After purchasing your new HP Envy 5055 all-in-one printer, you need to set it up accurately. To do that, you need proper guidance regarding the setup procedure, and for that, we can be your best bet. To know the exact process of HP Envy 5055 all-in-one printer setup go through the entire article carefully. With this all-inclusive guide, you will get to know the details of how to set up an HP Envy 5055 all-in-one printer.
Follow the given steps to unbox and start the process of setting up the printer in a proper way.
First of all, you have to remove all the tapes and packing materials from both the inside and outside of the printer carefully to avoid any kind of internal or external damage. And don’t forget to handle the parts of the printer with extra care to protect it from any kind of malfunctioning later on. After that, you have to check if any packing material is still there that can create further problems.
Once you are done with the unboxing process, you have to provide a power supply for your printer. And, to do so, you need to connect one end of the power cord provided with your printer with an external power source. And at the same time plug the other end to the rear side of your printer.
When you are done with the unboxing of your printer, now, you should install the ink cartridge into your HP all-in-one printer to continue with the setup process. You will get these ink cartridges with your HP printer. And now, follow the steps we are describing here to install the ink cartridges in the HP Envy 5055. You need to hold the cartridges with extra care by the side that is covered by a plastic layer of black color. And now, insert the cartridge into the proper slots allotted for them in the cartridge access door of the printer. You need to put the color ink cartridge to the left and the black one to the right.
After installing the ink cartridges, now is the time to load paper into the input tray. And to load the papers, follow the upcoming steps one by one accurately:
First of all, you may use suitable papers for printing. The plain white A4 size papers are the most preferred paper for printing. And then you need to open the input tray and pull out the tray extender to load the papers. Adjust the paper width slider before placing the papers into the input tray.
Here, in this part of the article, we are going to explain the process of HP Envy 5055 Printer wireless setup. With the help of these procedures, you will be able to connect to Wi-Fi enabled devices like your tablets, smartphone, or computers to your printer. For that, you have to download the recommended printer software from the official page of HP. And then to turn Wi-Fi direct on you have to follow the steps one by one accurately:
You can even utilize this method when your printer is connected with the help of USB cable. And for that, you just have to ensure that your device has an active internet connection.
Follow the instructions stated below for the Wi-Fi Direct connection if you have connected your printer to the computer with a USB cable.
Hope, the above method helps you to complete the task of HP Envy 5055 all-in-one printer setup.