Type to search

Linksys n300 Wi-Fi Router Setup Guide [Step-by-Step]

If you are trying to set up a home network with your brand new Linksys router you would want to make sure that you set it up correctly. And at the same time, you would like to be able to prevent unwanted users and protect the personal information of yours. Here, in this article, we will describe some easy ways that will help you in Linksys n300 WiFi router setup. Go through and perform the given processes to set your Linksys n300 Wi-Fi router without any hiccups.

Effective Process of Linksys n300 Wi-Fi Router Setup

Before going on with the setup process, you have to connect the Ethernet cables i.e., network cables to the Ethernet ports and Internet port on the back of the router.

Accessing the Configuration Menu

Here, in the steps that follow, we are describing how to access the configuration menu at the time of the Linksys n300 Wi-Fi router setup.

Step 1:

First of all, you have to connect your router using a web browser. When you are setting your router up for the first time you should connect it to a computer via Ethernet cable. This act will help you to ensure the fact that you will not be disconnected if changes are made to the wireless network at the time of setting it up. Enter the router’s address into the address bar after opening any web browser.

  • By entering the address 192.168.1.1 you will be able to access your Linksys router.
  • At any case, if you find that you are not getting access to the router from your browser, then the ‘web management’ option may be disabled. In this situation to reset it to factory defaults. Press and hold the Reset button that you will find on the back of your router.

Step 2:

In this step, you have to enter your username and password to continue with the setup process. You will be asked for the username and password for your router when you will try to access the router from the web. In your documentation, you can find the default username and password of your router. If you failed to find one, then generally the username and password of the Linksys n300 router is ‘admin’.

Step 3:

Now in this step, you have to use configuration software to change settings. You can do that without having to connect through a web browser, with the help of the installation CD that came with your router. This will help you to install a configuration program. To use this, you don’t need to enter a username and password. After opening the configuration software, you will see that the menus are not different from the browser menus.

Setting up your Wireless Network

Step 1:

After opening the configuration utility, you will find yourself in the Basic Setup page. There, you can keep the settings in defaults if they are not specified otherwise by your ISP. From there, you will reach the ‘Basic Wireless Settings’ section after clicking the Wireless tab.

With the help of this section, you will be able to create a secure wireless network for you. You have to change it from whatever default it was set to, for security purposes and to prevent any kind of unwanted situation.

Step 2:

In this step, you have to give your network a name. You will find the name of your network in a field labeled as ‘Wireless Network Name (SSID)’ in the list of available networks for the wireless devices that you will find in the Basic Wireless Settings section. As anyone can see the name, you should not give any personal information out there.

  • If the Network Mode and Channel are not specified otherwise by your ISP, you can keep them to default.

Step 3:

After completing the above step, what you need to do is to Enable broadcast. And to do so you have to make sure that for Wireless SSID Broadcast, the Enable option is selected. In this way, you will be able to turn your wireless network on and this will allow your network to be discovered. After finishing the task you have to hit the ‘Save Settings’ button.

Step 4:

Now what you can do is Secure your network. And to do so, follow the steps stated below:

First of all, to open up your wireless security options you have to hit the section named ‘Wireless Security’. Now, from this section, you can set the security encryption type and password as per your need.

Step 5:

Once you are done with the above step you have to hit the option ‘Save Settings’. After that, your router will apply the changes and restart, and then for sure, your wireless network will be activated as well as secured.

Hope that our article helps you to complete doing the Linksys n300 Wi-Fi router setup. You can share your view on the article by placing comments. And for more such articles, stay connected to us.

WordPress › Error

There has been a critical error on this website.

Learn more about troubleshooting WordPress.