Mainly, the Lexmark fuser error happens once the machine fails to withstand the standby temperature within the provided time. This is very common for the Lexmark printer. The main reasons behind the error are the wiring. Moreover, the Fuser may fail prior to its working durability depending on its printing conditions. In addition, a paper jam is also responsible for this error.
So, if you are using a Lexmark printer and going through this problem and looking for a hassle-free solution, then you are on the right page. In this post, we will expose all the superior clarification to resolve the issue at the earliest.
In this article, we will discuss some effective fixes that you can apply in order to solve Lexmark Fuser error. We understand that this is one of the most recurring problems that is faced by most of the Lexmark users. So, to resolve the issue, you can try the following solutions that are mentioned in the section below.
You often find that the printer gets heated up and refuses to function properly and as a result, Lexmark service fuser error occurs. Under such cases, all you can do is reboot the Lexmark printer. Sometimes, the problem gets fixed just by turning Off the printer. Some obstacles may also generate heat, that is why it is also advised to inspect inside the printer. If you find any paper inside the printer or other things then, remove them and turn On the printer and check whether the problem gets fixed or not.
Sometimes, the problem with the power source also causes Lexmark fuser error. The power cable should not be loose or broken from anywhere. You need to disconnect the power cable and examine the cables properly. Then, reconnect the power cable and turn On the printer and check the status of the error. Otherwise, follow the next method to fix the issue.
To fix the issue, you can change the fuser and replace with a new one. At first, inspect the internet connections on the fuser unit and then, remove the fusing assembly, as well as, reset it. Otherwise, change the fuser. But, it is recommended that you should buy it from the official website of Lexmark.
An outdated version of Lexmark always affect the printer to run properly and it is possible that the Lexmark fuser error also happens due to this. Therefore, you must be updated with the fresh version to fix the error. Following are some of the effective step to do so:
After the installation process completes, restart the system and Lexmark printer will no longer be affected by this issue.
Sometimes, the jammed paper can be also responsible for this annoying situation. So, you need to remove the jammed paper from the printer as early as possible. Therefore, in order to fix the issue, remove the paper from the paper tray. To do so, take out all the loose sheet from the paper tray and smoothly remove the jammed paper. After completing the process check whether the problem still persists or not.
These are the solutions that we have provided to resolve the Lexmark fuser error. We hope, after going through these steps and procedures you will be able to fix the problem without any trouble. In case, if you find any difficulties while doing the steps you can post your doubts in the comment section below.