you are unable to locate that, then you can contact the Xfinity forums or Internet Service Provider and check the default password of any other router. If nothing helps, then the only way to recover the password is to perform a reset of the device.
The reset process of Technicolor TC8717T router is quite simple and easy to perform. Just press the Reset button and hold it for a minimum of 30 seconds. You can easily do this by following the steps given below: