Firmware is a set of instructions encrypted in a device. Your router is one of the most necessary parts of your home internet setup. Thus, it is important to update router firmware on time. If you are a Dlink user, then you must know the procedures on “how to update Dlink router firmware?” as well. Because if you update the firmware in a regular manner, then it will help you to boost the performance of your device by improving speculative time, instructions, branch prediction, and many more. The upgrade makes the processor more efficient and as well as leads to an enhanced performance.
Are you seeking for the perfect fixes to update the firmware of your Dlink router? Need expert help? You are in the right place. Have a deep look at the section and execute the steps exactly the same as illustrated below. So, go through the whole guide and mitigate the issue on your own.
How To Update Dlink Router Firmware? Here Are The Tricks
Users might face a number of issues while they are going to update the Dlink router and simply ask for “how to update Dlink router firmware?” Keeping that in mind, here we are going to discuss some solutions to update router firmware successfully. So, jump below:
Method 1:
This is the basic method by which you can successfully update your Dlink router firmware as well. So, it is recommended that follow the steps carefully and go through it, as it is a quite lengthy process. The first thing you have to do is to check the router for the address. After that, access your device for showing the IP address in the web browser you are using. But in most of the cases printers have you can obtain the IP addresses back of the printer. But if you are unable to find it, then keep following:
- Open the Start menu and click on it.
- Navigate to the search bar and type “network status” in it. Then, in the new window, choose “View network status and tasks” and open it.
- Now, you have to give a click on the name of the current connection, that is located on the right side of the window.
- You can see an icon indicating the type of connection such as Ethernet, WiFi etc. You have to choose the network connection that you are connected to the router.
- After that, choose Details and click on it. A list will appear on the display.
- Now, locate the “IPv4 Default Gateway entry.” In this section, you can see your IP address as well.
- After that, scroll down to the Router Updates section that is shown below.
- Now, the problem may get resolved and you will successfully update the router firmware.
Method 2:
In case if the first method is not helpful for you then you can go through with this one. The first thing you have to do is to join the router’s wire with your computer to update the firmware. Then, open a browser that is installed in your device. Now, navigate to the address bar and type the following address in the box.
http://192.168.2.1
Now, you will notice a login page is showing up on the screen. Tap on the login icon and move to the next step. You have to enter the correct credentials such as the username and password. In case if you did not change the password before then you have to type “admin” in both the boxes. Now, navigate to the option “Utilities” and click “Firmware Update” option. By this process, you can see the updates that are available for your device. Now, click on it and let your device to complete the update process. It is recommended that do not switch off your router or computer while the process is going on.
Method 3:
As an alternative method, the very first thing you have to do is to open a web browser from your system. You need to be sure that you are connected with a stable network. If you choose Wifi to follow this method then it will be better for you. Moreover, you can use an Ethernet cable for completing the step. Now, in the address bar of the browser type 192.168.2.1 and press the Enter key. Next, enter the password and username as “admin” if you do not change it already. Otherwise, put the changed password. Now, go to the Advanced option and then choose Administration and tap on “Router Update.” Download the Dlink firmware from Basic, Surf, Play, Share, Play Max.If you find an update on the screen then tap on it and
Complete the update process by clicking on the Yes button.
Hopefully, this method will help you to get rid of the error at the earliest possible. But, if you are still facing the issue then, do not try any further tricks at home. It may harm your device. Else you can seek a professional’s help as well. Leave a comment in the feedback box and let us know if you are benefited by us or not.
