Ntoskrnl.exe BSOD error is one of the most well-known Blue Screen of Death errors. This is actually caused by the ntoskrnl.exe. The most common causes are corrupted and overlocking drivers, memory hardware. In addition, there can also be a RAM issue that is making the system unstable. Sometimes, outdated Windows can be the main culprit for this annoying trouble. In this article, we will show you how to get rid of this error in Windows 10. We will provide some efficient and headache-free way to mitigate this problem. So, follow the methods one-by-one and perform these on your computer to remove this particular situation.
Possible Alerts for Ntoskrnl.exe BSOD Error
This error pop-up with an error message that says:
`Windows could not start because the following file is missing or corrupt’
Before getting this error, you need to check the symptoms mentioned below:
- High CPU Usage and overheating.
- Slow performance.
- Sudden BSOD problem.
- Finally, Getting the following message during boot up: ‘/system32/ntoskrnl.exe file is missing’
Major Causes behind the ntoskrnl.exe BSOD Error
There are some significant reasons that are the main thing for what you might face the ntoskrnl.exe BSOD Windows 10 issue. So, get a close look at the following causes which are responsible for the error:
- Corrupted memory
- Damaged exe file
- BSOD issue
- Clocking drivers
- CPU issue
- Corrupt boot volume that may appear due to a sudden power cut, unsafe shutdown, physical disk damage or corruption.
- An outdated version of Windows
- Virus infection
- Invalid boot.ini configuration
Effective Fixes for Ntoskrnl.exe BSOD Windows 10 Issue
In this section, you will get the effective hacks which give you different steps that help to get rid of this problem:
Way 1: Run Windows Memory Diagnostic
If a faulty RAM can be the main culprit of this issue, the first thing is to run the Windows memory diagnostic in a proper way. So, you need to follow the below steps mentioned below:
- First of all, press the Windows key and R button together.
- Then, type ‘Memory’ in the Run dialog box.
- Choose ‘Windows Memory Diagnostic’.
- When a set of options shows up on the screen, click on the ‘Restart Now’ option.
- After that, Windows will reboot automatically and look for the RAM errors.
- Lastly, check if the issue is removed or not.
- After completing this process, if RAM has issues till now, then you can replace it.
Way 2: Run Memtest86
After running the Windows Memory Diagnostic tool, you need to run Memtest89. To perform this, follow this way:
- Firstly, make a connection with a USB drive to the system.
- Then, download Windows Memtest86 Auto-installer for USB Key.
- Now, click on the image file and choose ‘Extract here’.
- After that, go to the folder and run the Memtest86+ USB Installer.
- Next, plug in the USB drive to format the USB drive.
- Now, connect the USB with your device.
- Reboot the system and check if the boot from the USB flash drive is selected or not.
- Then, Memtest86 will start testing to do memory corruption in your computer.
Way 3: Update Realtek Audio Driver using Device Manager
You can fix this issue by updating the Realtek audio driver. To do that, just follow the below guidelines on by one and apply them in your own way:
- First, click and hold the Windows logo key and R button to use the Run dialog box.
- Then, ‘Devmgmt.msc’ there and hit the Enter button.
- When open Device Manager, go to the ‘Sound, video and game controllers’ option.
- Now, select Realtek High Definition Audio option and click on Update Driver.
- In the new Window, choose ’Search automatically for updated driver software’.
- Wait for a couple of seconds to check the Update option and select ‘Install’.
- After completing it, press ‘Close’ and restart your device again.
- If all the drivers are updated, a message like “The best driver software for your device is already installed“ is displays. Then, click on Close to save all changes.
If the issue still appears, then you have to update the driver manually. So, note down the steps mentioned below:
- Open Device Manager and select Realtek High Definition Audio.
- After that, choose Update Driver.
- Now, click on the ‘Browse my computer for driver software’ option and select ‘Let me pick from a list of available drivers on my computer’.
- Next, choose the drivers from the given list and hit the Next option.
- After completing it, restart your computer.
Way 4: Reset Overclocking Settings
Another way is to reset the overclocking settings because the overlocking drivers can cause this issue. So, follow the instructions given below:
- Firstly, tap the Power key for a few seconds.
- When the device is closed, then switch on the system.
- Now, press the F1, F2, F10, ESC or Delete button from the keyboard.
- After that, click on ‘Exit’ and select ‘Load Setup Defaults’.
- Next, hit the Enter button and click on the ‘Yes’ option.
- Again press the Enter key.
- When the Exit Saving Changes option displays, click on the Enter key to make all changes.
Way 5: Uninstall the latest Update
if it fails to get installed or contains corrupted system files, you can uninstall the recent updates To do this, just go through these directions as instructed below:
- At first, press the Windows key and I key combination to invoke Settings.
- Next, select the ‘Update & Security’ option, and then click on ‘Advanced Options’.
- After that, choose ‘View your update history’ and select the Uninstall Updates link.
- Now, the list of the updates will automatically open in the Control Panel section. Then, choose the update option which you want to remove.
- Click on the Uninstall option and inspect whether the problem still appears or not
- If you still face this issue, then move to the other methods.
Way 6: Make sure Windows is up to date
After uninstalling Windows version, if you are still not able to update the Windows version, then you can try to update it manually. Therefore, you need to follow the directions below:
- Firstly, go to the Search box.
- Then, type ‘Windows Update’ in it.
