Type to search

How To Run CHKDSK On Windows With Simple Steps

The hard disk is quite an essential component of your system. It is where you store all the files and folders. The hard disk is perhaps the most used part of your system. However, it encounters certain technical issues at times. This is where the CHKDSK comes into the picture. The CHKDSK is a system command which simply means to check the disk. The command basically displays the disk space, the volume of the disk and also if there is any error present in the hard disk. The CHKDSK Windows 10 runs an analysis of the performance of your hard disk and then gives a report of the errors. If you are eager to learn how to run CHKDSK on Windows 10, then take a look at this article to perform some instant hacks to get rid of the issue.

How To Run CHKDSK Windows 10?

There are various situations when you require the CHKDSK to run on your computer. If you are looking for how to run CHKDSK in Windows 10, then you should know the reasons to run the system command. Take a look at the reasons to run the CHKDSK command in your system.

  • Your hard disk can be affected by harmful malware. This results in improper behavior of your hard disk. In these situations, it is always better to run the CHKDSK to effectively operate the hard disk.
  • The hard disk driver can be corrupt. You need to update the driver or run CHKDSK if you face such errors.
  • Moreover, if the SATA ports of your system are not working properly then it won’t detect the hard disk everytime you switch on the computer. This is when you need to run the CHKDSK on Windows 10. This will help to know where the problem lies.
  • There can be an issue with the BIOS, where the motherboard of your system will be unable to detect the hard disk. As a result, you will be denied using the hard disk while working on your system. This can be very annoying. Therefore, use the CHKDSK command to see where the problem lies.

Learn How To Run CHKDSK On Windows 10 In An Instant

If you are stuck with your hard disk and want to know how to run CHKDSK Windows 10, then follow this part to get some quick ways to run hard disk on Windows 10. However, first of all, you need to perform some fundamental hacks to rule out the possibilities such as updating the hard disk driver and scanning your computer.

Update The Hard Disk Driver

First of all, you need to go to the Start menu which is present at the extreme left corner of the taskbar. Then type “Device Manager” in the Start search field. You will see the option Device Manager. You need to select that. The Device Manager window will open on your screen. A list of all the drivers installed in your system will appear. There locate the option “Hardware drivers” and right-click on it. Then select the option “Update” from the drop-down menu. Wait for your computer to update the hardware driver. Now, restart your system and see if the issue with the hard disk persists or not.

Scan Your Computer

You need to scan your system using a licensed antivirus to make sure if there is any virus present or not. First of all, download the antivirus from their official website. Then you have to buy the product key of that software. You can avail the product key either from their website or from offline as well. After that, install the software with the valid product key. Then run a full system scan. This will take some time. Wait for the scan to complete. The antivirus will give you a report of the scan. Move the infected files to the Quarantine if it is present in the system hard drive. This will repair the files effectively such that it does not harm your system anyway. Delete the files straight-away that are not in the system drive. This will help your hard disk to run smoothly.

If you find your hard disk is not performing correctly, then you need to run CHKDSK Windows 10, to know about the error which is disrupting your work. Take a look at the ways to run the CHKDSK.

Run CHKDSK Utility From The Computer

Double-click on the “Computer” icon present on your system. You can alternatively open the computer by clicking the Start button and choosing from the Start menu. Then choose the hard drive on which you want to run the CHKDSK. Right-click on that hard drive and go to the “Properties” option from the drop-down menu. The Properties window will appear on the screen. There navigate to the “Tools” tab. Under the “Error checking” part, you have to click the “Check” option to start the Disk error checking. Windows might ask you to check the disk if there is any error detected by the Operating System. Now select the option “Scan drive” to run the CHKDSK. This will take up some time to complete. Wait untill the procedure is complete. Then restart your machine and see if the error is still occuring or not.

Run CHKDSK Utility From The Command Prompt

Right-click on the Start button present at the left side of the taskbar. Now choose the option “Command Prompt (Admin)” from the WinX menu. The Command Prompt window will open on the desktop. In some circumstances, Windows might ask your confirmation by poping with a User Access Control dialog box. Hit the Yes button to confirm. In the CHKDSK type the command “chkdsk X” where X is the drive where you want to perform the disk checking. Then press the Enter button. After that, you have to specify the action you want to perform while disk checking. The command /f will tell the CHKDSK to fix the error present in that specific disk. The /r command means that the CHKDSK will find the bugs present in the drive and recover the readable information from them. The command /x will tell CHKDSK to dismount the selected drive forcefully before scanning it. Now give the appropriate command and wait for the CHKDSK to do the rest of the job. At last, restart your system. Now, check again whether the problems are solved.