While using your computer if you ever face the error code 0xC0000428 along with Blue Screen Death or the BSOD, then this guide is for you. This is a very annoying issue. The problem might be the reason for data loss as well. Here, in this article, we are going to provide the solution of the Windows 10 error code 0xC0000428. So, if you want to put an end to this bug, then you need to perform the below steps. So, let’s start.
Solution # 1 Use The Following Commands
You can fix this error code with the help of the following commands which are mentioned in the below section. Not only this issue, but you can also fix various error codes with the help of this method. Basically, this error occurs when you want to boot your system. In order to fix the error, go through the next section.
Step 1
Restart your computer and wait until the boot screen appears. After that, open the Windows Advance option and turn on it. After, turning on the Advanced option, you need to choose some of the different options which will help you to boot up your device.
Step 2
After, completing the above-mentioned steps now move on to the next step, which is Booting up your device in Safe Mode with the using of Command Prompt. After, opening the Command Prompt, you need to copy and paste the commands which are given below. And press the Enter button after each of the commands and run it:
First – bootrec/fixMBR
Second – bootrec/fixBoot
Last – bootrec/rebuildBCD
Step 3
After that, you have to restart your system. Then, try to boot it and access the Windows Advanced options menu. Accordingly, you need to try to boot the PC with a USB drive or a recovery disk.
Step 4
While booting the system, select your preferred language. Now, you have to hit on the option ‘Repair Your Computer’. Now, choose the Command Prompt option and type again the commands which are mentioned earlier.
Solution # 2 Disable Driver Signature Enforcement
You can get rid of the issue by Disabling the Driver Signature Enforcement. The problem might occur due to a fault with the Driver Signature Enforcement. You can use any preferable software to proceed with this solution. The undergoing instruction will help you to do it.
There are different types of methods that will help you get rid of the issue. This solution will help you to move on to the Advanced Startup menu. Here are the procedures:
Procedure 1: Use The Login Screen
Go through the steps to do it:
- At first, go to the Computer’s login screen while logging off your account. After that, turn on your computer by holding the Shift key while pressing the Restart button from your device.
- After that, press the power icon which is located on the Start menu or you can use any other way out that can lead you to the login screen
- Then, you have to connect the keyboard with your device to run the above-mentioned steps. But you need to remember that, these specifications wont work with the on-screen instructions.
- After that, the Advanced Startup option will appear to your screen. This will help you to fix the problem.
Procedure 2: Use The Windows 10 Settings Option
If you fail to do the previously mentioned steps, then you can use the Windows 10 settings option.
Step 1
To do it, at first, you need to go to the Start button, and then, select the gear symbol. This will help you to open the Settings menu. You can also find it on the search bar. Which is located on the top of the right side corner. After doing so, move on to the next step.
Step 2
Then, you need to scroll down to the Settings application which is located on the bottom of your computer screen. After that, click on the Update and security option. And then, go to the steps written below.
Step 3
After, completing the previously mentioned steps, tap on the Recovery option. You will find this option on the tabs which are located on the left-hand side of the Update and Security option of your computer screen.
Step 4
When you are done the earlier steps, then click on the Restart Now option. After, restarting your system the Advanced Startup options will appear to your device’s screen.
Procedure 3: Use The Command Prompt
If the previously mentioned steps did not help you to fix your problem then, switched to the Command Prompt. To do it:
- At first, you need to open the Command Prompt option in your Windows 10 system. Or you can type “cmd” in the search box this will help you to launch it. If you are choosing the first way to open it will give you the result of administrator privileges.
- The Run dialog box will also help you to open the Command Prompt. You can find it on the Start menu. Which is located on the bottom of the left-hand corner from your computer screen.
- After that, you have to Copy and Paste the commands which are written below to redirect the Advanced setup screen as in:
shutdown /r /o
- When you are done with the previously mentioned steps, you have to be sure that, you have saved everything that you have working. Now, shut down the computer directly.
- After that, click Close button at the time when you have seen that you are going to be signed off message.
- Then, the Windows will be closed and then, the ‘Please wait’ message will appear on the screen.
- Just after that, the Advanced Startup option will appear several times.
Procedure 4: Use The Windows 10 Recovery Drive
You can fix the issue with the help of Windows 10 Recovery Drive as well.
Step 1
To do it, at first, you need to turn on the computer and then, you have to insert a bootable Windows 10 DVD or you can use the USB drive which is configured properly. Then, move on to the next step.
Step 2
If you don’t have the proper Windows 10 DVD, then you need to the Windows version that, will help you access the settings option.
Step 3
After that, you need to boot up your device and insert it by restarting your system. Then, you need to follow the instruction which will display on your device’s screen. You have to enter the language as well as date and time.
Step 4
After proceeding the above-mentioned steps choose the repair option which will be shown on the bottom of your screen. After that, the Advanced option will launch to your screen.
Once you are done with the above-mentioned procedure, then you have to access the Advanced Startup Options. After that, you will be able to move on to the Startup setting option with the help of the following guidance:
Step 1
At first, click on the Troubleshoot option which will help you to locate it under the Continue button. After that, there will appear three several options such as: Refresh your PC, Reset your PC, and Advanced options. Then, you need to click on the Advanced option. If you want to refresh or reset your PC, then you must need the refreshing option which will keep you from your files but it uninstalls the programs you have to install.
Step 2
You will find the Startup Settings option under the Advanced options screen. That will help you to open the list of available startup option. Then, move on to the next step.
Step 3
When you are done with the above-mentioned, the option number 7 should be named Disable driver signature requirement. After that. You have to press the 7 numbered key from your keyboard. Or you can also use the F7 function key from your keyboard. Then, hit the Enter button and this will help you to went back to the Operating System.
Procedure 5: Access The Automatic Repair Functionality
With the help of various troubleshooter methods, you can easily fix any kind of trouble which is based on Windows-based PCs. If you failed to do the previous methods then, you should follow the method written below. To do it go through the steps.
- First, you need to choose any kind of methods from the previously mentioned part of this article after that, move on to the Advanced Startup Options menu.
- Then, click on the Troubleshoot option which you can find under the Continue button.
- After that, go to the advanced option which is located under the Advanced options screen. Then, click Automatic Repair option. This will help you to launch the Troubleshooter option.
- After that, you have to follow the on-screen instructions to finish the Automatic Repair and fix your computer.
Hope this article will help you resolve all the trouble which are related to Windows 10 error code 0xC0000428. If you have any queries about the topic, then you can drop a message on the below section. All the above-mentioned steps are very useful to fix the issue. If you failed to do that, then your Windows 10 PC needs to be repaired.
