HP Envy 4511 Inkjet can handle several tasks in the simplest way to print from a tablet, smartphone as well as the system. So, with Envy 4511 you get wireless printing facility along with lab-quality documents and photos in just a few clicks. But, generally, the users of the HP Envy 4511 Inkjet printer face difficulties while installing the printer for the first time. If you are also facing issues while setting the printer up, or are not sure about the procedure of doing so, then you have arrived at the right page. Here in this article, we are going to discuss the HP Envy 4511 Inkjet all-in-one printer setup procedure. Hence, you are advised to go through the entire article thoroughly to learn the setup process of HP Envy 4511.
After installing the HP Envy 4511 Driver, you can simply print the web pages, emails, documents, as well as photos by utilizing the iPhone devices. Here, you need to use the in-built air print feature to print from the iOS devices. But, before going to the setup procedure you need to perform the steps given below.
After performing the pre-installation steps given above, you need to follow the steps given below.
At first, take your HP Envy printer out from the box and remove the cover of the printer as well as the scanner lid. Then, you have to connect the power cable with the rear edge of your printer. And join the other end of the power cable with the power supply. After that, connect the power cable and turn on your HP Envy printer by holding the power button. You can find this button on the left side of your printer.
After turning on the HP Envy 4511 printer, it may create some sound while initializing the installation process. You can also set the date and time, selected country and language with the help of the downward or upward arrows. Then, the screen of the printer prompts you to install the ink cartridge of the printer. Now, open the access door of the ink cartridge. Then, you have to install the tri-color cartridge at the back cover of the ink cartridge. After that, use the Orange pull tab to eliminate the tape which covers the ink nozzles and electrical contact.
Open the lock arm of the tri-color ink cartridge of the printer. Then, move the tri-color cartridge gently towards its slot as well as assure that the ink cartridge is installed properly in its lock lever. After that, shut the lock lever of the printer. Then, perform a similar process to install the black cartridge. Next, close the access door of the ink cartridge. Then, the printer would detect the installation of a reliable HP ink cartridge automatically.
Now, you will see the confirmation notification on the control panel of the printer. Then, hit on Ok to proceed with the process. After completing the installation procedure of ink cartridges, you need to load printing papers in the paper tray that is specially designed for the various size of papers. Then the printer will start to print the alignment page automatically.
After installing the printing page, you need to place the paper downward the scanner glass as well as under the software and driver scanner or cover lid depending on the directions given in the printing paper.
After you place the printing paper on the scanner of the printer, you need to close the scanner lid. Now the screen of the printer may prompt whether to proceed with the scanning process. Begin the scanning procedure by clicking on the Ok button. Now, the printer will start to scan the alliance page. You will see the ‘Alignment successful’ notification at the control panel of your HP printer. To continue with the procedure you need to press the Ok button. You can insert the printer to a broadcast connection with the help of the software that came included with your HP printer.
To know the wireless HP Envy 4511 Inkjet all-in-one printer setup procedure, you need to follow the section given below.
First, turn on the HP printer, computer as well as the router. Then you need to connect the system to the same network as the HP printer. Now, you have to disconnect the Ethernet cable or the USB cable from the printer. If you already have any pre-installed USB connection software, then you need to establish the broadcast network connection by eliminating the software of USB connection.
Select All programs and then click on HP. Open the printer software. After that, choose the ‘Printer software’ option as well as the ‘Setup’ option to convert the USB connection of the printer to connect a different printer. After that, perform the on-screen directions to finish the printer setup process on a Wi-Fi network.
First, turn on the system, printer, and the router. Then connect the printer to the same broadcast network as the computer. Next, detach the Ethernet wire or USB from the printer. Now, you need to visit the official website of HP and open the Customer Support section to download the Software and Driver. After that, you have to select the option ‘Printer’ and type the model number of your printer.
You also can change the Operating System by choosing the ‘Change’ option. Now, select the ‘Download’ option. You will get more options for the printer by clicking on the ‘Basic driver’ option. Now, to connect the printer with the broadcast network, you need to select the ‘Yes, access my router’ option. Then click on the ‘Next’ button. Now you have to follow the on-screen guidance to finish the software installation process as well as the setup procedure of the Wi-Fi network.
Do not use the USB wire while installing the printer to your Mac. First, turn on the system, router, and the printer. Then, you need to connect the system to the same broadcast network as the printer device. After that, close all the running apps as well as disconnect the Ethernet cable or USB from your printer.
At first, move the cursor to the top of the Menu bar and click on the ‘Go’ option. Then select the option ‘Applications.’ Go to the HP folder. Click on the ‘Device utilities’ option. To launch the HP Setup assistant, you need to click twice on it. After that, follow the on-screen guidance to convert the USB connection to the broadcast network connection.
A system that is running with Mac, Windows 7, 8 Operating System always supports Wi-Fi connection. Those systems also come with a dynamic IP address. A 2.4 GHz network connection with an 11 b/g/n broadcast router is preferred for the Wi-Fi setup. Because the HP Envy printer doesn’t support 5.0 GHz wireless networks.
In the above discussion, we have provided the easy procedure for HP Envy 4511 Inkjet all-in-one printer setup. We hope, if you successfully perform the above steps in their respective order, then it will help you to set up the router in a proper way. After performing the above steps, if you still face any difficulties, then you need to connect with a tech expert. Or, you can leave your feedback and queries in the comment section below.