Quick And Easy Fixes For The Error HP Printer Installation Failed Windows 7

At the time of installing the HP printer, many of the users often face numerous problems. And HP printer installation failed Windows 7 is one of those annoying situations that you can also face. If you are already in such a condition and this problem is preventing you to perform your usual works sa you wish, then this article can be the best bet for you to resolve the issue. You just need to follow the upcoming methods carefully. So, let’s start with the process.

Amazing Processes To Fix the Problem HP Printer Installation Failed Windows 7:

Here, in this part of the article, we will explain some easy and quick methods that will help you to get rid of the situation without any hassle:

Method 1: Troubleshoot the USB connection

To resolve the problem, first of all, you have to troubleshoot the USB connection. And here are a few steps that will help you to check the USB cable and connection.

Step 1: Make sure the USB cable is HP compatible

Here, in this step, you have to check whether the USB cable is compatible for HP or not. It is important for you to know that HP supports USB cables less than 3 meters (9 feet 10 inches) in length. In this situation, you have to replace the USB cable with a supported cable  If the USB cable is longer than 3 meters (9 feet 10 inches).

Step 2: Make sure that the USB Cable is correctly connected to the printer

It is really important to make sure that the USB cable is connected to the product in the correct way.

• Make sure that when you are connecting the cable, then the icon on the USB cable usually faces up.
• On the back of the product, you need to insert the small end of the USB cable completely into the USB port.
• If there is any problem with the connection, you can disconnect the USB cable, and then reconnect it properly. Make sure that the Plug and Play installation is starting automatically.

There is no need to continue the troubleshooting, if these steps resolved the issue. If the above steps fail to resolve the issue and if the issue is still persisting, then go to the next step.

Step 3: Make sure that the USB Cable is correctly connected to the computer

In this step, you have to ensure that the long, flat end of the USB cable that connects to the USB port on the computer in only one direction, is connected to your computer device in a proper manner.

1. To ensure that you have to insert the long, flat end of the USB cable into the USB port on the computer marked with the USB icon completely.
2. If you face any problem with that you have to disconnect the USB cable, and then correctly connect it again. Like the previous step in this one also you have to make sure that the Plug and Play installation is starting automatically.

After performing the above steps check if these steps resolved the issue or not. If the issue is still there, then go to the next step and try to troubleshoot the problem.

Step 4: Test the USB Port

If there is no problem with the USB, then the issue might be with the USB port, the USB hub, or the laptop docking station. And to resolve the problem with these things you need to follow the next steps:

You have to test the USB port on the computer if the USB cable connects directly to the computer.

If the USB doesn’t, you should use Option two and check that if the USB cable connects to a USB hub or a laptop docking station.

You have to connect the cable to another available USB port on the computer to resolve the problem. Suppose, if the USB cable plugs into the front port of the computer, then you need to disconnect the cable, and then plug it into a port on the back of the computer.

If you still find that the issue persists on your computer device then follow the next step.

Method 2: Remove the Problematic Driver

To help the Operating System to communicate with the device you need to install drivers in the hardware component. Most of the time, because of compatibility problems,  or a problem during the installation or installing an unsuitable and outdated driver the error HP printer installation failed Windows 7 can occur. You need to remove the driver to fix the issue as the failed driver installation can cause problems with the printer and it can also prevent the installation of the correct drivers. And to do so, follow the upcoming steps and resolve the HP printer installation failed issue in minutes.

Step 1:

To start the process, first of all, you have to remove the printer cable from the back of your computer device after turning off your printer device.

Step 2:

And then you have to go to the Control Panel. To do so, open the start menu and hit the ‘Control Panel. After that, there, you will find the option ‘View devices and printers’ under the ‘Hardware and Sound’ section, click it. And then, you need to hit the option ‘Devices and Printers’ that you will find in the classic Control Panel.

Step 3:

Here you have to find and locate the problematic printer installation that you will be able to find under the ‘Printers and Faxes’ section. Now click ‘Remove device’ after right-clicking the printer. After the action along with the failed driver installation, Windows will remove the device.

Step 4:

And now it is important to uninstall any additional software associated with the printer to resolve the problem permanently. For that, you have to return to the Control Panel and then hit the click ‘Uninstall a program, that you will find under the ‘Programs’ section. In case, if you are using the classic view, then you have to click on the icon ‘Programs and Features.’ And after that, to complete the uninstallation of additional drivers or software you should scroll down the list of installed programs. And then complete the task of uninstallation of the additional drivers or software associated with the failed printer installation. To do so,  right-click the program you want to uninstall and then hit the option ‘Uninstall/Change.’

Step 5:

Once you are done, reboot your computer device and make sure that you reinstall the printer for your version of Windows with the most recent drivers.

Hope that the above methods will help you to get rid of the situation with ease and you will be able to resolve the error HP printer installation failed windows 7 yourself. If you want to enlighten us with your views regarding this article, then without any hesitation you can comment on this article.