Get To Know How To Eliminate Microsoft Office Error Code 30016-4: Four Brilliant Ways

The Microsoft Office error code 30016-4 can occur during updating, opening, or uninstalling MS Office 365, MS Office 2013 and MS Office 2016. This analytical flaw which is associated with the Microsoft Office programs on the system. Additionally, there could be a number of generic causes behind the occurrence of this technical glitch. Such as Antivirus application, Firewall rules, Microsoft Office related system files error, pre-installed Microsoft Office suite or may be due to the conflicts between the network of the system.

However, if you are experiencing the same error on the system and looking for some troubleshooting solutions to fix it, then, don’t fret. Here is the complete list of the troubleshooting hacks to eradicate this glitch effectively. Check the system to verify if the issue gets resolved after executing each troubleshooting hack. So, without delaying too much, let’s get into the solutions directly.   

Relevant Causes for the Microsoft Office Error Code 30016-4

As the Microsoft Office is very much approved by the various Windows users, but still it can show some technical error code like Microsoft Office error code 30016-4. This technical flaw can result due to plenty of reasons. Here, in this post, we are going to discuss some factors which are the main causes behind this frequent error code.

• An antivirus program can be the main causes of this error. It can block all the process while installing the Microsoft Office.
• This error can also appear when the proxy is enabled.
• Incomplete\partial\change\removal of a previous Office suite can prevent you from installing the latest version.
• The proxy setting of the system and the internet connection may avert the system to complete the installation process of Microsoft Office.
• A pre-existing version of the Microsoft Office suite obstructing the installation process.
• If you are connected through low and improper internet service.
• This frequent issue may arise because of the corrupted system files.
• If the Windows Registry is corrupted, then this technical flaw can also befall.     

Circumstances Triggered by the Microsoft Office Error Code 30016-4

There are some common symptoms and circumstances by which you can easily identify this frequent error of the Microsoft Office. So, take a look at the below passage in detail to know the common symptoms of this frequent technical glitch.

• The process of the installation of the Microsoft Office might stop abruptly.
• This error code along with an error statement continuously blinks on the system’s screen.
• The performance of the system degrades.
• Your system may perform and work sluggishly.

Now, you can go through the following section of this article to know the best and effective troubleshooting hacks to eradicate this error. So, scroll down and read on.

Effective Ways to Troubleshoot the Microsoft Office Error Code 30016

There are multiple ways in which you can easily resolve this particular problem of the Microsoft Office. We are going to list some simple and effective ways which you will be able to implement in an easy way.

Way 1: Repair the Microsoft Office Application on the System

The Microsoft Office 30016-4 error code will be resolved whenever the  Microsoft Office repair tool replaces all the corrupted system files of the system. Moreover, this is the most fundamental troubleshooting way that will surely help you to fix the flaw soon. So, follow the below steps:  

1. At first, you need to go to the Control Panel on the system using the Start button.
2. After that, tap on the Programs option from the Control Panel.
3. Next, you need to choose the ‘Programs and Features’ option under the Programs option.
4. Now, you need to select the Office product by tapping on it that you want to repair.
5. After that, choose the Change option.
6. Next, you need to tap on the Quick Repair option and select the Repair option.
7. In case, if the Quick Repair option fails to resolve this error, then you need to choose the Online Repair option.
8. After that, tap on the Repair option under the Online Repair.
9. Once the above steps are complete, restart the system.

After completing all the steps, you need to check the system to verify that the error code is fixed or not. If not and the issue still persists, then you need to move out to the next troubleshooting method.

Way 2: Remove the Microsoft Office Application from the System  

If the first method is not workable for you, then you can perform the steps to remove the Microsoft Office application from the system. Moreover, uninstalling the Microsoft Office is not a troublesome task. You just need to follow some easy steps. Here, we have discussed some simple troubleshooting steps to remove the Microsoft Office with ease. The steps are as follows:

1. At first, you need to go to the Control Panel using the Start button.
2. After that, tap on the Programs option from the Control Panel.
3. Next, you need to choose the ‘Programs and Features’ option under the Programs option.
4. Now, you need to select the Microsoft Office Suite by tapping on it.
5. After that, choose the Remove option. You may find this option at the top left corner on the Microsoft Office Suite window.
6. After that, you need to restart the system.

Once all the steps are done, then you need to check if the Microsoft Office is showing the error code or it has been resolved.  If the error still persists, then move to the next method.

Way 3: Remove the Microsoft Office Manually

If the above troubleshooting method is not enough for you or you are unable to remove the Office suite by following the above steps. Then, there is another alternative in your rescue. You can easily remove the Microsoft Office manually to resolve the error 30016-4. Proceed with the following troubleshooting steps to manually remove the Microsoft Office program.

