The error code 0x80300024 usually appears during the Windows installation process. It primarily points towards the hard disk issue of your system. In most of the situations, it happens due to damaged hard disk drive. But, sometimes this error code occurs due to improper software settings which is a very common thing in new systems. Apart from that, this error code also generates due to insufficient memory or space.
That’s why you should always check the hard disk before the Windows installation process. However, solving this issue is quite easy with the proper technical information.
In this article, we have provided the important pieces of information regarding the error code 0x80300024. Let’s have a look at them.
Easy Solution Of the Error Code 0x80300024
The error code 0x80300024 indicates many kinds of installation problems. Therefore, you can apply various types of solutions to it. Here are some prime and solutions that you can apply to this Windows install error.
But before going into the solutions, reboot your system first. This might resolve the issue.
After doing that, you can dive into the solutions section which is present below:
Remove The Extra Drive
If your system contains more than one HDD or SSD, then it might possible that the extra drive of your system is the cause of this error. In some situation, it has been found that if you are trying to install Windows on one of the drives, then other available drives of your system interferes with the installation.
That’s why in order to verify about it, remove the extra drive from your system, then try the installation process once more. If it starts working, then continue the installation process. However, if it shows the error code again, then start trying the solutions mentioned in the next section
Use Another USB Port On Your System
Now, if you are using a USB flash drive for the Windows installation process, then it is quite possible that the cause of this error is the USB port. If the USB port is not compatible with the USB flash drive, then this issue occurs.
Hence, to resolve this glitch, you have to unplug the USB flash drive from that problematic USB port and then connect it with another one. If you are working on the USB 2.0, then change it to USB 3.0 and vice versa.
Change The Drive Order
Another cause of this error might be present in the order of the drive. In some case, the drive that you are using for Windows OS installation is not at the top your system’s boot order. This creates an installation and boot failure which is informed to you as error code 0x80300024.
The boot order is quite an important thing because on startup every system contains an order of sources it tries to boot the OS from. And if it fails to detect that order, then it creates many types of system booting issue.
However, the booting order can be configured with the help of System BIOS:
- To perform it, first, turn on your system
- When it boots up, a black window will appear on the screen where you will get the information on the BIOS entry keys. In most of the case the Delete, F1 or F2 are the default entry keys. However, it might be different on your system.
Press those specific keys and launch the System BIOS page.
- Now on the BIOS setting page, tap on the Boot Tab. In most of the situation, the boot order/configuration of a system is located there.
- After you get that option, adjust the boot order of your desired hard drive and press the F10 key. This will Save all of you changes and close the BIOS setting page.
Once you have done that, reboot your system and try the Windows Installation process again.
Format The Windows Installation Location
The next thing which might be interfering with the Windows installation process is the hard disk partition. If you are trying to install Windows on an old partitioned hard disk, then there is a chance that the data from the primitive OS is interrupting the new installation process. That’s why to solve this error, you have to clear the HDD by formatting it.
- In order to do that, first, you have to insert the bootable Windows installation media into your system and then reboot it.
- When your system wakes up, select on the boot option.
- Now, choose your language, keyboard layout, and other preferences.
- After that, it will ask you about the Windows installation type. Tap on the Custom option.
- Then, it will ask you the installation location, click the Drive options (advanced) option.
- A new window will appear on the screen where you have to select your desired drive option and the hit the Format button. Then, a permission window will emerge, hit the Confirm button there.
Once you do that, the disk formation process will begin. But it will take some time to get complected therefore keep your patience maintained and don’t interpret the process by any medium. After its finished, hit the Next and keep moving the Windows installation process.
Replace The Hard Disk Your System
Now, if none of the solutions works, then it means that the Hard Disk is damaged and you have to replace it as soon as possible. It will help you to solve this error and also upgrade your system’s overall performance.
Precaution To Avoid The Error Code 0x80300024
If you want to eliminate the chances of the “Windows is unable to install to the selected location 0x80300024” error message, then here are some common safety precaution that you can take.
- Save all your personal data on a different location. This will help you in the fresh Hard Disk partition process which is a very good thing to do during the OS installation.
- Check the remaining space of your hard disk before installation.
- Verify about the partition type of your Hard Disk. This is a very important thing because the installation media recognition process depends on it.
We hope the above solutions are able to help you with the error code 0x80300024. For more information on tech-related thing keep following our articles.