Linksys E1200 router setup allows users to utilize the device for connecting different devices to the same high-speed internet connection. The setup procedure is relatively easy, and you need to perform certain steps to successfully set up your Linksys router. Whether you have bought a new router or have reset it, you need to perform these steps to set up your Linksys E1200 router. So, if you are a Linksys router user and want to learn the method of setting it up, then you can follow this guide to learn the same. This article provides the complete steps and procedure to set up your Linksys router, and after following this guide you should be able to set it up without any trouble.
Effective Ways to Configure Linksys E1200 Router Setup
For an error-free operation, you need to setup Linksys E1200 router in a proper way. Here are the easy and quick methods for Linksys E1200 setup without Cisco connect software or CD. Take a look below to learn the method:
1. Linksys E1200 Setup without CD or Cisco Connect Software
Like other wireless routers, you can install Linksys E1200 router easily without CD or Cisco software. Follow the steps one by one:
Step 1: Make Connections
At first, build a connection to the Linksys router. Connect the modem to the internet port of the router via an Ethernet cable. Also, connect the computer to any one of the ethernet ports present on the Linksys router with an Ethernet cable.
Step 2: Open Linksys E1200 Router Setup Page
Now, open the browser and type ‘192.168.1.1’ in the address bar. Generally, ‘192.168.1.1’ is the default IP address of the router. Next, enter the username and password to go to the setup page of the router to change the settings manually. The default password of the router is ‘admin.’ If you are unable to open the router’s setup page using this password, then try to enter other passwords that you might have set earlier.
Sometimes you need to reset the router because the password of the router does not work. To do that, tap and hold the reset button which is at the back of the router, for a few seconds. Then, leave the reset key and switch off the power button. After some times, plug the power button again and wait for 30 seconds.
Step 3: Change Internet Connection Settings
In this step, go to the Main Admin page of your Linksys router. Then, look for the ‘Internet connection settings’ option there. According to the Internet Server Provider, you need to modify the settings.
- In the case of Cable internet, you need to type the same Mac address of the computer.
- In the case of DSL inter-service, you need to modify the connection type to PPPoE. Then, go to the PPPoE settings and save all changes.
After changing these settings, your computer will be able to access the internet with E1200 automatically.
Step 4: Modify the Wireless Network Settings
Now, you need to modify the wireless network settings. So, replace the name of Wireless network SSID with a suitable name that you can easily remember. And, change the security settings to protect the wireless network. Remember one thing that you should use the WiFi connection with a strong password. Otherwise, there’s always a chance of unethical hackers to access your network.
Step 5: Connect Computers to the Network
Lastly, make a connection between computers and the network one by one. Look for the network and type the password for connecting your PC to the network.
2. Linksys E1200 Setup with Cisco Connect Software:
Generally, the Linksys E1200 router comes with various features including the Cisco connect software. This software helps you to perform an initial installation. If you want to set up the Linksys router using Cisco connect software, follow these instructions.
First of all, connect your device with the modem. Be sure that you use an internet connection which is active. After that, you need to attach the modem to the internet port of the router. And, attach the computer to the port 1 that is present on the Linksys router. You can run the Cisco connect application on your computer by connecting wirelessly as well. But we recommended that you should attach your device with an Ethernet connection to avoid error code notifications.
Now, run the Cisco software. It will automatically connect with the internet and set up a WiFi connection. The best thing about this software is that it helps to create a secured WiFi network and a Guest wireless network too. A Guest network means an unsecured connection and everyone can connect to this network. But, without a password, nobody can get access to the internet. So, there’s a password for this Guest network too. After executing this process, you need to check some information such as the settings, network name, and password on the router.
This article provides you a brief idea about the Linksys E1200 router setup. Hope that it will help you to set it up properly. But, if you have any question regarding the process then you can leave your feedback in the comment section.
