Type to search

Linksys Router WRT110 Setup [Comprehensive Guidance]

The Linksys WRT110 router is preferred as one of the most popular routers as it offers WiFi connectivity. Once you purchase a  Linksys router, then all you have to do is to perform Linksys router WRT110 setup. With the help of which, you will be able to allow it to connect various devices to your router, such as wireless printers, smart televisions, and WiFi enabled smartphones. If you are unaware of this process, then try to follow this article to the end. It consists of guidance to perform this action on your own.

Linksys Router WRT110 Setup: Easy Steps

In order to set up your Linksys router, you have to perform several steps, which are provided in this section.

Step 1: Login to the Linksys WRT110

In order to start the configuration process, all you need is to log in to your router. If you are already logged in, then you can skip this step. If you are not connected, then try to login to the router using the steps mentioned below.

  1. At first, open the web browser and type the IP address of the router which is
  2. Now, hit Enter to continue.
  3. You will be able to see a login page.
  4. Here, enter username and password “Admin”.
  5. If you have already logged in, then skip this step.

Step 2: Find the Wifi Settings

Once you login to your router, you will be able to go to the setup page. In order to set up the WiFi on your router, tap on the option which is situated at the top of the page named Wireless. Now, go to the Basic Wireless Settings tab.

Step 3: Change the WiFi Settings on the Linksys WRT110

Once you enter to the WiFi Settings page, you have to choose from Manual and Wi-Fi Protected Setup. In this case, if you choose Wi-Fi Protected Setup, then, it will take you to a page which deals with the WPS. But in this case, don’t try to use WPS, because it is easy to hack it.

Here, if you tick the radio button named manual, then it will take you to another page. There are more than one changes you have to make on this page to establish a secure WiFi network. Here, the first one is the network SSID. Once done, you have to create an original name of the network.  But in this case, try to avoid providing personal information.

Step 4:

Once done, you have to set the radio band to the auto- 20/40MHz Channel. Here, try to change the wide channel to channel 6 and the standard channel to the 1 or 11. Once done, tap on the blue button to apply the changes. Now, get back to the top of the page and tap on the option which is Wireless Security.

Step 5:

After that, you will be taken to another page. Here, using the security drop-down list, you have to choose WPA2 Personal which is the best option for the home network. In the encryption mode, you have to choose AES.

Step 6: Provide Password

The last thing which you have to do is provide the password. This is the password which you have to provide while trying to access the network every time. This password will be a minimum of 14 to 20 characters. In this case, you can use numbers, symbols, and letters, both capital, and lowercase, for better security.

Once done, tap on the option named Save to save the changes.

To conclude

Here, we have provided a step by step guide using which you will be able to set up your router on your own. In order to perform the procedure, try to perform each and every step carefully. It is recommended not to jump any one of them.

Otherwise, you won’t be able to resolve this particular matter on your own. If you found this article helpful, then try to leave a comment in the comment section. If you are facing any glitches while performing the steps, then leave a comment in the comment section.