Type to search

Windows Could Not Automatically Detect This Network’s Proxy Settings On Windows 10?

‘Windows could not automatically detect this network’s proxy settings’ error message appears on the screen mostly if you have not updated the Network Adapter for a long time.  

Sometimes, issues with the TCP/IP, corrupt system files, are also valid reasons for this error message. Occasionally, if the proxy server option is enabled, or Internet Explorer application gets corrupted then also you might face this glitch.

Fortunately, you can easily get rid of it with the given resolving techniques.

Windows Could Not Automatically Detect This Network’s Proxy settings Windows 10: Quick Solutions

In order to remove the error message permanently, you have to follow the guide given below:

Solution 1- Restart the Network Adapter

The easiest way to fix the issue is to restart the network adapter. To do so, first, proceed to the Toolbar and after that, right-click on the Network icon. 

Then, choose ‘Open Network and Internet Settings’ from the available options. On the next window, proceed to the Ethernet. Furthermore, tap on the ‘Change adapter settings’ option.

In addition, locate the network connection. Once found, right-click on it and select Disable from the available options.

Now, again right-click on the network but this time click on Enable to restart the network adapter. Next, check if the error has been resolved or not.

Solution 2- Automatically Enable the Obtain DNS Server Address

Lots of users claimed that after automatically obtaining the DNS, they quickly resolved the situation. In order to implement the method, here are the steps that need to follow: 

Step 1

Go to the ‘Network and Sharing Center’ and proceed to the Change Adapter Settings option.

Under here, scroll down and locate network connection. Thereafter, right-click on it and choose Properties from the available options. 

Step 2

Choose Internet Protocol Version 4 (TCP/IPv4) on the next page. Afterward, tap on the Properties button. Then, select the box next to the ‘Obtain DNS server address automatically’ option. 

Hit the OK button to save the changes. Finally, reboot the Windows 10 device and if the error message still appears on the screen, then here is another alternative for you.

Solution 3- Update the Network Adapter

To update the Network Adapter to its best-recommended version, first, press the Windows and R keys together on the keyboard. 

After that, enter ‘msc’ in the run field as well as hit the Enter key to open the Device Manager. Within the Device Manager, you have to locate and expand the Network Adapter. 

Thereafter, right-click on the network and select the Uninstall device. Furthermore, tap on the Action tab and select the ‘Scan for hardware changes’ option from the menu.

Now, the Device Manager will automatically install the adapter. Once done, restart the computer and this solution should fix the problem.

Solution 4- Disable the Proxy Server Option

If the above solutions are unable to fix the error, then turn off the Proxy Server option. At first, launch the Run dialog box. Then, enter ‘inetcpl.cpl’ in the run field.  Furthermore hit the Enter key.

This will lead to the Internet Properties tab. From there, move to the Connection tab. After that, select the LAN settings option. 

On the next window, ensure that the ‘Use a proxy server for your LAN’ option is unselected. Tap on OK. Reboot your device and try to note if the error message persists or not.

Solution 5- Reset the Internet Explorer Settings

To reset the Explorer settings, switch to the Internet Properties tab first. Follow the steps given in solution 4 and then click on the Advanced option. 

Go to Reset Internet Explorer settings part and after that, click on the Reset button. On the next page, select the ‘Delete Personal settings’ option and hit the Reset button.

To save these changes restart the computer. Now, check the error status and in case the error message still pops up on the screen you can try to reset the TCP/IP.

Solution 6- Reset the TCP/IP

This is another easy fixing technique that you may try to fix the error. To implement this solution, press and hold the Windows and X keys together. Then, choose Command Prompt from the menu.

After that, enter ‘netsh int ip reset resetlog.txt’ within the Command Prompt. Also, press the Enter key to run the command.

Finally, you have to reboot your device and if you are still dealing with the error, then move to the next solution.

Solution 7- Run the Windows File Checker

Sometimes by using the Command Prompt, you can fix the error. In order to run the System File Checker, first, open the ‘Command Prompt as administrator’. Afterward, type ‘sfc/scannow’ in the command field and press the Enter key.

After that, the scanning procedure will start. It can take 15 to 20 minutes to complete. When finished, see whether the error message has been removed or not.

However, if not fixed, then you may have to run the DISM tool. To do so, again open the Command Prompt as administrator. After that, type ‘DISM/Online/ Cleanup-Image/ RestoreHealth’ as well as press the Enter key.

Solution 8- Use System Restore

Some users also reported that after installing a new application or after changing the network configuration the error message showed up on the display. In this situation, you have to perform a System Restore.

In order to do so, press the Windows and S keys simultaneously on the keyboard. Next, click on the ‘Create a restore point’ from the menu.

After that, the System Properties window will appear on the display. Scroll down and click on the System Restore option.

Thereafter, the System Restore window will appear on the screen. Simply tap on Next and then, all the recent restore points will appear on the screen. Under here, locate and click on the ‘Show additional restore points’ option.

Choose the desired restore point as well as tap on Next. To complete the remaining procedure, follow the online instructions. When done, reboot the Windows 10 device and now you will surely overcome the situation.