ERROR CODE 0X

Efficient Ways To Fix Faulty Hardware Corrupted Page

Computer is the most important device in our life nowadays. We use computers for various purposes. Like all other electronic devices, laptops and computers have some technical flaws.  While using the computer, we might face some hardware or software problems. One such technical problem include faulty hardware corrupted page. We face this hardware problem if there is an issue with the RAM of the computer. Also, if there is a problem with the management interface, then we may face this issue. Therefore here we are going to discuss some efficient ways to fix faulty hardware corrupted page.

Potential Reasons Of The Faulty Hardware Corrupted Page

The background reasons of the faulty hardware corrupted page are as follows:

  1. Due to hardware change we might face this issue.
  2. Also, if we don’t update the drivers in our computer we might face this issue.
  3. A faulty RAM is the cause of this error.
  4. If we have enabled the fast startup on our computer before then we might face this issue.
  5. Also, if you use a backdated management interface then we might face this issue.

Methods To Resolve Faulty Hardware Corrupted Page

The methods to fix the faulty hardware corrupted page are listed below:

  1. Disabling the fast startup.
  2. Running a RAM check.and the SFC command.
  3. Updating the Intel management engine interface(IMEI) driver.
  4. Running the CHKDSK command.
  5. Disabling the overclocking from the BIOS

Disabling The Fast Startup

Follow the steps to turn on the fast startup:

  1. At first, press the ‘Windows’ logo key and the letter ‘R’ key together from the keyboard.
  2. Then on the run box type the command ‘powercfg.cpl’ and then press the ‘Enter’ key from the keyboard.
  3. Now select the option  ‘Choose what the power button does’.
  4. After that select ‘Changes settings that are currently unavailable’.
  5. Then remove the tick mark from the box ‘Turn on fast startup9recomended)’.
  6. Now select the option ‘Save changes’ to save the changes to turn off the fast startup.
  7. Then reboot the computer.

Running A RAM Check. And The SFC Command

To check the RAM and run the SFC command go through the steps:

  1. Press the ‘Windows’ logo key and the letter ‘R’ together from the keyboard to open the ‘Run’ box.
  2. Then type the command ‘mdsched.exe’ on the search panel and select the option ‘OK’.
  3. Now select the ‘Restart now and check for problems(recommended)’ option.
  4. After that, the computer will reboot.
  5. Then the scan process will start.
  6. Once the scanning process finishes press the ‘Windows’ logo key and the letter ‘X’ together from the keyboard.
  7. Now select ‘Command Prompt(Admin)’ to open the ‘Command Prompt’ in admin mode.
  8. In the ‘Command Prompt’ type the command ‘sfc/scannow’  and press the ‘Enter’ key from the keyboard.
  9. Then find the issues and resolve it accordingly.

Updating The Intel Management Engine Interface(IMEI) Driver

If you are using a backdated ‘Intel Management Engine Interface(IMEI) driver on your computer then you might face this issue. Thus go through the steps to update the IMEI driver on your computer.

  1. Press the ‘Windows’ logo key from the keyboard.
  2. Then type the command ‘devmgmt.msc’ on the search panel.
  3. After that, the ‘Device Manager’ window will open.
  4. Then open the ‘Services’ in the window.
  5. Now right click on the ‘Intel Management engine Interface’ to open it.
  6. Then select the option ‘Update’ to update it.

Running The CHKDSK Command

Go through the steps to run the CHKDSK command in this way;

  1. Press the ‘Windows’ logo key and the letter ‘R’ together from the keyboard.
  2. Then on the ‘Run’ box type the command ‘cmd’ and press the ‘Enter’ from the keyboard to open the ‘Command Prompt’ on your computer.
  3. Now on the command prompt type the command ‘chkdsk /f /r c:’ and then press the ‘Enter’ key to run the command.
  4. Then press the letter ‘Y’ from the keyboard if asked for any permission.
  5. Now this command will resolve all the errors.

Disabling The Overclocking From The BIOS

To disable the overclocking from the BIOS go through the steps:

  1. At first press the ‘Shift’ key and the ‘Power’ key together from the keyboard.
  2. Then select the option ‘Restart’ to reboot the computer.
  3. Now to open the ‘Charm Box’ press the ‘Windows’ logo key and the letter ‘C’ from the keyboard.
  4. Then select the ‘Settings’ and choose the option ‘Change PC Settings’.
  5. After that select ‘General’.
  6. Then select the option ‘Advanced startup’ and then choose the option ‘Restart Now’.
  7. Now on the ‘Troubleshoot’ select the ‘Advanced Options’.
  8. Then select the option ‘UEFI Firmware Settings’.
  9. After that choose the option ‘Restart’ to reboot the computer.
  10. Once the computer reboots choose the tab ‘Advanced’ and then swipe to ‘Performance’.
  11. Then locate the option ‘Overloading’ and then disable it.
  12. Now press and release the ‘F10’ to save the changes.

Thus by following the methods as mentioned above, you can easily resolve the issue without any difficulty.

This will eventually resolve the issue. For any other hardware issues related to the Windows computer, you can check our official website for quick solutions. Also, keep in touch with us to receive further updates.

Call Now ButtonCall us Now
error: Content is protected !!