Get All The Errors Solved with ErrorCode0x

Call Us Now :

Windows Error

Resolve We Couldn’t Complete the Updates Undoing Changes Error Using Easy Fixes

We couldn’t complete the updates undoing changes, is one of the most common error which you can encounter if you have not downloaded Windows update properly. You can also encounter this error if your system files are corrupted. In case, if you have already faced this error and want to resolve it, then, you are in the perfect place. This article consists of a comprehensive guide which will help you out. But before going to the solutions section, at first, let’s know what causes this particular error and the symptoms for this error. After that, you will be walked through the part of the solution.  

Causes for Windows 10 Couldn’t Complete The Updates Error

When this particular error takes place while updating your Windows device and your system freezes suddenly. Due to more than one reasons, you can encounter this particular error with your device. For instance-

  1. In case, if you have not downloaded the update properly, as a result of which, you can encounter this error with your device.
  2. Due to insufficient disk space, you can also encounter this particular error with your device.
  3. If you have interrupted the update process during the installation, you can also come across this error with your device.
  4. In some cases, due to some corrupted system files of your computer you can also encounter this particular error with your device,

 

Well, once you become aware of the causes, now, let’s focus on the solutions to resolve this matter without any hassle.

Easy Fixes to Resolve We Couldn’t Complete the Updates Undoing Changes Error

Here are some instant hacks which will help you out. Try to follow whichever looks convenient for you.

Method 1: Boot Into Safe Mode

When you encounter this typical error with your device then, at first, you have to boot into the safe mode. In that case, try to follow these steps mentined below.

  1. At first, you have to go to the Troubleshoot section.
  2. Once done, you have to locate the Advanced options.
  3. From this section, you have to find the Startup settings.
  4. In these settings, you have to press 4  in order to start the safe mode.

After boot into the safe mode, you will be able to troubleshoot this error hopefully. In case, if you won’t be able to resolve this matter then, try to follow the next method mentioned below.

Method 2: Run Update Troubleshooter

You can also Run the Windows troubleshooter, using these steps mentioned below. This troubleshooter will search for any update related issue that takes place in your system and will resolve it with ease.

  1. At first, you have to tap on Windows Key as well as the I key to launch the Settings option.
  2. Now, navigate to the Update and security section.
  3. Once done, you have to go to the Troubleshooter panel.
  4. Now, you have to choose the Windows update as well as you have to tap on ‘Run the troubleshooter’.

After running this troubleshooter, you will be able to resolve this issue without any hassle. In case, if you won’t be able to resolve this matter, then try to follow the next one.

Method 3: Eliminate Software Distribution Folder

Software Distribution folder helps you to store all Windows update files. In some cases, if you noticed that, this folder is corrupted or damaged, then you have to delete it. In this case, try to follow the steps mentioned below.

  1. After disabling this folder, you have to disable some Windows update services.
  2. Now, tap on the Windows Key and the R button at the same time to launch the Run dialogue box.
  3. Here, you have to type Command and hit Enter to continue.
  4. You will be able to navigate to the command prompt.
  5. Here, you have to type these commands one by one.

net stop wuauserv

net stop bits

net stop cryptSvc

net stop msiserver

 

  1. After that, you have to open the Windows Explorer as well as open the following address: C:\Windows\SoftwareDistribution
  2. Now, you have to delete all files and folders.
  3. Once done, you have to enable the services again using the following command mentioned below:

net start wuauserv

net start bits

net start cryptSvc

net start msiserver

Now, you have to restart your device. In this way, you will be able to troubleshoot this error without any hassle. In case, if this error won’t be resolved then, go through the next method.

Method 4: Enable App Readiness Service

App readiness is a service which is required when you perform a Windows update. In this case, some users have reported that, if you turn on the App Readiness service, then it will resolve this issue. In this case, try to use these steps :

  1. At first, you have to tap on the Windows key and the R key at the same time to launch the Run dialogue box.
  2. Once done, you have to type ‘services.msc’ as well as hit Enter to continue.
  3. Now, you have to search for the App Readiness Service and place double click on it in order to open the properties.
  4. Once done, you have to set the startup type to Automatic.
  5. Again, you have to tap on the Start to run the service.
  6. After that, you have to tap on the Apply option and then tap on the Ok button.
  7. Now, you have to restart your system.

After performing all of these steps, this particular error can be fixed. In case, if you won’t be able to resolve it, then, try to follow the next method.

Method 5: Turn Off Automatic Windows Update

You can also Turn off these automatic Windows updates to fix this issue, in this case, try to follow the next method mentioned below.

  1. At first, you have to open the services Windows.
  2. After that, you have to locate the Windows Update service as well as place a double click in it.
  3. Once done, you have to choose the start type to the disabled. Now, tap on the Stop in order to stop the running service.
  4. Once done, you have to tap on the Apply as well as you have to tap on Ok to continue.
  5. Now, you have to restart our system and check the status of the error. If it persists, then try to follow the next method mentioned below.

Method 6: Perform System Restore

You can also perform a system restore in order t resolve this matter. In that case, try out these steps:

  1. At first in the Troubleshoot screen, you have to select the Advanced options.
  2. Once done, you have to choose the ‘System Restore’ section.
  3. Now, you have to follow the on-screen instructions to resolve this matter.

After performing all of these steps, you will be able to troubleshoot this error without any hassle.

To Conclude

Here is a step by step guide using which, you will be able to resolve this matter without any hassle. On that note, try to follow each and every step carefully. Try not to jump any one of them. If you have any further queries related to the steps provided, then, you can leave a comment in the comment section. On that note, we are concluding this post and see you in the next one.

+1-888-220-3424 Request Call Back