Driver WUDFRd Failed To Load: Troubleshooting With Easy Steps

Driver wudfrd failed to load error message appears most generally when upgrading your system to Windows 10. When you try to upgrade your system to Windows 10, a conflict is generated because of drivers being overwritten by Microsoft drivers and hence you get such error. This error may also be the result of the user-mode driver framework of Windows Foundation that is not enabled or is not started.

In this article, we are discussing the most accurate ways to fix this WUDFRd driver issue. If you want to fix this error in no time then go through the full article and follow all the methods as mentioned below.

What is WUDFRd?

Wudfrd is a Windows driver. A driver is a type of small application or program which enables a computer to communicate with the available hardware and the devices connected to it. Sometimes, you get an error message related to the USB drivers reading “driver wudfrd failed to load” and it generally occurs with an Event ID 219. It occurs because of device driver failure and malfunctioning of the devices.

How to Fix the ‘WUDFRd Failed to Load for the Device’ Issue?

There are a number of fixes or solutions available for the wudfrd failed to load for the device issue. We are providing you the most accurate and effective fixes which will let you fix the error with ease and in the simplest possible way.

Method 1:- Update Windows OS

Sometimes, an outdated version of the Windows is a reason for the error. Therefore, you must keep your Windows OS updated. Follow the instructions given below to update the Windows.

1. Press the shortcuts Windows + I  and choose Update & Security from the list.
2. Click on Check for updates and try to install all the pending updates available.
3. Restart your system after the successful installation of the updates to fix the issue

Method 2:- Reset Windows Driver Foundation to Automatic

If the Windows Driver Foundation is not running then it may cause such error. Therefore, running the Windows driver foundation and resetting it to automatic can fix this issue. To do so, do as instructed below.

1. Press the shortcuts Windows + R, type services.msc in the Run box and press Enter.
2. Navigate and right click on the Windows Driver Foundation – User-mode Driver Framework service from the list. Then, tap on Properties from the Options menu. A new window will appear.
3. Click on Startup type and set it to Automatic. Then check the Service status. If it is not running then tap on Start.
4. Tap on Apply and then on OK to exit the window.
5. Restart the system to fix the issue.

Method 3: Disable Hard Disk Hibernation

1. Go to the Power icon on the bottom right of the screen and right click on it. Click on Power Option.
2. Click on the Change plan settings from the new window.
3. Select Change advanced power setting at the bottom left of the window.
4. Double click on Hard disk and then again double click on Turn off hard disk after.
5. Modify the On battery mode and plugged in mode to Never.
6. Now, restart the Windows system to fix the error.

Method 4: Re-install USB Controller

1. Press the shortcut Windows + R key from your keyboard and write devmgmt.msc command to launch the Device Manager.
2. Double click on USB Controllers, right click on all the controllers and select Uninstall from the Options menu.
3. Click Ok on the confirmation window.
4. Following this further, restart your system to fix the error and reinstall all the controllers automatically.

That’s it! If you have followed and performed the actions mentioned above, you have probably fixed and solved the driver wudfrd failed to load issue successfully. However, if you still have some queries related to this error, you can ask them in the comment section below.