Type to search

Know About The Possible Methods to Fix Dell Printer Error 016 302

According to the Dell printer users, the main cause of the Dell printer error 016 302 is the Memory Drive. Also, many users have reported that they have received this error while they are trying to connect it with the network. Generally, Dell printer error code 016 302 occurs when you are trying to print a page from Texteditor, Mac Pro, Safari or Firefox web browsers. So, this is a common error of the Dell printers. Fortunately, there are so many handy ways to fix the Dell printer error message 016 302.

From our research, we have found some handy ways, so that you can easily solve this problem. In this article, we are going to explain the methods in details. Hope, you can understand easily and you will get the exact solution.

Handy Ways to Fix the Dell Printer Error 016 302

Now, we are going to discuss the most fundamental and effective methods to solve the Dell printer error code 016 302 permanently. You should follow the steps below and apply. Hope, this article really helpful to you:

Method 1- Restart the Printer with the Data Cable removed

This is the first step that we are going to explain. Basically, this is the simplest method to fix the error. So, before taking an expert’s help, you need to try this method:

  1. In this step, at first, you have to switch the printer off.
  2. After that,  disconnect any kind of data cables such as Ethernet, USB or Parallel or wireless adaptors (if any).
  3. When the data cable is removed then you have to switch on the printer.
  4. Now, you need to check the printer starts properly or not.

If the problem still exists, then you need to follow the next method.

Method 2 – Clear the Print Queue

If the previous method doesn’t work out, then you can try this method to fix the problem. Firstly, you have to clear all jobs from the Windows print queue and then, you should insert the data cable again. Once done, print a windows test page and check the problem is resolved or not.

Method 3 – Change the IP address of the Dell Printer

One of the simplest ways to solve the error code 016-302 is changing the IP address of the printer. To do this, you have to simply reset the network settings and then, install the Dell printer on your system. After doing the above steps, you need to go to the web interface for print server settings and change the IP address.

Method 4 – Remove the Memory

If the previous method doesn’t work out, then you have to follow this method to solve the problem. Basically, this is a simpler way. To perform this task, you need to replace the memory slot.

Method 5 – Replace The ESS Board

If you are still getting the problem, then you can replace the ESS board. This may fix the Dell printer issue.

In this way, you can fix the Dell printer error 016 302. Hope, the instructions which we have discussed above, you can understand them easily. Moreover, this article is very much effective and helpful as well. So, if you are getting the Dell printer error 016 302 restart printer, then you have to read the article and try to follow the instructions carefully. Surely, you can find the exact solution. Still, if you are getting the error then we suggest you can take an expert’s help.