Windows 10 is the most widely used Operating System designed and released by Microsoft. It certainly brings quality and performance with it. Despite being the first preference of the majority of computer users, Windows 10 is not free from technical glitches. Users often complain about the frequent system errors that they come across. One such error is the Windows 10 freezing on startup. It occurs when the Device Manager of your system terminates the hardware device.
Windows 10 hangs on boot because of too many applications running in the background. Moreover, a faulty driver can also lead to Windows 10 freezing on startup. Also, you can face this issue if the Operating System is malfunctioning. A malfunctioning operating system can also cause issues like the Windows 10 Screen Flashing, which has its own solution protocol. This becomes quite annoying if you find that Windows 10 freezes on boot every time you start the computer. If you want to resolve this problem on your own and if you are looking for solutions to fix it, then go through this article.
Understanding the cause of the error is a fundamental step towards fixing the issue. If you are able to detect the cause of the problem, then take a look at some of the easy hacks given below and see which one matches yours.
Starting your Operating System in Safe Mode is probably one of the best ways to troubleshoot system errors. You will get a feedback of your problem if you run the Safe Mode. So, it is always recommended to start with this procedure at first.
The information which is known as ESCD (Extended System Configuration Data) are stored in the BIOS of your system. It sometimes gets corrupted due to several factors. In such cases, reset it is the best shot you can opt for:
Sometimes, a single restart of the Explorer process can fix the freezing of your Windows 10 Operating System. Follow the given stepwise procedure to terminate it and start again.
Incorrect hardware configuration is one of the primary reasons why Windows 10 hangs on boot. This hardware misconfiguration can be because of the faulty setup of your recently placed hardware. The RAM, the graphics card, and the processor of your system can malfunction. In these circumstances, replace the hardware of your computer with dummy hardware to check if the problem still exists or not. At the same time, monitor the connection of the cables also. Check whether the power socket, the display adapters, and the other chords are working properly or not.
Follow the easy methods given in this guide and get rid of the frequent hangs at the earliest. Apply the steps in the correct order and do not make any unnecessary changes in the settings.