Type to search

Amazing Techniques to Fix Epson Printer Error Code 031008

One of the errors that you may come across on your Epson printer is Epson printer error code 031008. This error primarily creeps in when you fail to insert the ink cartridges or the printhead into your printer. Moreover, you can also come across this error during an ongoing printing process. If there is dust accumulation on the scanner or inside the printhead, then this can also be the cause behind Epson error 031008. In this article, you will get to know the causes along with the effective measures to resolve this issue.

What Generates Epson Printer Error 031008?

Epson printer error code 031008 is a little problematic issue. Hence, you must know the potential causes behind this frustrating glitch so that you can troubleshoot it accordingly.

  • The printer stops functioning and displays this error when the ink cartridge is empty or the ink level is completely low.
  • Improper cartridge installation may result in this error.
  • Even foreign particles can disrupt the printing performance and result in Epson printer error code 031008.
  • When you connect your printer to the computer by a USB cable, your printer may display this particular error if the USB cable is broken or damaged.
  • If your printer cartridges are not compatible, your printer can’t print and can show this particular error.
  • A faulty printer driver is another cause behind this frustrating error.

How to Fix Epson Printer Error Code 031008?

Error Code 031008 is one of the most common glitches that can disrupt your work for an indefinite time period. While printing some important documents, this printer error may crop up without any prior intimation. In case, you are struggling with this particular glitch and unable to resolve it on your own, treat this write-up as your helping hand.

Go through the methodologies mentioned hereunder and fix your Epson printer error code 031008 straight away!

Fix 1: Restart your Printer

You might be surprised to know that most of the printer error codes disappear once you restart your machine. Keep an eye on the steps that we have come up with and get your bugs fixed in no time.

  • At first, begin with removing the power cable from the power outlet.
  • Next, tap on the power button and hold it for near about a minute.
  • Then, you need to plug in the power cable in the outlet again.
  • The moment you see the printer is turned on, leave the power button immediately.
  • Finally, you need to take a print as a sample in order to check whether the error is eliminated.

Fix 2: Perform a Hard Reset of the Printer

Printer reset is indeed complicated and involves a series of complex processes. Only if you are confident, then only perform this step. Keep in mind that a little mistake can ruin your device and disrupt the entire work process. We have listed a series of easy steps if you want to reboot your Epson printer.

  • At first, switch off your printer and take out the power cord from the outlet.
  • Then, wait for a couple of minutes and put in the plug again.
  • After that, turn on your printer and press the resume key for another 10 to 20 seconds.
  • At that time, you will come across a message saying “reset the printer to its default settings” in the control panel of your device.
  • Tap on the option “OK” and finally release the resume key.
  • Lastly, take a sample print to inspect whether the issue is resolved.

If you still come across Epson error 031008, it clearly states that the problem is with the cartridge or the printhead. You need to immediately clean and reinstall these two important components to fix Epson printer error code 031008.

You can learn how to clean the printhead or reset the ink cartridges in the following sections.

Fix 3: Reset the Ink Cartridge

Ink cartridge forms an essential part of any printer. It maintains the smooth flow of ink into the printer for generating the printouts. If the ink cartridge is not installed properly, Epson printer error 031008 might crop up during an ongoing printing session. Here’s how you can reset the ink cartridge most effectively.

  • To begin with, at first, power off the printer and remove all the cords and cables attached to it.
  • Next, open the cartridge cover and then remove the ink cartridge from your Epson printer.
  • Then, clean it smoothly with a dry cotton cloth and finally reinsert it again.
  • Next, tap on the reset button against all the chip contacts present on the cartridge.
  • At this time, you will see a bright red light blinking which points out that a strong contact is established between the printer and the cartridge.
  • Then hold the reset button for about few seconds until you see a green LED light begins to blink.
  • This finally indicates successful completion of the cartridge reset process.

Fix 4: Clean the Printhead of your Epson printer

You can clean the printhead of your Epson printer by both the automatic and manual process. If you want to avail the automatic process, you can follow the printer manual that comes with your device. For manual cleaning, keep an eye on the steps mentioned below.

  • At first, unplug the power cords and turn off your printer.
  • Take out both the ink cartridges and the printhead by opening the latch behind.
  • Next, take a dry cotton cloth and then clean the printhead contacts very carefully.
  • In the next step, place the printhead once again within the device and use the latch to set it in its proper location.
  • After that, place the ink cartridges within the printer again.

The steps listed above are tried and tested so you can definitely give them a try. Try to apply each one of them very carefully and attentively. Remember, a minor mistake can damage your Epson printer and you will no longer be able to work with it. For further queries and updates on printer solutions, do follow our posts regularly.