Type to search

Here’s How To Login Into Cisco DPC3941T Router

How To Login Into Cisco DPC3941T Router

The Cisco model DPC3941T router is one of the best network devices in the market as of now. This router lets you connect with the web, your home network, and small offices with ease. It also comes with a lot of advanced features such as MAC address filtering, IPv6 support and many more.

Basically, it supports wireless band 802.11b/g/n/ac. It has a USB port and 4 port switch. Though it comes with lots of advanced features, you might face several issues while logging in to the router. Therefore, this post will help you log in to the router without facing any difficulties.

Prerequisites in order to access the default login gateway of the Cisco DPC3941T router.

  • Keep the router box near you as it consists of the default username and password.
  • Also, you need a system whether it could a desktop or laptop and an updated version of the web browser should be installed on it.

Steps for Logging in to the Cisco DPC3941T Xfinity Router

When all are set, now, let’s check how to log in Cisco DPC3941T Xfinity Router. Follow these step by step guidelines.

Step 1: Open the Web Browser

In the first, power on the system and then launch the updated version of the web browser. Now, enter the IP address 10.0.0.1 to move to the default gateway or login page.

Note: You need to make sure that your device has a proper internet connection. Also, ensure that you have entered the IP address correctly.

Step 2: Enter the Username and Password on the Default Gateway

After that, enter the default username and password to enter into the router settings section and make necessary changes. You can also enter the below combination of the username and password which works in most of the cases. In case the username and password does not work, then you need to contact Cisco customer care.

  • Default username: Cisco/admin/none
  • Default Password: Cisco/password/none

Step 3: Change the SSID

When you open the network tab, you will find a lot of network names which are known as Service Set Identifier or SSID. You should also change the default names and passwords and make it personal as no one can enter into the Router settings section.

While changing the name of the SSID, you should keep in mind some of the points.

  • Make the SSID name short and simple.
  • Do not create is too fancy as it might backfire.
  • While setting the name of the router, do not use any personal information of yours.

Step 4: Setting up the Cisco DPC3941T Xfinity Router Login Details

After changing the SSID of the router, now, it is time to change the username and password. Due to this, only you can access the router and keep it safe from the unknown attempts.

Tips to change the username and password:

While changing the username and password, you should keep in mind some of the basic points, such as:

  • Create a password consists of alphabets, numeric, and symbols.
  • The password should be at least 8 to 16 characters. Do not make it complex, make it simple and can be easily accessible.
  • When it comes to the username, it can be user-friendly and simple. Write down the username and password in a piece of paper. In case, if you forget the username and password, you can get the username and password from the paper.

Step 5: Secure Cisco DPC3941T Xfinity Router Settings

After logging in to the default gateway, check the encryption setting of the network. After that, set the encryption to WPA2-PSK. Due to this, the router operates at the best security level.

Solutions to the Problem of CIsco DPC3941T Xfinity Router

#1. Cisco DPC3941T Xfinity Password Doesn’t Word:

In most of the cases, the default password is the ‘Password’ word itself. If this is password does not work, then someone might change the default password. In case you are unable to access the password, then you need to reset the password by pressing the Reset button and holding it for a few seconds. You will find the reset button at the backside of the router.

#2. Forgot Password to Cisco DPC3941T Xfinity Router:

Sometimes, you might forget the password that you have saved. In such a situation, first of all, find out the paper where you have written the password. In case you do not find the paper, then it is advisable to contact the ISP or Cisco router forum. They will help you to find out the lost password. If nothing works, then try to reset the router.

#3. How to Reset the Cisco DPC3941T Xfinity Router

In order to reset the router, you need to press the Reset button and hold it for a few seconds. The Reset button located at the backside of the router.