Basically, the static IP address is a fixed IP address which helps you to set up a router or a device. Moreover, internet service providers ask you to provide a static IP address on your system or router’s TCP/IP settings. After setting the IP address you can connect your computer with the internet. Static routing provides you to directly control the traffic on your local network and the purpose of outgoing internet traffic. The Linksys router provides an easy way to manage your company’s internal routes or requests directly through a secure internet connection.
But, many users face various trouble while trying to set up the N600 router static router on their own. Hence, you need an effective guideline in order to Linksys n600 router static IP setup. This article is aimed at providing the exact steps and procedure to set up your Linksys n600 router with a static IP. Therefore, stay with this article and apply the procedure accordingly.
If you have a cable modem, you will get the internet access directly from the modem. But only one person can access the modem. You cannot share it with anyone else. This procedure describes how you can perform a Linksys router setup with a static IP address with ease. Hence, perform the steps to configure the router. Before proceeding further, ensure that you complete the following steps:
III) Finally, you need to reset the router if you are to be using a static IP connection. To perform the action, select and hold the Reset button for a few seconds. After that, you need to disconnect the router from the power outlet for a few seconds. Then connect it again and turn on the router.
To configure Static IP on a Linksys router you need to perform four things.
After checking the internet connection of your system, first, you should connect the modem to the internet port on the router and your system to one of the numbered Ethernet ports.
When your device connects with the Linksys router, you need to verify whether they are working perfectly or not. You can do this by checking the LEDs on the router’s front panel.
To get the IP address, your device should be set to get the IP address. With this IP, it can easily communicate with the router.
To set up a static IP address on your Linksys router, you need to perform a few steps. Hence, take a look at the steps which are mentioned in the section below.
At first, you need to locate the router’s classic web-based setup page. Then, open the web browser. In the address bar, enter the IP address and hit the Enter button.
Then you need to log in your account. Here, you need to provide the login details such as username and password. After entering the details correctly, click the Ok button.
A setup page will open. Select the Static IP for the Internet Connection type from the setup page. After that, put the Internet IP address, Subnet Mask, Default Gateway and DNS which are provided by the Internet Service Provider (ISP).
In the last steps, click the Save Settings option to apply the changes.
We hope this article is helpful to you in order to do Linksys N600 router static IP setup and you got a clear idea about the steps involved in setting up the Linksys router with a static IP. In case you face any problem you can refer to the user manual that comes with the router.