Type to search

How To Change WiFi Channel In Easy Steps: Best Ways

WiFi or Wireless Fidelity is a wireless technology that uses WLAN (Wireless Local Area Network) to connect to various devices that are based on IEEE 802.11 standard. WiFi Alliance trademarks this technology. Different devices use WiFi technology to connect to the internet wirelessly. Some of those devices are laptops, desktops, smartphones etc.

There are two bands of WiFi in the market- a 2.4 GHz and another one 5 GHz. A 2.4 GHz band WiFi signal has 11 or more number of channels. A 5GHz band WiFi signal has a large number of channels than the 2.4GHz band. Because of the problem with the frequency that overlaps a 5GHz device do not allow all the channels that is available. Instead of that, a certain number channels are used. Although as we can see that these two WiFi channels have their own merits and demerits, even then it is quite necessary for you to know how to change WiFi channel.

Why You Need To Change WiFi Channel?

This section will provide you with the reason why do you need to change the WiFi channel after all. Since majority of the people use routers that operate on channel number 6 of 2.4 GHz band signal. Now, if another house in the vicinity operates on the same channel and band signal then that will create interference which in turn will cause immense performance slowdowns. Also, some old WiFi equipments cannot able to do automatic switching between both channels. Then sometimes due to the interference and severe slowdowns you cannot able to use the internet only.

Steps On How To Change WiFi Channel

In this section of the article, you will get various steps that will help you to get the perfect answer for the process to change WiFi channel.

Open The Router Configuration Page Via Web Browser

  • Launch the web browser. Next, type the IP address of your router.
  • This is a number that you can see at the back of your router or it can be printed on the user manual of the device.

Open The Router Configuration Page Via Command Prompt

  • At first, tap on the ‘Start’ menu, then in the search type Command Prompt. From the output of the search choose ‘Command Prompt’ option.
  • After that, within the ‘Command Prompt’ window type the following command – ipconfig and tap ‘Enter’ key to execute it.
  • This command will provide you with different addresses among which you will have to choose the address of ‘Default Gateway’.
  • This address is the router’s IP address and it is pretty much same as ‘’. For some router, it can be a little different.
  • Now, type the default gateway address on the address bar of your web browser to open the router admin page.
  • Next, you will get a prompt to enter the login credentials to get into the router admin page. In order to find the default username and password, go to the first point and follow those steps.
  • Now, when you get the access to the router admin page, then go to the WiFi settings option. Within that option, you can choose either 2.4 GHz or 5 GHz channel. If the router device works with both channels then you can separately select a channel that works fine.
  • For each and every manufacturer, the WiFi settings option is in a different place. Be sure to save any settings of the router. After it is done, simply reboot the router.

If you cannot able to change wifi channel of the router on your own, then you can seek help from other online websites. Hope the solutions mentioned above will be sufficient to respond to your queries. If not, you can post your comment or share your feedback anytime.