Troubleshoot And Fix Error 0x80073701 With Amazing Tips And Tricks In An Instant

According to many users, the Windows Update issues are probably one of the worst problems to deal with on a regular basis. The Windows Update issues are often quite difficult to resolve and different update error codes have different cause and solution. Hence, one of such Windows Update errors is the error 0x80073701. This Windows Update occurs when you try to perform a Windows Operating System update process. The update stops in the middle and then displays the error 0x80073701.

Therefore, if you are fed up of this Windows Update issue and want some best fixes, then you are on the right page. Here, in this article, you will learn the best methods that will help you to get the job done. Therefore, you need to stick to this article till the end. But before, we start off with the fixing process, it is important to know the reasons that lead to the occurrence of this Windows Update error 0x80073701.

Get to Know the Common Causes of the Windows Error 0x80073701:

Now, in the first place, we will discuss the causes that can lead to the Windows error issue. With the help of the causes, you can easily resolve the Windows Update issue. Therefore, the causes of the error 0x80073701 are discussed below:

1. The most common cause of this Windows error code is due to the corrupt Windows Registry files of the system.
2. If in case, your system is being attacked by a virus or malware, then also you can get the Windows Update error code.
3. If there are software or hardware incompatibilities, then also you can receive the Windows Update issue.
4. Any incomplete installed previous updates of the Windows Operating System can also lead to the error 0x80073701.
5. The Microsoft servers can be down which then results in the occurrence of the Windows error code.

Therefore, these were some of the causes that lead to Windows error. However, there can be more causes of this Windows error 0x80073701. Hence now you can follow the next section of the article, to know what happens to the system when this Windows error code occurs.

Problems Related to the Windows Error 0x80073701:

Unfortunately, this particular Windows Update error code comes in with these issues:

1. The performance of your system may become slow and sluggish with no response to any of your input.
2. Your system may also shut down without any notice.
3. Also, your system may restart itself without any of your action.
4. The Blue Screen Of Death (BSOD) may also occur.
5. There also might be some data loss.

So these were some of the issues associated with the error code 0x80073701 Windows 10. Therefore, now we will start to discuss some of the methods to fix this Windows Update issue on your own.

Effective Hacks that will Resolve the Error 0x80073701 Windows 10:

Here, in this section of the article, we will get the methods that will resolve your Windows Update issue in no time. Therefore, it is best to follow each and every step in order to get the best resolving results. Hence, have a look at the section below to get the methods to fix the Windows Update issue:

Method 1: Use the Inbuilt Windows Update Troubleshooter Tool

In the first method of the fixing process, you will have to use the Windows Update Troubleshooter in order to fix the Windows Update issue. If in case, you are unaware of the steps of this fixing process, then no need to worry. You can follow the section below to get the steps to perform this process:

• In the first step, open the Start menu by clicking on the Windows logo icon on the taskbar.
• Now, inside the search bar, type Troubleshoot and then, click on the Troubleshoot option form the list of results.
• This action will open up the Troubleshoot window of the Settings app.
• After that, select the Windows Update option. Then, you have to click on the Run the troubleshooter button to open the Troubleshoot processing window.
• When the Troubleshooter provides some resolutions, click on the Apply this fix button to continue the process.
• Now, you have to wait for the Windows Update Troubleshooter to complete its task. When the task finishes, you can now check if the Windows Update error code  0x80073701 is resolved or not.

Therefore, these are the steps that you can follow to perform the Windows Update Troubleshooting process. We hope that you were able to fix the issue. However, if in case, the Windows Update issue still troubles you, then try to apply the next method of the fixing process.

Method 2: Try to Run the Deployment Image Servicing and System Files Scans

In the next method, you will get the steps to run the Deployment Image Servicing and System Files Scans processes. Therefore, if you want to know the steps of this process, then you can follow the next section given below:

• Again, in the first step, open the Start menu on the taskbar. Now, you have to type Command Prompt in the search bar of the Start menu.
• From the results, you have to right-click on the Command Prompt option.
• Now, select the Run as Administrator option from the popup list of options.
• This action will open up the black Command Prompt window with a blinking cursor.
• Now, you have to first run the Deployment Image Servicing and Management utility. You have to enter the following command which is this: DISM.exe /Online /Cleanup-image /Restorehealth.
• After entering the command, hit the Enter key from your keyboard.
• Now, you have to type sfc/ scannow command in the command line and again press the Enter key from the keyboard.
• You have to wait for the commands to execute and then reboot your system.
• When the system restarts, check if the Windows Update issue still persists or not.

After following these steps, you will definitely resolve the Windows error 0x80073701. However, if the Windows update issue still follows, then you can have a look at the next method given in the later section of the article.

