Nowadays we are familiar with Windows 10 since all of us are using computers and smartphones in our day to day life. Windows 10 is the latest version of the Windows available. And while using we often encounter with the issue of Windows 10 Update got Stuck.
Most of the Windows 10 updates are sent automatically. Sometimes installation gets stuck when the patch or service pack is installed during the shutdown or startup time. Therefore, it’s a common issue and it’s high time to fix the problem.
You will find the Windows 10 Update got stuck for a number of reasons. Some of them are discussed below.
If you are unable to view anything on the screen mostly when you believe that the update is done please check how to fix the problems caused during the Windows update.
There are also reasons for the Windows getting hanged. Most of it is caused by software conflict which cannot be taken into account until the update is complete. It is also caused by a mistake in the Microsoft’s side.
Windows 10 updates usually take a lot of time. So, first make sure the update is really stuck. Wait for 2-3 hours to finish the installation. But if it is taking more time than that, then take a look at the hard drive activity. You will see no activity or a light is flashing. But chances are very little that the updates can freeze for more than 3 hours. If that is the case, then try out the fixes described below.
When you encounter such a situation, just press Ctrl + Alt + Del command, and then you can automatically visit the Windows Login Screen. If it happens normally, log in and ensure the installation of the updates to resolve the issue.
You can do so by clicking either the reset button or turn it off and then again start using the power button. Start the Windows and complete the installation process.
Note: If you are using laptop or tablets, then it is advisable to remove the battery.
Load the minimal number of drivers and services that Windows requires. Because if another program crashes with the Windows Updates, the installation process will be interrupted. Install the updates successfully and if you are in safe mode, restart the PC.
Follow the complete restoration process to revert the changes done by the incomplete installation of Updates.
If there is a restore point then use it. In case the restoration of the system is successful, then the computer should get back to its previous state before the starting of updates. If this problem happens after an automatic update, like the case of the Patch Tuesday (release of security patches for software updation), change Windows update settings to avoid the recurrence of this problem.
If the Safe Mode is not accessible or in case of restoration failure, go ahead with system restoration from the Advanced Startup options.
Although system repair is a direct method to fix the issue, there is also a comprehensive approach to repair the issue. Go for a startup repair for Windows 10. If that doesn’t work, reset the PC. In this way, you can resolve the Windows 10 Update Got Stuck issue.
An obsolete version of BIOS although does not post any threat but sometimes it becomes a great matter of concern. If some of the updates Windows trying to install is concerned with the motherboard or other inbuild hardware, a BIOS update can eliminate that issue.
A clean installation is mainly concerned with the removal of the hard drive and the installation of Windows once again from the beginning. If you are able to fix the issues following the previous steps then you don’t need to hang on with this and therefore Windows 10 update will not get stuck.
You might think that reinstalling Windows updates can cause the same problem but it’s actually not the case. Since the lockup issues are basically software conflicts a clean Windows installation is preferable. But along with the available updates can optimize the performance of your computer.
This article covers almost all the major areas pertaining to the Windows 10 Update Stuck issues. However, if you find any more steps let us know by dropping a comment.