Dell system comes with the e-PSA diagnostics for which it might develop certain errors. One of the most common error that most users are encountering is error code 2000-0151. This error is generally associated with the hard drive. This error does not allow you PC or system to boot at all. Even you cannot properly operate your Windows. So in this article, we are going to discuss the most effective methods to troubleshoot Error code 2000-0151 on your Dell laptop. Just keep reading this article properly and implement the guidelines accordingly.
Causes Behind Dell Error Code 2000-0151:
To overcome this error code at first you have to know about the main causes of this error. Here we discuss the main causes of the Error code 2000-0151. Just take a look below:
Dell error codes generally occur due to
- If the hardware related data is deleted
- Hard drive failed during diagnostic.
- If the hard drive status in BIOS is wrong.
So this type of error generally occurs due to the hard drive failure in your system. Now check the alternative solutions below.
Methods to Troubleshoot Dell Diagnostic Error Codes:
Here we will discuss some easy steps to get rid of Error code 2000-0151. So check the methods below to get this error resolved at the earliest.
Method 1: Run a Hardware Test
It is always important to run a hardware test on your computer. If you are run the hardware test in your Dell laptop then you can overcome this issue very easily. So to perform this step, do the following:
- At first, start your PC and keep taping the F12 key from the keyboard.
- Then, go to the one-time boot menu or you can run the diagnostics by pressing and holding the Fn key.
If you get the error message again then you have to contact the system manufacturer. If not then you are done.
Method 2: Check The Hard Drive Status in BIOS
If the above method does not work for you then you can try out this method. To perform this method:
- Start your system normally and press the F2 key continuously.
- Now, you enter in the BIOS. From the BIOS you should able to locate the hard drive.
- After that, select the System information from the General setting. You will be able to check the status of the Hard drive.
- Now, locate the Hard drive.
If the hard drive is detected then it shows you Detected message otherwise it will say not detected or unknown. It may fix Error code 2000-0151. Or you can try the next option.
Method 3: Hard Drive Reset
Sometimes you may notice that the hard drive connection become loose. At that time you have to reset the Hard drive correctly. If you want to reset the hard drive then follow the steps below:
- At first, you have to shut down your computer completely.
- Then, insert the CD/ DVD drive.
- Click on the run the hardware test option.
Now check for the error code it will fix the problem. If not then you can go for the next option.
Method 4: Use External Hard Disk Drive
If the above steps do not help you, then you can perform this step where you have to use an external hard drive. You can also try connecting it to a secondary drive. Your windows will automatically connect with the new drive. Now, try to recover all the deleted data. This process will help you to overcome this error.
Method 5: Reinstall the Operating System
This is another effective method that can also fix Error code 2000-0151. So, to overcome this error try to reinstall Windows OS again. You can download the Windows Operating System again, from the Windows official website. After installation of the data, try to back up all your deleted data.
Hence, in this article, we have discussed all the common methods to fix Error code 2000-0151. Hopefully, this article will help you to understand and troubleshoot this error without any hassle. If you have any question regarding this error then you can leave it in the comment section below.