D-Link Router Not Working?: Easy And Effective Process To Solve

D-Link is one of the leading brands known for producing high-quality routers. It holds its position due to its superior features and connectivity. But, D-Link is not free from technical glitches just like others. Among them, the D-Link router not working is one of the vital issues faced by several internet users. This problem not only happens with the old router but also can happen with your brand new D-Link router. When this issue occurs, then it’s quite impossible to connect to the Internet.

If you are in the same situation, then there is nothing to be worried about. If you are unaware of the solution, then this article can help you with some easy methods which can solve this issue within a short span of time. Hence, you are advised to go through the next section carefully.

Common Reasons behind D-Link Router Wireless not Working

Have a look at the causes given below and compare them with your situation to get a competent solution afterward:

Connection Error:

This refers to the unexpected breakdown of internet connectivity. This problem is associated with a connection error.

Interruptions:

If the internet connection is not stable, as well as, you face several interruptions, then this also can be the reason behind the D-Link router not working issue. In addition, if there is an issue with the login procedure for the D-Link router, then you may face the same issue.

Hardware problem:

If there is any hardware problem within the router or with the LED lights of the router, then you can face this issue. Hence, you need to visit the login page of the D-Link router to check the online status of the router.  

Corrupted Firmware:

Firmware problems can be seen in the old DLink routers. Basically, the firmware of the router gets out-of-date after a certain period of time. Hence, you always need to upgrade the firmware in time-to-time. And, this corrupted firmware can force the D-Link router to stop its normal operation.  

Problem with the Power Supply:

If there are any problems with the power source like hardware impairment with the power cable, then you can face the D-Link router wireless not working issue.

Amazing Tips and Tricks to Fix D-Link Router not Working Issue

Now, you must be familiar with the reasons behind the D-Link router not working problem. However, despite the various reasons, you need to try to fix those issues by following the troubleshooting steps as mentioned below:

Step 1:

If the D-Link router is placed inside an enclosed place (e.g cabinet), then first, remove it from there. Now, you have to set the D-Link router closer to the system in a centralized position. Check if the broadcast connectivity becomes more stable or not.

Step 2:

Now, unplug the router. If you prefer, then you can power off the 2.4 GHz cordless bluetooth devices or phones, currently running closer to the network. Because, these can prevent the broadcast signal coming from the D-Link router. Now, find the small reset slot on the back edge of the router, if the issue persists. You can find the slot at the left of the power cable.  

Step 3:

Now, you have to unfold a paper clip, as well as, enter the end of the clip inside the reset slot to hit the Reset button on the router. Here, you need to hold the clip inside the slot for minimum 10 seconds. It will reset all the options of the D-Link router to its factory default condition.  

Step 4:

Go to the web browser as well as navigate to the ‘192.168.0.1’ address to go to the Setup Page of the D-Link router. Now, you have to enter ‘admin’ in the User Name field. Then, hit the OK button. Here, you should leave the password section blank.  

Step 5:

Hit the ‘Setup Wizard’ icon. Now, you have to choose the ‘Launch Internet Connection Setup Wizard’ option. Then, hit the Next button. Enter a new password for the router, in the text box field. Now, you need to hit the ‘Next’ button again.

Step 6:

Now, you need to follow the on-screen instructions to choose the Time Zone, as well as, the type of high-speed Internet connection. Hit the Next. Then, click on the OK button. Go to the web page of the D-Link router.

Step 7:

Hit on the ‘See All Products’ option and then, choose the link based on the wireless D-Link router’s model. Click on the ‘Support Resources’ option. Then, select the ‘Firmware’ from the list. Hit on the ‘Download Now’ option to download the latest version of the router firmware version available.

Step 8:

Now, you need to go back to the main menu of the router by accessing the Web address ‘192.168.0.1.’ Then, type ‘admin’ on the User Name section. Type the newly created password in the specific field. Then, hit the OK button.  

Step 9:

Click on the Tools options. Then, choose the option ‘Firmware.’ Go to the ‘Browse’ tab and select the firmware file name that you downloaded earlier. Click on the ‘Open’ option. Select the option ‘Save Settings’. It will upgrade the firmware of the D-Link wireless router.

Step 10:

After that, move the cursor to the right lower side of the display and right-click on the Network icon. Enter the name of the D-Link router to connect to the internet.  

Lastly

In the above guidelines, we have discussed some easy troubleshooting steps to fix the D-Link router not working issue. We hope, after successfully performing the above steps, it will help you to put an end to this problem. If you still need any further help, then you can seek help from a professional expert. Additionally, you can post your query in the comment section given below.