Type to search

Learn Every Aspect To Solve The Directory Name Is Invalid Issue

Get All The Errors Solved with ErrorCode0x, Call Us Now :

Learn Every Aspect To Solve The Directory Name Is Invalid Issue

The directory name is invalid issue can occur on any PC and block your PC from launching any certain files or directories. This error normally occurs when the directory names are invalid messages. Every time you enter it, an error code with the message “Invalid directory name” appears on the DVD or CD and loads. Many Windows 10 users report that this problem mainly occurs after reinstallation of Windows 10. This problem might be caused by one of the DVD drives connected to a dusty SATA port and suffocating for problems installing a DVD drive computer. If you are using an older version of the Operating System, then also you can see this error message on your computer. If you are also suffering from this similar issue, then go through these guidelines. Here, in this guideline, you will see the most effective solutions that you can use to resolve this problem on Windows 10 system.

Effective Solutions to Resolve the Directory Name Is Invalid Issue:

When you see this issue on the system, you need to reboot the system. Sometimes, rebooting the system can fix the various problems that you have faced. So, at first, you should reboot the system and then check whether the error message appears or not. If it shows up again, then you need to follow the under-mentioned solutions to resolve the directory name is invalid issue on the Windows 10 system.

Solution 1- Turn Off the DVD Drive Driver and Turn It On Again

When the directory name is invalid Windows 10 issue appears on the screen, you need to disable the DVD drive driver and again enable it. To do that, follow the steps given below:

Step 1

At first, you need to press the Windows Key and along with the R button launch the Run dialog box. In the Run window, type Device Manager and then click on the Ok button or hit the Enter button. Alternatively, you can right-click on the Start button to open the WinX menu list and choose the Device Manager application.

Step 2

In the Device Manager application, you can move the cursor to the Display Adapter. Select it and then click on the DVD/CD-ROM drives tab to expand it. After that, right-click on the DVD and select the Properties option.

Step 3

In the Properties section, you have to take the mouse to the Driver section and select the Disable option to turn it off. Once it is turned off again enable it. After turning it off, wait for sometimes and then click on the Enable option to turn it on. After doing this, you should select the OK button to save it. Once it is done, reboot the system and then check whether the issue is still present or not. In case, if you still see this error, then you can move on to the next solution.  

Solution 2 – Remove the DVD Drive and Install It Again

Another solution that we have provided to resolve the directory name is invalid problem on the system is by reinstalling the DVD drive. To do that, follow the steps cited below:

Step 1

Firstly, you need to press the Windows key + X button to launch the Menu list and select the Device Manager. Alternatively, you can type the Device Manager in the Search Panel and then hit the Enter button to open it.

Step 2

When the Device Manager window opens, find the DVD drive from the DVD/CD-ROM drives tab which is located at the left side panel. After that, right-click on it and open the list. Then, select the Uninstall button to remove it.

Step 3

After removing this, again install it from the official website. So, you need to go to the official website and download it. Once the download gets completed, double click on the download file and install it. Read the onscreen instructions carefully to finish the installation process. After completing this, restart the machine and then check whether the DVD works perfectly without any error message.

Solution 3 – Update the BIOS

If the BIOS is not up-to-date, then this error message appears on the system’s screen. So, you should update the BIOS on your PC. To update the BIOS, follow the directions carefully:

Step 1

Firstly, you can press the Windows Home button to launch the Menu list and click on the Search box. In the Search box, type Run and press the Enter button to open the Run window. When the Run window opens, type msinfo and press the Enter button or click on the OK button.

Step 2

When the System Information window opens, scroll down the page. After that, you need to find the BIOS and select it. If you see the BIOS has not updated, then go to the official website and download it. After downloading this, you should install it on the system. Once the installation process gets finished, you have to reboot the machine and check whether the problem is fixed or not.

Solution 4 – Remove the Third-Party Software

By removing the third-party software, you can also get rid of the directory name is invalid issue on the Windows 10 system. Following the steps which are mentioned below you can easily resolve this issue:

Step 1

Press the Windows button + I key to launch the Settings application. Alternatively, you should hold the Windows button and at the same time, press the X key to open the Menu list. Now, choose the Settings application from there.

Step 2

When the Settings application opens, you should move the cursor to the Apps and Features section. Next, double click on it to open that tab. In that tab, you have to find the Third-Party software and select it. After that, you can select the Uninstall option to remove it. Once the uninstallation process gets completed, reboot your computer.