Method 3: Try to Restart the Windows Update Service

Resetting the Windows update service might help you to resolve most of the Windows update issues. Hence, you can also try to perform this method. However, if you do not know the steps, then you can follow the steps that are given below:

• First of all, press and hold down the Windows logo key and the R key of your keyboard at the same time.
• This action will help you to open up the Run dialog box. Now, you have to type services inside the command box of the Run dialog box.
• After that, click on the OK button in order to open the Services window.
• Now, you have to scroll down to find the Windows Update option. After finding the Windows Update option, double-click on it.
• This action will open the Windows Update Properties window.
• In the next step, click on the Stop button. After that, click on the OK button to save the changes and close the window.
• Then, again you have to right-click on the Windows Update option and click on the Start button to restart the Windows Update service.
• Now restart your system to check if the Windows Update issue occurs again or not.

So this is how you can restart the Windows Update service so that the Windows issue can be resolved. If the Windows update issue is resolved, then you are good to go. However, if in case, you are still getting the Windows update error code 0x80073701, then don’t worry. You can follow the next method below to get the Windows error code fixed.

Method 4: Reset Windows Update Components

If restarting the Windows Update service provides no solution for the Windows error code, then you can reset the Windows Update components. Resetting the Windows Update components will help you to restore the settings to their default values. Therefore, you can reset the Windows Update Components by following the steps that are given below:

• In the first step, you have to open “Command Prompt” as an Administrator like in the previous methods.
• When the black Command Prompt window opens, you have to enter the commands separately which are given below:
• • First command: net stop wuauserv.
  • Second command: net stop cryptSvc.
  • Third command: net stop bits.
  • Fourth command: net stop msiserver.

• In the next step, you have to rename the SoftwareDistribution folder by entering “ren C: WindowsSoftwareDistribution SoftwareDistribution.old in the command line of the Command Prompt.
• Now, hit the Enter key form your keyboard.
• After that, you have to enter the next command in the command line. The command is “ren C: WindowsSystem32catroot2 Catroot2.old”. Again, you have to press the Enter key from your keyboard.
• In the next step, you have to reset the stopped services by entering the following commands in the command line:
  • First command: net start wuauserv.
  • Second command: net start cryptSvc.
  • Third command: net start bits.
  • Fourth command: net start msiserver.
• Then, you have to exit the Command Prompt window and reboot your system.
• After the system restarts, check if the Windows error code occurs or not.

Therefore, this is how you can reset the Windows Update components in order to fix the issue. However, if you want to know more methods of the fixing process, then you can follow the rest section of the article.

Method 5: Check if the Date and Time Settings are Correct

The error 0x80073701 can also occur if the Date and Time settings are incorrect. Therefore, you have to fix the issue by fixing the Date and Time settings. If in case, you are not familiar with the steps of the process, then you can take out help. Hence, you can follow the steps that are given below:

• First of all, you have to open the Start menu and type ‘date’ in the search bar of the Start menu.
• Now, you have to click on the Date and Time settings option to open its window.
• In the next step, you have to set the time zone in the Time Zone drop-down menu, if required.
• Additionally, you can also toggle the Set the time automatically option off. Then, you have to click on the Change button to manually adjust the date and time settings.
• Alternatively, you can sync the clock with the server by clicking on the Add clocks for different time zones option.
• Then, you have to select the Internet Time tab and press the Change button to save the new settings.
• In the next step, you have to press the OK button to close the window. Next, you have to click on the Apply button and click on the OK button to save all the new changes.

Therefore, these steps will help you to fix the Date and Time settings which in turn will fix the Windows error 0x80073701. Hence, now you will definitely fix the Windows Update issue. If in case, you are still getting the same Windows issue, then follow the next method of the fixing process.

Method 6: Restore the Windows Operating System

Restoring the Windows Operating System to its previous version can help you to resolve the Windows error 0x80073701. Therefore, in order to follow the steps, you can have a look at the section below:

• Start your system and then login as an administrator. In the search bar of the Start menu, you have to type System Restore.
• Form the list of results, you have to click on the System Restore option. This action will open up the Windows System Restore window.
• Now, inside the Windows System Restore window, choose the Restore my computer to an earlier time option. After that, click on the Next button.
• In the next step, choose the most recent point and again, click on the Next button to continue.
• Wait for the Windows System to restore and then reboot the system.
• When the system restores, you now can check if the Windows Update issue is resolved or not.

We hope that restoring your Windows Operating System can help you to fix the Windows error 0x80073701 easily. Hence, if you want to know another method of the fixing process, then you can follow the next section of the article below.

Method 7: Remove the Previous Windows Update

Removing the last Windows Update can help to fix the Windows error code. However, if you don’t know the steps, then you can follow the steps that are given below:

• In the first step, you have to open the Start menu and then type Command Prompt in the search bar of the Start menu.
• Now, run the Command Prompt as an administrator. A black Command Prompt window will open.
• Now, you have to type the command in the command line of the Command Prompt. The command is: wusa /uninstall /KB:3172605.
• When the command completes its execution, you can check if the Windows Update issue is still there or not.

So this is how you can fix the Windows error by removing the previous Windows Update. Hopefully, now you were able to fix the issue on your own.

Bottom Lines

Now, we are at the end of this article, discussing all the causes and methods. So these were all the methods that will help you to fix the Windows error 0x80073701. Therefore, try out all the methods to get the best resolving results. If in case, you are facing any issue in performing the steps of the resolving methods, then you can get back to us through the comments section below.