DD-WRT is a Linux-based firmware. This particular firmware enables you to enhance the performance and features of your router. DD-WRT is an open-source upgrade designed to improve the stock firmware. It also allows you to gain an advanced level of control over your router.
Using a DD-WRT is very much rooted aspect in your Android smartphone. DD-WRT functions as a skin over your router. However, to use DD-WRT and take advantage of it, you need to have the default credentials to log in.
Here, we’ll provide you a detailed guide about login into a DD-WRT router. Also, we’ll talk about some of its features and common technical issues.
DD-WRT routers were introduced in 2005. After that, they became quite popular. It was because this open-source program provided total control and protection to the router and its users. Now, to start using this firmware program, you should first perform the crucial login.
In this section, we’ll walk you through the DD-WRT default login process. So, there are two ways to perform the login: the GUI method and the Telnet method. Now, go through the following steps to successfully log in to a DD-WRT router.
If you wish to log in through this method, you need the help of a web browser. Also, you’ll require your router’s default IP address. Hence, follow these simple steps to log into a DD-WRT router through a web interface.
At first, launch the web browser on your device. Now, type the default IP address of your router in the address bar. The default IP address is 192.168.1.1. Thereafter, press the Enter button.
Now, a login page will appear on your screen. On this page, you’ll find two fields. Here, you need to enter the username and password of your router.
Once you feed the above-mentioned username and password, the default gateway will come up on the screen. Here, you can configure the router settings as per your requirements.
Apart from the GUI method, you can also login to your DD-WRT router through the Telnet process. For this, you must have Telnet or SSH commands enabled in your system. So, go through these steps to effectively perform DD-WRT router login via Telnet method:
Begin the process by launching the ‘Command Prompt’ on your device. You can simply type ‘cmd’ in the search bar to launch the Command Prompt.
Now, in the search box, type this command: ‘telnet’. Then press Enter. Thereafter, you will be required to provide the username and password. So, provide the details, where the username is ‘root’ while the password is ‘router’.
Once you provide the login details and press Enter, you can access the default gateway of the DD-WRT router.
Taking into consideration the increased rate of cybercrimes, you must secure your DD-WRT router after logging into it. The best way to secure your router is to make changes in the login details.
This is extremely crucial in case you allowed remote access to your router device. However, you can secure your router in several other ways:
To sum up, the DD-RWT router login is quite a simple process. If you are wondering how to set up or log in to a DD-WRT router, then follow the above-discussed steps. We hope that this information will prove to be helpful to you.
How do I change my Default DD-WRT Router Password?
To change the default DD-WRT password, first, enter your Flashrouter’s DD-WRT settings. Then, click on the ‘Wireless’ tab and select the ‘Wireless Security’ subtab. Now, tap on the ‘Security Mode Dropdown and choose ‘WPA2 Personal’. Change the WPA2/Personal key. Finally, click on ‘Save’ to change the password.
You must know that DD-WRT does not support all models of router. So, you must choose a router that is designed and built recently. To make sure which routers are supported by DD-WRT, you can always go through their database.
DD-WRT is an open-source firmware that helps to enhance your router’s overall performance. A personal router comes with limited functions. But, with the DD-WRT, it entirely transforms the device into a powerful, business-class router. Hence, you can use your router for multiple purposes.