ERROR CODE 0X

Is Nintendo Switch Dock Not Working? Get The Effective Solutions To Overcome This Issue

Nintendo Switch is a gaming system which can be used as both a stationary as well as a portable device. It can be connected to a television using an HDMI cable. However, the common issue that is faced by many users is Nintendo Switch Dock not working issue.

The main possible causes which result in such an error are cables are in the incorrect order, HDMI issues, Power outlet problems, and bad configurations. To know the complete solutions regarding this error, continue with the below lines of this article.

How to Resolve Nintendo Switch Dock Not Working issue?

These are some basic solutions that you can try to solve the Nintendo Switch Dock not working glitch, and they are as follows:

Solution 1: Power Cycle the Entire Setup

The foremost task that you need to perform after you get this issue is Power Cycle the Entire Setup. The full steps that you need to perform this method are as follows:

First of all, save your all pending data, and then open the HDMI cable from Switch Dock. After that, unplug the Power cable from the device. Next, press down the Power button of the device for around 12 to 15 seconds. Now, wait until the process responds gets completed.

During the above-said process response time, it is better to run a Power cycle of your Television and the Nintendo Switch.

After completing the above-said tasks, you need to plug in back every cable (HDMI cable and the Power cable) to their real ports. Next, turn on the Power supply for both the devices. Also, do not forget to connect Nintendo Switch to Dock. Further, check if the issue gets resolved or not.

Solution 2: Follow the Correct Order to Plugin Cables

Connecting the cables of the Nintendo Switch device in a correct manner is another effective way to solve this technical glitch. Here, in this section, you will get to learn the appropriate order of plugin the cables. Try out this method, though it may seem like imperfect to you.

To begin with, at first, plug out every cable (HDMI cable, Power cable and Switch peripheral itself) from Switch Dock. Next, wait until the device comes in the room temperature. 

Further, plug in the Power cable first into the Switch Dock. Now, check the device whether the Power LED is showing active or not. If not, then it means that there is a problem with the Power cable or the Power Outlet. If the Power LED is lit, then proceed with the further step.

Now, take the HDMI cable and then connect it with your Television (Here, we assumed that the HDMI cable is already connected with your television).

Further, insert the Nintendo Switch into the Dock and check the LED for HDMI, if it lits green, then hopefully, you will get the issue resolved.

Solution 3: Check the Power and the HDMI Cable

If the Power cable that you are using does not support your device and it the PSU is not strong, then this will result in such an issue. It is advised to use the genuine Power cable. Also, connect the Power cable to the direct Power Outlet, not in a medium.

After ensuring that the Power cable is not the issue, in the next stage, you need to check the HDMI cable. If the HDMI cable is not OK, then this can be the case why you are getting the error. To verify if HDMI cable is the culprit, you need to try to connect the HDMI cable to another computer.

If both the Power and the HDMI cables are OK, then you need to forward to check for the Dock device.

Solution 4: Checking for a Faulty Dock

If all the above solutions fail you to get the desired result, then further go for checking for a faulty Dock method. The complete steps to perform it are as follows:

To check whether a faulty dock issue or not, you need to borrow a Dock from a friend and then try plugging the Switch and TV in it. If you get the error solved, then you need to alter the faulty dock, because there is no other option is left for you.

All these are the complete solutions for resolving Nintendo Switch Dock not working issue. Try all until you get it resolved.

Steps to Solve Nintendo Switch Dock USB Ports Not Working Issue:

To solve the USB ports not working issue of the Nintendo Switch Dock, you have to perform a System Update. The steps to perform this task are listed below:

  1. From the Home Menu window, go to the “System Settings” option.
  2. After that, scroll down the System Settings window, until you get the System option in the left-hand side panel. Click on it to continue.
  3. Next, from the right-hand side of the window, click on “System Update”. If an update is available for your system, then this will automatically get downloaded and installed. 

Once your system gets updated, restart both the devices and then check if the problem gets resolved or not. Most probably, the answer to this question will be positive.

All these are complete information regarding the Nintendo Switch Dock not working issue. Try all the solutions at first. And if still, the problem does not go away, take the help of an expert to resolve it.

Call Now ButtonCall us Now