Type to search

Fix HP Printer Not Printing Black With Some Amazing Hacks

Despite the unmatched features of HP printers, some errors are bound to occur. HP printer not printing black is one of the most annoying errors that users are encountering. This problem occurs for a number of reasons such as clogged printheads, ink cartridge issues, etc. Therefore, the error requires appropriate attention or else, it can hamper your printing task as well. It is quite obvious, that you might not be aware of the exact procedure for resolving the issue if you are not a tech-savvy person. Hence, instead of worrying too much, take help from this article. Here, we are going to discuss all the probable solutions and methods that will make your task much easier.

Apply Useful Steps To Fix HP Printer Won’t Print Black

You might come across HP printer black ink not working that can hamper your work as well as experience. It adversely affects the printing quality and results in errors such as faded printouts, documents with blurred and fuzzy texts, etc. At times, this error even results in restricting the printing job as well. Therefore, it is always wise to take preventive measures as soon as you encounter the issue. Please follow the instructions that are given below:

Solution 1: Clean The Cartridges

One of the most effective ways to fix this error is to clean the cartridges carefully. To clean the ink cartridge, you will require a cotton swab in order to wipe away any dirt or dried ink that is stuck in the print header. Also, clean the printer heads.

Solution 2: Replace The Low-Ink Cartridges

There are situations, where the users install a new black ink cartridge but forget to remove or replace the protective plastic tape. Therefore, you have to check the ink levels and then remove the black ink cartridges thereby peeling off the protective tape.

Solution 3: Check The Ink Level Of Black Ink Cartridges

In order to check the ink level of the black ink cartridge, at first, you have to go to the “control panel” on your HP printer. Then, head over to the “Ink Levels” option. There, you can check the ink level, which may differ from model to model. So, verify the documentation supplied with the printer.

Solution 4: Allow Automatic Servicing To Complete

Many problems occur with black ink, especially with the quality of the print such as poor black text or other related issues. Therefore, if the printer’s automatic servicing routine is not finished, it might cause a problem.

Solution 5: Check The Paper

The paper quality can also affect the print job. Therefore, do the following:

  1. Load the paper print-side down in the input tray.
  2. Do not use wrinkled or curled papers.
  3. Use the correct paper type for your project.
  4. Store photo paper in its original packaging inside a resealable plastic bag.
  5. Try using a different paper.

Solution 6: Perform Print Cartridge Alignment

  1. First of all, load the correct type of paper.
  2. On the Control Panel of the HP printer, hit “Setup”.
  3. To choose “Tools,” click on “Down arrow”, and then hit the “OK” button.
  4. Again, to choose “Align Print Cartridges,” hit the “Down arrow”, and then click on the “OK” button.
  5. Soon, your HP printer will calibrate, align the print head and print an alignment page.

Solution 7: Replace The Problematic Ink Cartridge

In case you encounter a problem with the ink cartridge, then the best decision is to replace the cartridge that is creating the problem. Else, it can cause serious issues with your print quality and can even cause damage to the device as well.

The above-mentioned steps and methods will help you eliminate the error, thereby making your HP printer running smoothly. But in case you are facing any trouble or confusion with the steps, please do post comments below.