Step 1: Remove the Windows Installer Packages from the System

At first, you need to remove the Windows installer packages from your system. To do so, follow the below-stated steps.

1. At first, you need to find the Microsoft Office 16 file of the system which is typically located in the: C:\Program Files\.
2. After that, you need to right-click on the Microsoft Office 16 file to select it to proceed further.  
3. Next, tap on the Delete option.    
4. After that, you need to restart the system.

Step 2: Remove the Microsoft Office Scheduled Tasks of the System

Now, you need to remove the Microsoft Office scheduled tasks of the system. Just go through the following section and perform the steps carefully. The steps are as follows:

1. At first, you need to go to the Command Prompt screen. In addition, open the Command Prompt window as an administrator.       
2. After that, you need to write the following commands under the Command Prompt box and tap on the Enter key after each one of the commands. The commands are:

• First is: schtasks.exe /delete /tn “\Microsoft\Office\Office Automatic Updates”
• Second is: schtasks.exe /delete /tn “\Microsoft\Office\Office Subscription Maintenance”
• Third is: schtasks.exe /delete /tn “\Microsoft\Office\Office ClickToRun Service Monitor”

Once the above steps are done, you need to restart the system.

Step 3: Access the Task Manager to end the Click-to-Run Tasks

If you want to end the click-to-run tasks on your system, then you need to use the Task Manager. Moreover, this can help you to remove the Office suite from the system. Follow-through the below-described steps.

1. At first, you need to go to the Task Manager of the system.
2. After that, you must tap on the Process tab from the Task Manager option.
3. Now, if you find that the below-described processes are running on the system, then you need to right click on each one to select it. Once you select each process, you need to tap on the End Task option to cancel it.

• .exe
• setup*.exe

After completing all the steps, you need to restart the system.

Step 4: Delete the Microsoft Office Related Files from the System

You need to perform some easy steps to delete the Microsoft Office related files from the system. Moreover, this troubleshooting method can eliminate small bugs in the system. So, follow the steps which are stated hereunder.

1. At first, you need to press and hold down the Windows logo key and at the same time press and hold down the R key to invoke the Run Dialog box.
2. Now, you need to go the Run Dialog Box and enter the ‘%ProgramFiles%’ command in the box. After that, tap on the Enter key on the keyboard or choose the OK option to proceed further.
3. Now, you will get the list of options. Choose the ‘Microsoft Office 16’ file to delete it.
4. After that, again you need to go the Run Dialog Box and enter the ‘%ProgramFiles(X86)%’ command in the box. After that, tap on the Enter key on the keyboard or choose the OK option to proceed further.
5. Delete the ‘Microsoft Office’ file.
6. Once the above steps are done, you need to restart the system.

Way 4: Steps to Disable the Antivirus and Firewall of the System

You may encounter with this annoying error code while updating or installing the Microsoft Office application on the system. In addition, the Microsoft Office error code 30016-4 might occur because of the restrictions of the firewall and the network of the system. Thus, by disabling the firewall and the network of the system, you can easily resolve this issue. To do it, check out the steps below:

Procedure to Disable the Firewall

1. At first, you need to go to the Start button on the system.
2. After that, you need to open the Control Panel.
3. Next, navigate to the ‘System and Security’ option under the Control Panel.
4. Now, you need to tap on the Windows Firewall option to open it.
5. After that, you need to choose the ‘Turn Windows Firewall On or Off’ option.
6. Afterward, tap on the ‘Turn-off firewall for both private and the public network’ option to disable the firewall of the system.

Procedure to Disable the Antivirus Application

1. At first, you need to go to the antivirus application which is installed on the system.
2. After that, double-click on the antivirus icon to open it.
3. Next, you need to tap on the Settings option.
4. After that, you need to navigate to the ‘Real-time Protection’ option under the Settings option.
5. Now, disable the ‘Real-time Protection’ option by turning it Off.
6. You need to navigate to the firewall of the antivirus application and after that, you need to disable the option.
7. Next, you need to select the YES option to confirm your choice.

Now, the process is complete. Hence, you need to try to upgrade or install the Microsoft Office suite to verify whether the issue is resolved or not.

Winding Up

Hopefully, the above-stated troubleshooting hacks will fix this annoying Microsoft Office error code 30016-4 from your device. Therefore, try the above-described easy and effective ways and see which one is giving you the ultimate troubleshooting solution, in no time. Somehow, if you find any sort of troubles, then never think twice to post about it, in the comment section and let us know your review regarding this solution.