- Now, choose the Windows Update Settings and select the ‘View Update History’ option.
- Next, look for a Windows update which previously failed to install.
- To get more information, click on this update.
- After that, navigate the Microsoft download center.
- Now, type the KB article number to find the update package which failed before.
- Download the package and install this on your device.
- Finally, check if the issue is fixed or not.
Way 7: Reset the BIOS Settings to Default
Usually, BIOS means Basic Input Output System. The main objective of BIOS is that it identifies and troubleshoot all the hardware issue of your PC. If the BIOS is not updated properly, then it might cause this error. Therefore, you have to modify the settings or update the BIOS to get rid of this issue. It is very easy to update the BIOS, but you must be careful when you have updated this. Because, if you commit a mistake or an error occurs, you can lose all the valuable data. So, we have a recommendation, that always stores your data first, then update it. To update the BIOS, you have to maintain these following steps:
- First of all, open the Official website and find out your device name there.
- Then, navigate the ‘Drivers and Softwares’ option and by expanding this you will find BIOS/UEFI.
- To see the update for the BIOS with the system, press the eyes shaped button and download the latest version of it.
- Next, open the ‘.exe’ file and follow the directions to update the BIOS.
- Reboot the computer and check if the ntoskrnl exe blue screen error still appears or not. If the problem is still annoying you, just proceed through the next method.
Way 8: Check the Drives for Errors
If none of the above methods fails to resolve this error, the hard drives can create this situation. So, you need to eradicate this error completely by checking the drives for errors manually. Here is a way to do it:
- At first, go to the Drive section and click on the ‘Properties’ option.
- Then, select Tools.
- Now, choose ‘Check’ and wait for a while.
- If any error appears on the screen, then you need to fix them.
- At last, check the drives and verify if the issue gets struck or not. If not, use the next method.
Way 9: Run the DISM Tool
You can solve the error by running=ng the DSM tool. So, read the following points carefully and apply them:
- Firstly, press the Windows logo key and the R key on the keyboard together.
- When the Run dialog box appears on the screen, type ‘cmd’ or tap on the Shift, Ctrl and Enter key combination.
- After that, run the Command Prompt section as an Administrator.
- If you will be asked for permission, then press the YES button to run it.
- Now, type the Command and press the Enter key.
“Dism /Online /Cleanup-Image /ScanHealth”
- Write “Dism /Online /Cleanup-Image /CheckHealth” and hit the Enter key.
- After completing it, type this command:
“Dism /Online /Cleanup-Image /RestoreHealth”.
- Wait for a few seconds and close the Command Prompt. Now, check if the error message still occurs or not.
Way 10: Run the System File Checker
Generally, the SFC scan helps to replace or repair the corrupted files. If you notice the corrupted files is the main reasons behind the ntoskrnl.exe error, then it’s worth a try. Therefore, you need to perform the SFC scan by applying these steps one by one:
- Firstly, right-click on the Start menu and go to the Command Prompt section.
- In the Command Prompt Window, write ‘sfc/scannow’.
- Press the Enter key from the keyboard and the SFC scan will scan your device automatically.
- Make sure that don’t cancel the scanning process until it finishes completely.
- After scanning, if it will show the corrupted files of the system, then type this following command:
“findstr /c:”[SR]” %windir%\Logs\CBS\CBS.log >”%userprofile%\Desktop\sfcdetails.txt.”
- Next, press the Enter key. If you want to skip this, then just type the following command,
“Dism /Online /Cleanup-Image /RestoreHealth”.
- You can find the details of the SFC scan on the sfcdetails.txt file that will appear on the screen.
Way 11: Perform System Restore
Another method is System restore to fix this issue quickly. So, you need to follow these steps given below:
- First of all, go to the search bar and type ‘Create a Restore point’.
- Now, select the item which will pop up on the screen.
- Next, choose the ‘System Protection’ option, and tap on the ‘System Restore’ option.
- Select the ‘Next’ option.
- When you see a list of all the available restore points, choose the most recent restore point.
- Then, select the Next option again and press the Finish option.
- Wait for sometimes to finish this process completely.
Way 12: Disable Runtime Broker
You can resolve the glitches on the system, then try to turn off the runtime broker. So, follow the steps below:
- At first, click on the Start menu and select ‘Settings’.
- Then, go to the System option.
- Now, select ‘Notification and Actions’.
- Next, uncheck the ‘Show me tips about Windows’ or ‘Get tips, tricks and suggestions as you use Windows’ option.
- Finally, reboot the device and check the issue once.
Way 13: Install the Missing USB Driver
The last resort is to install the missing USB driver in an accurate way. So, follow the below guidelines:
- At first, tap and hold Windows key + R and open Run command.
- Then, type “devmgmt.msc” and hit Enter.
- In the devices list, go to the Universal Serial Bus controllers option and check whether there is an exclamation mark or not.
- When you remove the faulty USB host controller, you need to press the Shift button to restart your computer in Safe Mode.
- After restarting your PC, go to the PC/laptop manufacturer’s website.
- Next, search for the USB driver and use the installer to copy the missing driver.
- Now, restart your PC again.
- In the end, check if the issue persists or not.
Take a Note
We hope that the above solutions are efficient to eradicate the ntoskrnl.exe BSOD error on your device. After doing this, if you are still facing this issue, then you can put your feedback in the following section.