Type to search

How To Sync Wii Remote To Console-Ultimate Guide

The Wii is a gaming console developed by Nintendo. If you own a Nintendo Wii and got a new remote to control the console you may face a problem with your controller device. A lack of proper settings knowledge can be responsible for this problem. Here from this article, you will get a complete procedure of how to sync Wii remote to console. So, if you have already learned the process from others (friends or colleagues), then you can go through these below instructions, which will revise your knowledge of how to sync Wii remote.

Steps Of How To Sync Wii Remote To Console

Below are the complete process of learning how to sync Wii remote. By studying these below lines you can be able to perform this task on your own. So let us discover the process of how to sync Wii remote to Wii.

Step 1: Locate The Sync Button

First, turn on the Wii console. To do this, press and hold the power switch of the Wii console. After that, locate the SD card slot of this device, which is present at the front of the Wii console. If you are using a Wii mini console, then you will get the sync button at the left-hand side of the battery section. The sync button is dark red in color in comparison to the console.

Step 2: Get The Battery Section Of Your Wii Remote

Now open the battery protecting cover, which is at the back of the Wii remote. This is a part of how to sync Wii remote to console the process.

A few Wii remote models battery location can be identified by visiting a hole on the gadget. This is because a tiny hole is present on the battery cover of some models of the Wii remote device. The other notifying thing is that you will be able to push the Sync button with the help of the tool on the wrist strap. The models of Wii remote which contain a tiny hole on the battery section, you need not to open the battery cover to access the sync switch.

Step 3: Tap And Release The Wii Remote Sync Button

Further, tap and release the sync switch just beneath the batteries on the Wii remote. On doing this, you will see that the player LED, which is placed in front will get flashing. As soon as you see that the LED is flashing, at that instance, tap and release the dark red button on the Wii console. This dark red colored button is named as the sync button of the Wii remote.

Step 4: Complete The Sync Process

On performing these above steps, the LED light will stop to blink and remain static and it will denote that the syncing is done. This illuminating light denotes the player number and that is “1 through 4”. You need to apply this process with every additional remote to connect with your system.

Troubleshooting Steps

By following these above process, if you fail to sync with a Wii then try these troubleshooting steps as stated below.

  1. Ensure No Programs Are Running

If a game is running on the channel, then this may stop you to proceed while syncing with Wii. So, before learning how to sync Wii remote to console the process, you need to ensure no gaming program is running on the screen. Even if you still face the problem, then it is better to apply the above explaining steps after taking out the game discs from the device.

  1. Confirm The Wii Remote Battery Condition

Insufficient power in the Wii remote battery may cause a disturbance in the syncing process. So, at first swap the batteries in the Wii remote and check if it works. If not, then replace both the batteries with a brand new one to continue the process.

Hope, by studying this article you can be able to sync Wii remote to console without any issue. This is the overall guidance regarding how to sync Wii remote to console.