Type to search

How To Login Into Buffalo WHR-G300N Router [Complete Guide]

In order to access the web on your device and other devices no matter if you are using it in your home or for office purposes, the AirStation launches The AirStation WHR-G300N  router. With the help of this router, you can easily stream multimedia content. You can also use this router in order to play high-end graphics games. Moreover, it provides up to 300 Mbps speed at a time

It comes with the AirStation One-Touch Secure System by Buffalo to provide the best wired and wireless security. Its coverage is the standard 802.11g. The Buffalo WHR-G300N router comes with the 4 ethernet ports and also has auto-sensing switched. Due to this, you can control the whole thing properly. But users get often a problem while logging on this router. To help you out, we are going to discuss the step-by-step procedures in order to log in to this router without facing any difficulties.

Tips to Access the Default login Gateway of Buffalo WHR-G300N:

  • In order to log in to the router, the first thing that you should need is a system. The system should have a proper internet connection.
  • Also, install the updated version of the web browser on the system.

After acquiring all the necessary things, now, follow the steps mentioned in the section below in order to login to the Buffalo WHR-G300N Router.

Follow Simple Steps To Login Buffalo WHR-G300N Router:

If you have a router and is encountering several problems while logging in to it, then go through the steps mentioned in the section below and apply them accordingly.

Step 1: Launch the Web Browser

In the first steps, enter the IP address of the router in the address bar and hit the Enter button. Most of the time the default IP address for the Buffalo router is 192.168.11.1. Simply, copy the IP address from here and paste it on the address bar of the web browser.

Step 2: Enter the Default Username and Password

If you successfully enter the IP address of the router, then you will directly move to the login screen of the router. Here, you need to enter the username and password in the respective fields.

So, if you are a new user, then you need to enter the default username and password. You will find the default username and password in the router box itself.

The default username is “root” and the default password is blank.

Note: According to the users, this default username and password work 55 5of the cases.

Step 3: Set up the Buffalo login Credentials

You can easily get the default username and password. Hence, one can easily predict the default username and password. Therefore, it is recommended to change the default username and password. Due to this, you can secure the router as well.

While changing the username and password, you need to follow some tips. The tips are:

  • Make sure that you have created the password with the combination of alphabets, numbers and special characters.
  • Do not make the password too long, then it will be difficult to remember. You should also create a password between 8-16 characters.
  • You need to make sure that you have to choose the username short and user-friendly. Please write down the password and username on a piece of paper. In case you forgot the username and password, you can recover them from there.

Step 4: Change the SSID for Buffalo Router

When there were different WiFi names found inside the network section known as SSID. The SSID name is the manufacturer’s company of the router by default. The SSID name looks like Buffalo-G-XXXX or Buffalo-A-XXXX. For security purposes, you need to change the SSID name and choose the name short and simple.

Also, you need to make sure that the SSID should not be very fancy. It is also recommended that do not use any personal information while creating the SSID name.

Step 5: Secure WHR-G300N Router Settings

Now, check the encryption setting under the default gateway of the network. After that, set the encryption to WPA2-PSK which is more secure.

Troubleshooting Methods to Resolve the Problem with Buffalo WHR-G300N Router:

#1: Buffalo WHR-G300N password Doesn’t Work

In case, the default password which is the word ‘admin’ itself doesn’t work properly, then it is sure that someone has changed the password. So, if you do not know the password, then you need to reset the password by simply pressing the Reset button. You can even get the Reset button from the backside of the router.

#2. Forgot Password to WHR-G300N Router

In case you forgot the password that you have changed, then at first, you should find out the paper where you have written the password and username. So, if you do not find out the paper, then you should contact the ISP or the manufacturer of the router. In nothing works, then you need to reset the router again.

#3. How to reset the Buffalo Router to Default Settings

If you are not aware of how to reset the router, follow the steps mentioned in the section below.

  • Turn off the router and then turn it on again. After that, take a pin or something like that and press the Reset button present in the backside of the router.
  • Press the Reset button and hold it for a few seconds. After releasing the Reset button, turn off the router. Wait for a few seconds and now, you have successfully reset the router.
WordPress › Error

There has been a critical error on this website.

Learn more about troubleshooting WordPress.