Even though Windows 10 is one of the most compatible Operating Systems to work with, you might come across technical complications from time to time. One of such faults includes the blue screen error codes. When your device confronts a technical failure, it shuts down all of a sudden or restarts unexpectedly. You might even see an error message saying ‘Your device ran into a problem and needs a restart’. Additionally, when you try to upgrade your system to Windows 10, you might encounter blue screen errors. Fortunately, there are several methods to troubleshoot these errors from your system. The causes of BSOD or STOP errors can be many. However, the major factors include an outdated driver or incompatible software or hardware that you have recently configured. In order to eradicate these critical system faults, we will take you through a series of effective fixes that will resolve the issues promptly. Hence, stay connected to this article until the end and mitigate your woes.
“How to Fix Windows 10 Blue Screen Error Codes?” with Prompt Solutions
Blue screen error codes are common in Windows 10. You might run into a typical BSOD error particularly after an upgrade. Hence, it is your best bet to follow the guidelines which we have cited in this article to troubleshoot the errors in an instant. Though the steps might look a bit complicated at first, you need to apply them in the proper order which will get you back on the track.
Things to do When you Encounter BSOD Error Codes
Troubleshooting BSOD errors are simple if you follow the instructions carefully. A lot of times, you will run into typical blue screen issues while upgrading your OS to Windows 10. It might occur due to a third-party application such as security software or an antivirus. Incompatible hardware or software is also responsible for such errors. You can wipe out the glitch by performing the following actions.
Method 1: Uninstall the Unwanted Applications
An incompatible software or some third-party applications often result in blue screen errors. Hence, it is a wise decision to uninstall unnecessary applications or software that you no longer need. To do so, click on Settings and then open System. After that, you will find the option Apps and Features. Go ahead and select it. After that, click on the Uninstall option. Go through the on-screen instructions to remove the apps permanently. Repeat the same process for uninstalling incompatible software as well. After upgrading to the latest version of Windows 10, you can reinstall the apps again and check whether they are working well.
Remove the non-essential hardware
BSOD or STOP errors might crop up due to faulty hardware. While upgrading your OS to Windows 10, always remember to unplug the unnecessary peripherals including printers, external hard drives, phones etc., However, if you want, you can reconnect the hardware once the installation is complete. If you continue to struggle with the same issue, you may require to install the latest drivers.
If this method fails to eradicate the blue screen error codes, move ahead with the next solution.
Method 2: Perform a Clean Installation
Alternatively, you can keep away blue screen issues if you delete everything during an upgrade and start with a new copy of the OS. Here, you need to remember that performing a clean installation of Windows 10 will erase everything from your system. So, we recommend you to backup all your files and data before you perform this task. Before you begin with the process, you will require a product key in order to activate to Windows 10. However, while upgrading to a recent version of Windows 10, you can skip the product key as well. The OS will automatically reactivate it after the upgrade.
If you boot via a USB flash drive, you must configure the BIOS of your system. This may vary depending on your device. Therefore, make it a point to check the manufacturer’s website for further instructions. To perform a clean installation, execute the following steps:
- At first, restart your system with the bootable USB media installation.
- Click on Next and subsequently on the Install Now option.
- In the next step, you need to select the option ‘I don’t have a product key’ link.
- Now, check the option ‘I accept the license term’ option and then click on Next.
- Lastly, select the particular OS which you want to install. Follow the instructions accordingly in order to complete the installation.
Once you have completed the steps successfully, proceed to reinstall the applications again and restore all your data and files.
Method 3: Disable the Automatic Restart
In most of the cases, Windows 10 is configured to restart automatically as soon as the BSOD error occurs. At that moment, you don’t get sufficient time to note down the error codes pertaining to BSOD. Therefore, to initiate the process of fixing Windows 10 blue screen error codes, hold the STOP error screen for a few minutes. Here’s how to do:
- Firstly, click on This PC option and go to the Properties section.
- On the left side, you will find the option Advanced System Settings. Click on that.
- Now, under the Startup and Recovery tab, click on Settings.
- Once you are done, go to System Failure tab and untick the checkbox displaying Automatic Restart.
- Finally, click on OK to save the changes.
Hopefully, the methods are sufficient to resolve blue screen error codes from further occurrence. However, if this solution fails, don’t worry. We have suggested other alternatives as well which you can try.
Method 4: Update the Firmware and Hardware Drivers
This is one of the major causes to encounter BSOD errors. Often, faulty drivers on your system are the major culprits behind blue screen errors. Therefore, it is a wise choice to update and repair them to get rid of BSOD errors. Also, you should keep the firmware of your system up-to-date to its latest version. Cross-check whether the hardware components are overheated. If too much dust accumulates on the fan, the hardware gets heated up and this eventually results in blue screen issues.
This method is a feasible solution to help you troubleshoot STOP errors easily. You can also try the next option if you find it suitable.
Method 5: Boot in Safe Mode
Safe Mode is a good option to detect the cause of various issues that exist in your system. Blue screen of death is not an exception in this regard. You can easily fix the glitches in Windows 10 using the Safe Mode. Want to know how to use Safe Mode in Windows? Here are the steps:
- At first, go to Settings and you will find the Update and Recovery option. Then click on Recovery.
- In the next step, under the Advanced startup tab, click on the option Restart Now. Here, wait for the screen to appear in front of you.
- Now, click on the option Troubleshoot. On the next screen, you will find the Startup settings.
- Lastly, click on Restart to boot in Safe Mode.
Hope the last fix finds you well. You can try on your own and this will definitely resolve your doubts regarding blue screen errors.
Wrapping up
Confronting a BSOD error on Windows 10 can be frustrating at times, especially in the middle of important work. Blue screen error codes also occur due to a faulty graphics driver or an interruption in the connection of your display. However, you can follow this guide where you will find appropriate solutions to prevent blue screen errors from further occurrence. If you are still unable to resolve the problem, note the error messages and post your comments. We will be able to offer suitable workarounds to mitigate your glitches. We will love to hear from you.
