Know How to Reset BIOS Admin Password: Get Simple and Effective Solutions

A BIOS password is authentication information, thus it is required every time when you want to log in to your laptop. If you forget your BIOS password, you will be restricted to log into your computer’s basic input/output system. Therefore, you need to reset the BIOS admin password as early as possible so that it won’t hamper your work. Essentially, you need this information prior to the boot up of your machine.

The ROM BIOS or BIOS is a very important and integral part of a computer operating system. The user set a BIOS password in their computer in order to prevent its access from any unauthorized users. This tool also helps in protecting your business confidential data and maintaining its privacy. But if you don’t remember that password, it might be an issue because then you will be also unable to log in to your computer and fail to access the data and information in it. If you are a Dell laptop user and don’t remember the BIOS admin password, then you have to reset the BIOS admin password on Dell laptop.

Check Out Below Solutions to Know How You Can Reset BIOS Admin Password On Dell Laptop:

The BIOS admin password is very sensitive information as it is responsible for restricting the unauthorized users from accessing it. It also protects your computer from any unauthorized access by the outsiders or hackers. Thus, it ensures the security of your operating system by keeping safe its stored data and information. But, in case, you forget the password, you have to reset the BIOS admin password. There is some easy way to reset the Bios Admin Password. For that, you just need to follow the below steps.

Master Password Can be Used

For using the master password, at first, you need to lock your system, and to do that you need to type the wrong password three times. Your computer gets locked and you will get to see a system disabled message on your screen. But you don’t need to worry about that. When you reboot your operating system it will go back to the previous status and all your data will be safe. You have to do this to find if there backdoor password.

• When you find System Disable option on your computer screen, you need to make a note for the system disable number which you will require later.
• You can visit the password generator website using another computer’s web browser. This website will help you to create backdoor passwords and that is based on the code which you received.
• Now, you need to put the code which you have noted down and then click on the Get Password option. Then, the website tries to create a password which can unlock your system. You will get several passwords which you can implement.
• The system needs to reboot your locked computer and then try these password one-by-one. You will get three attempts after that the computer will be locked. If this happens, you need to restart your computer once again. There will be a one stock BIOS password on the BIOS master password. This will unlock your system.
• If it unlocks your system, you should change the BIOS setting. Once you put the correct password, ensure that the BIOS setting is correct so that you won’t face this difficulty in the future.

Remove the CMOS Battery

In case, you fail to unlock your system through the master reset, then you can try this CMOS battery remove method to reset BIOS admin password on Dell laptop. The CMOS battery looks very similar to a watch battery and it provides power when your computer is unplugged. Your password get save through the motherboard. You should remove the battery and this will clear all the settings.

• For that, first of all, you should disconnect all the things from the desktop tower. You need to detached all the cables which are connected to the back side of your computer system. If you are using the laptop, then also you should follow this method. In that case, you need to remove the laptop battery as well.
• Once you unplug the computer, you need to press the power button. This will clear all the changes in the motherboard.
• You need to remove the screw in order to access the inside of the case.
• You should discharge any built-up static electricity before you touch anything. This will avoid any sort of damages.
• After that, you need to locate the CMOS battery, which is located at the edge of the motherboard.
• The battery might have some protection like it may be held by one or two small chips. You need to take out the battery carefully from the socket.
• After removing the battery, you should take a little pause around 35 seconds so that the BIOS settings are completely get cleared.
• After that, you need to reinsert the CMOS battery the way it was. And then, close the case.
• You need to reconnect the cable and power on the computer. At the same time, you need to enter the BIOS. You can do it by pressing the BIOS setup key when your system boots up. After you have already reset the BIOS, now you need to reset your system clock again or any previous setting that you made in BIOS.

Jumpers Need to be Reset

Another method that you can apply to get rid of this error is by resetting the jumpers. For that, you need to disconnect all the things from the desktop tower. Additionally, you need to detach all the cables which are connected to the back side of your computer system. If you are using a laptop, then also you can follow this method. In that case, you need to remove the laptop battery as well.

• Once you unplug the computer, you need to press the power button. This will clear all the changes in the motherboard.
• Then, you need to remove the screw in order to access the inside of the case.
• You should discharge any built-up static electricity before you touch anything. This is to avoid any sort of damages.
• Now, you need to locate the BIOS reset jumper. The BIOS Jumper is like two-pins and is situated around the silver CMOS battery.
• The jumper will be labeled as CLEAR CMOS, CLEAR, CLR, PASSWORD, PSWD, JCMOS1 etc. But, in case, you don’t have reset jumper you can get in touch with the manufacturer.

In most of the cases, two BIOS jumpers are installed of three available pins. So, you should move the jumper and reset the password. Now, wait for some time, as this will clears the password and all the changes made. Next, you need to bring back the jumpers to its original place and close the case completely. Thereafter, you need to reconnect the cable and power on the computer and at the same time, enter the BIOS. After that, you need to press the BIOS setup key when your system boots up. As you have already reset the BIOS, you need to reset your system clock again. Also, you need to reset any previous settings being made in BIOS.

Use MS-DOS Command

You can use the command prompt in order to reset BIOS admin password on Dell laptop. To do so with the help of command prompt, you need to follow the below steps.

• At first, click on the start option. At the bottom, you will get to see empty panel to write. Type command prompt in the search box.
• Now, you need to open the Command Prompt from Programs menu.
• Once you click on it, you will get to see a black window which comes up on your screen.
• There, you need to type the following commands:

debug
o 70 2E
o 71 FF
quit
Once you are done with it,  you need to restart your computer. This will reset the CMOS settings along with the BIOS password.

Hope that by following these steps, you will get an idea of how to reset the BIOS admin password. In case, you face any trouble to open the back case of your system, you can avoid these steps. Moreover, you can also contact the support team for further help. But if you need any clarification or have any doubt in your mind, you can take help from an expert to reset the password.