Arris is one of the biggest tech-giants in manufacturing the best-in-class modems and routers. The latest router manufactured by Arris is Touchstone TG1682G. It is a telephony gateway router that offers 4 Ethernet connections facility. It helps the users to use the device at the office or home LAN. With this device, you will get the 802.11a/b/g/n/ac connectivity including two different lines of telephone service.
The Touchstone TG1682G gateway is DOCSIS compliant and can offer high-speed in comparison to the cable modem. This device is also integrated with MoCA 2.0 home networking. Hence, it is a great router for home-usage. In this router, you will also get a USB port for external USB support. But, if you are unaware of how to log into the Arris TG1682G router, then have a quick look at the rest of this guide. Here we are going to provide a step-by-step guide that can help you to log into the Touchstone TG1682G router in minutes.
Prerequisites:
Before going to perform the below steps, there are some essential things that you need while logging into the Arris TG1682G router.
- Check the box of the router and note down the default password and username.
- Get a computer, where you can open a web browser (try to avoid Smartphone devices or Tablets).
System Requirements:
- RAM: 1 GB or greater than 1 GB.
- CPU: 3 GHz, P4 or faster than it.
- Ethernet: 1000 BaseT (7200).
- Hard Drive: 7200 RPM or faster than it.
Easy Ways to Connect the Arris TG1682G Router with the Computer:
You can connect the Arris TG1682G router with the system by using a wire. Or if you prefer, you can also do this wirelessly.
Wired Connection:
To connect the router with your computer, you can use an Ethernet cable that comes with the device. Or if you want to connect more than one router, then you can use the Ethernet hub for this purpose.
Wireless Connection:
Arris TG1682G router comes with the broadcast LAN standard. It allows the device to connect with several computers to use the router using a broadcast signal. To do this, make sure that the system has a broadcast card.
Easy Steps to Log into the Arris TG1682G Router:
To log into the Arris TG1682G router, take a quick glance at the steps mentioned below:
Step 1: Open a Web Browser
In the beginning, turn on the computer and open a web browser. Click on the address bar of the browser and type “http://10.0.0.1.” Hit the Enter key to get the default login gateway of the device.
Note: Confirm that the computer is connected with your home Wi-Fi while performing this step. In addition, you need to be careful while typing the IP address, as a mistype may cause a serious error.
Step 2: Enter the Password and Username on the Default Gateway
To make any changes to the settings of the router, you can use the default password and username. It is an Xfinity product bought by Comcast in our professional market. Hence, the credential details shall be almost the same.
- Default Password: password
- Default Username: admin
Note: In case the above password and username don’t help, you can change the default settings of the router. To do this, you can perform a reset of the device. Simply, press the Reset button by using a pin or paper clip and hold it for at least 14-16 seconds.
Step 3: Change the Network Name
Whenever you go to the Network tab to check the network, you will see several network names on the list. Those names are called Service Set Identifier or SSID. Basically, the SSID is the name of the manufacturer of your router. You need to change it so that it becomes difficult for hackers to guess the SSID of your router.
Important Tips:
- Try to make the SSID simple as well as short.
- You need to set a strong SSID to avoid backfire.
- It’s better to avoid your personal information while setting the SSID of the router.
Step 4: Setting up the Arris TG1682G Login Details
Once you change the SSID, you can change the password and username of the router so that it becomes secure from any unwanted attempts.
Important Tips:
While changing the password and the username of the router, you have to consider the below points:
- Try to set the password with the combination of special, numeric, and alphabet characters.
- The password must need to have 8-16 characters. Make it complex, but easy to keep in mind.
- The Username must need to be simple as well as user-friendly.
- Both the password and username for the Arris TG1682G router need to note down somewhere.
Step 5: Secure the Settings of the Arris TG1682G Router
It is essential to check the encryption settings of your wireless network while logging in to the default gateway of the router. You can set the encryption to WPA2-PSK which is the current industry standard of the device. It will make sure that the device is operating at the top security level.
Some Common Problems of Arris TG1682G Router and Their Solutions
Arris TG1682G router users often face several problems while using the device. Here in this section, we have included some common problems and their solutions.
Arris TG1682G Router Password Doesn’t Work
Usually, the default of the Arris TG1682G router is “password.” In case you see it is not working, then most probably you have changed the password previously. To recover the password of the device, you can reset the device. To perform a reset of your router, press the Reset button on the router using a clip or pin and hold it for 14-16 seconds to complete the resetting procedure.
Forgot Password of the Arris TG1682G Router
First, find out the document where you note down the password of the Arris TG1682G router. If you are unable to locate this, then you can connect with the Xfinity forums or Internet Service Provider and check if you can use the default passcode of another router. If nothing helps, don’t worry. Just reset the router to get rid of this problem.
How to Reset the Arris TG1682G Router to its Default Settings?
You can perform the resetting process of your Arris TG1682G router easily by pressing the Reset button using a pin or paper clip, hold it for a minimum of 14-16 seconds.