Solution 5 – Use Different SATA Port

If this error message occurs due to the problem with the SATA port attached to your DVD, then firstly you have to check whether the SATA port is properly worked or not. If not, then you can connect it to another port. Further, check whether the error message still appears or not. If it shows up, then you can use another solution.

Solution 6 – Reinstall the Audio Driver

By reinstalling the Audio driver, you can fix the directory name is invalid issue. Go through the steps mentioned hereunder:

Step 1

To open the Device Manager, you need to type Device Manager in the Search box and then hit the Enter button. Alternatively, you must hold down the Windows key and press the X key together to launch the list. From there, select the Device Manager application.

Step 2

In the Device Manager window, you need to navigate to the Audio driver, right-click on it. From that list, you can select the Uninstall option.

Step 3

After uninstalling this, you should select the Scan for hardware changes icon. Now the system will scan the system and automatically install the driver.

Solution 7 – Check Disk Errors

The window comes with Disk Check built-in tool. With the help of this tool, you can quickly eliminate the directory name is invalid problem. Follow the steps cited below:

Step 1

In the beginning, you need to press the Windows button and at the same time, press the E key to open the File Explorer window.

Step 2

In the File Explorer window, go to the This PC, select it. After that, you have to right-click on the Local Disk to open the list and select the Properties button.

Step 3

When the Properties window opens, you should move the cursor to the Tools section, select it. From that tab, you can see an option Check, click on it. Then, click on the Scan Drive option. To finish this process, follow the onscreen directions carefully. After completing the scanning process, restart the system and then check whether the problem is removed or not.

Solution 8 – Remove All the Portable Devices

You can easily resolve the directory name is invalid Windows 10 issue by removing all the portable devices from your computer. To do that, follow the directions as per the instruction:

Step 1

Firstly, you can press the Win + X keys to open the Menu list and then you can choose the Device Manager. Alternatively, you need to press the Windows button and R key together to open the Run dialog box. Type devmgmt.msc and press the Enter button or click on the OK option.

Step 2

When the Device Manager application opens, you need to go to the View option which is located at the top of the page. After that, you can select the Show hidden devices option.

Step 3

Next, you can navigate to the Portable Devices and expand it. After that, you can right-click on all the Portable devices and click on the Uninstall button. After doing this, you should restart the system and then check if it works properly.

Solution 9 – By Changing the Drive Letter

If the previous solutions do not help you to get rid of the directory name is invalid issue, then try this solution to fix this issue on your PC. Sometimes, changing the drive letter can solve the issue that you have encountered. If you do not know these steps, then follow the under mentioned steps:

Step 1

You have to hold down the Windows key and the X button to open the list. From that list, you can select the Disk Management application.

Step 2

In the Disk Management window, you will locate the CD/DVD drive. Right-click on it to open the list. After that, you can choose Change Drive Letter and Paths option.

Step 3

In the next window, you need to click on the Change option. Then, you can select any other Driver Letter and click on the OK button.

Solution 10 – Turn Off User Account Control

By disabling the user account control feature, you can easily eliminate this error message on the system. Following these steps, you can do it:

Step 1

Firstly, you have to open the Control Panel application by typing the Control Panel on the Search box and then hit the Enter button. Alternatively, you can get that by pressing the Windows button and X key together to open the list and select the Control Panel.

Step 2

When the Control Panel application opens, you should go to the User Accounts section. In the User Accounts window, you need to select the Change User Account Control settings option.

Step 3

In the Settings window, you have to move the slider to the way down. After that, you can select the OK button to save the changes. After changing this, you must restart your computer.

Solution 11 – Perform the System Restore

You can fix this issue by performing the System Restore. To do that, follow the steps which are mentioned below:

Step 1

To open the Search box, you need to press the Windows key and S button on the keyboard. In the Search box, type System Restore and hit the Enter button.

Step 2

In the System Properties window, you need to move the cursor to the System Protection tab. Next, you can see an option System Restore, click on it.

Step 3

In the next window, you can see the Next button, click on it. After that, you can select the restore point that you want and then click on the Next option. After doing this, you need to read the onscreen instructions carefully to complete this process. Once it completes, restart your computer and check whether the error does not show up on the system’s screen.

We hope that the above-mentioned solutions will definitely work out to resolve the directory name is invalid issue on the system. Follow them one-by-one and solve this issue immediately on your computer. After performing all these steps, if the issue still persists, you can seek help from an experienced expert.