Type to search

Effective Methods To Fix Video Scheduler Internal Error

Sometimes when we replace some hardware on the computer, we face some internal issues related to the video scheduler.  While changing some hardware and software on the computer sometimes a problem arises on the video drivers of the system which results in this situation. Also, if you are using a backdated or faulty Graphics card driver on your computer then you might face this issue. Moreover, due to the corrupt registry files of the Windows, we might face this issue. A hardware failure might be the possible cause of this error. Thus, we are going to discuss the methods to fix the video scheduler internal error.

Causes Of The Video Scheduler Internal Error

There are several causes of the video scheduler internal error:

  1. Due to the hardware issue, you might face this error in your system.
  2. If your computer has been infected with malware or viruses then you might face these issues.
  3. Also, if the Windows system files get corrupted somehow then you may receive the video scheduler internal error on the computer.
  4. Due to the corruption of the windows registry, this error may crop up.
  5. Also if you are using a corrupted, backdated or faulty driver on the computer then you might face this issue.

Procedure To Fix Video Scheduler Internal Error

The procedure to fix video scheduler internal error are listed below:

  1. Checking the possible system file and hard drive corruption.
  2. Updating the Windows.
  3. Reinstalling the faulty drivers.
  4. Running the system file checker.
  5. Next, run the check disk command.
  6. Running the disk cleanup.
  7. Updating the Graphics card driver.
  8. Running the DSIM command.

Checking The Possible System File And Hard Drive Corruption

To check the possible system file and the hard drive corruption go through the steps:

  1. Press the ‘Windows’ logo key from the keyboard.
  2. Then on the search panel type the command ‘cmd’.
  3. Then right click on the ‘Command Prompt’ and then select the option ‘Run As Administrator’.
  4. After that select, the option ‘Yes’ on the dialog box.
  5. Then type the command ‘chkdsk /f /r’  and press the ‘enter’ key from the keyboard.
  6. After that press the key ‘Y’ from the keyboard.
  7. Now reboot the computer.
  8. After rebooting the computer press the ‘Windows’ logo key and then on the search panel type the command ‘cmd’ and then choose the option ‘Run As Administrator’.
  9. Then type the command  ‘sfc/scannow’ and press the ‘Enter’ key from the keyboard.
  10. Now the system checker program will run.
  11. Then check if the issue is resolved.

Updating The Windows

By updating the Windows on the computer you can resolve the issue. Thus, go through the steps to fix the problem:

  1. Press the ‘Windows’ logo key and the letter ‘I’ together from the keyboard to open the ‘Settings’ on the computer.
  2. Then select the option ‘Update & Security’.
  3. Now choose the option ‘Check For Updates’ to check for the available updates.
  4. Then download and install the updates.
  5. After that check, if the problem is fixed.

Reinstalling The Faulty Drivers

To reinstall the faulty drivers on the computer go through the steps:

  1. At first, press the ‘Windows’ logo key and the letter ‘X’ together from the keyboard.
  2. Then from the list of options select the option ‘Device Manager’.
  3. Next, select the option ‘Scan for hardware changes’ to scan for all the changes made on the hardware devices.
  4. Then check for any uncommon sign beside any of the drivers of the device.
  5. Now select the option ‘Uninstall’ to delete it.
  6. Then choose the option ‘OK’ to confirm.
  7. After that download the driver online and then install it.

Running The System File Checker

Follow the steps to run the system file checker and the disk command on your computer:

  1. Press the ‘Windows’ logo key and the letter ‘X’ from the keyboard.
  2. Then select the option ‘Command Prompt(Admin)’.
  3. Next, in the ‘Command Prompt’ type the command ‘sfc/ scannow’ and press the ‘Enter’ from the keyboard.
  4. Then the computer will start checking for the system files.

Running The Check Disk Command

To run the check disk command on your Windows command follow the guidelines:

  1. Press the ‘Windows’ logo key and the letter ‘X’  to open the ‘Command Prompt’.
  2. Then select the option ‘Command Prompt(Admin)’.
  3. Now select the option ‘Command Prompt(Admin)’.
  4. Next, in the ‘Command Prompt’ type the command ’chkdsk’ to check the disk.
  5. Now it will start checking for the disk files.

Running The Disk Cleanup

To run the disk cleanup on the computer go through the steps:

  1. Open the ‘My Computer’ or ‘This PC’ on your computer.
  2. Then right click on the ‘Local Disk C’.
  3. Now from the list of options select the option ‘Properties’.
  4. Then select the option ‘disk cleanup’ on the ‘Properties’ window.
  5. Now the disk cleanup process will start.
  6. Then on the disk cleanup window check the boxes and choose the option ‘Clean Up system files’.
  7. Now choose ‘OK’ to finish.

Updating The Graphics Card Driver

  1. Press the ‘Windows’ logo key and the letter ‘R’ together from the keyboard to open the ‘Run’ box.
  2. After that type the command ‘devmgmt.msc’ and select ‘OK’ in the ‘run’ box.
  3. Then select the ‘Display Adapters’ and then right click on the ‘Nvidia Graphic Card’.
  4. Now choose the option ‘Enable’.
  5. Then right-click on your graphics and then select ‘Update Driver Software’.
  6. After updating the driver install the updates of the driver.
  7. Then reboot the computer and check if the issue is resolved.

Running The DSIM Command

To run the DSIM command go through the steps:

  1. Press the ‘Windows’ logo key and the letter ‘X’ from the keyboard.
  2. Then select the option ‘Command Prompt(Admin)’.
  3. Next, in the ‘Command Prompt’ type the command

‘Dism /Online /Cleanup-Image /StartComponentCleanup Dism /Online /Cleanup-Image /RestoreHealth’ and press the ‘Enter’ key from the keyboard.

  1. If the issue is not resolved then type this command ‘Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows

Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess’ and press the ‘Enter’ key from the keyboard.
Therefore by following the steps mentioned above, you can resolve the issue.
We believe that this will help you to resolve all your doubts and queries. For any other issue related to your device, you can post your queries and comments.

WordPress › Error

There has been a critical error on this website.

Learn more about troubleshooting WordPress.