When it comes to choosing the best scanner in the market, most of the people go for the Canon scanner. But sometimes, they get an error code on their Canon MG 2220 model. The error says Canon MG 2220 won’t scan. While doing important work, the scanner suddenly shows the message. Hence, it is a quite annoying problem for you. The power-related problem can cause this error. In addition, the USB does not connect properly, then the Canon scanner unable to scan. Outdated scanner driver is also responsible for this problem.
If you are unable to solve the issue due to the busy schedule and do not know what to do, then this article will help you to get rid of this situation. Therefore, go through the content carefully and know what are the effective procedures to fix the issue.
Possible Reasons behind the Scanner Won’t Scan
There are several reasons responsible for this error. The main cause that the scanner unable to scan is the connection problem. On the other hand, if the driver is not installed properly on your system, then you can find that the Canon scanner unable to scan the files and data.
Effective Fixes to Troubleshoot Canon Scanner Won’t Scan
You can fix the issue with the help of the following steps which are mentioned in the below section. Not only that, but you can also fix other scanner-related problem that you have might face while using the scanner. Hence, read the article carefully and apply them accordingly. Make sure that you do the procedure as described here and do not skip any steps while performing the below methods.
Fix 1: Check the Connection
To solve the problem, first, you need to check the USB adapters and the power cables properly that are connected with the scanner. The issue can occur when there is a problem with connection failure or USB cables. Hence, make sure the plug and the cables are connected in the correct way.
Fix 2: Restart the Scanner
To get rid of such situation on you Canon scanner, one of the most effective solutions is restarting the device. First, you need to turn off the scanner and disconnect all the power cables that are connected with the device. After that, wait for a moment and then reconnect all the cords and turn on the scanner.
If you are unable to fix the error even after trying the above fixes, then apply the below mentioned solutions.
Fix 3: Update the Driver
Another effective solution is to update the scanner driver. You need to check whether an update is available for the scanner driver. To check, at first, go to the Control Panel option and then select Programs and Features options. A list of applications will appear on the screen. Choose Canon scanner for the list and right-click on it. Check for the available updates and download the fresh version of the Canon scanner. Install it on your system. After successfully installing the updated driver, restart the scanner and check whether the scanner is able to scan or not.
On the whole, these are the fixes for the Canon mg2220 won’t scan problem. Hope, after reading the post and applying them you can fix the problem with your own without any trouble. If you face any problem while applying them, just post your queries in the below section.
